Wood Heater Regulations
- New Source Performance Standards and State Implementation Plans
- National Emission Standards for Hazardous Air Pollutants (NESHAPS) Air Toxics
- Stratospheric Ozone
- Wood Heaters
- 112(r) General Duty Clause and Risk Management Plans
- Mobile Sources
- Asbestos Demolition and Renovation
- Acid Rain inspection and trading programs
- Applicability Determination Index
The New Source Performance Standard for Residential Wood Heaters at 40 CFR Part 60 Subpart AAA (PDF) (175K, 19 pages, About PDF) was promulgated in 1988 as part of a regulatory negotiation process with the hearth industry and non-governmental organizations to reduce particulate emissions from wood stoves. The wood heater regulation requires wood stove manufacturers to undergo emissions testing at an EPA-accredited laboratory to certify that each wood stove model line complies with the particulate emission limit of 7.5 grams/hour for non-catalytic wood stoves and 4.1 grams/hour for catalytic wood stoves. The rule also requires manufacturers to conduct a quality assurance program for production-line wood heaters and to certify by a permanent label that each wood heater meets the applicable emission standard. A temporary label is also required for use by the consumer, that specifies the emission rate, the heating range of the wood heater and overall efficiency.
Wood Stoves with a firebox volume of less than 20 cubic feet, an air to fuel ratio of less than 35 to 1, a burn rate of less than 5 kg/hr and a total weight of less than 800 kg are subject to the EPA wood stove regulations.