Jump to main content.


Inspection Tool for the Miscellaneous Organic Chemical Manufacturing NESHAP

The Inspection Tool for the Miscellaneous Organic Chemical Manufacturing National Emission Standards for Hazardous Air Pollutants (NESHAP) provides guidance on performing inspections under Part 63 of the Clean Air Act (CAA) at facilities subject to 40 CFR Part 63 Subpart FFFF.

The Tool includes applicability flow charts and procedures for conducting inspections of emissions points for process vents, storage tanks, transfer racks, wastewater, heat exchangers, equipment components and devices used to comply with the standards. The Tool also provides checklists for determining compliance with the record keeping and reporting provisions of the rule. These procedures are fundamental for ensuring compliance with the standards under the CAA.

You will need Adobe Reader to view some of the files on this page. See EPA's PDF page to learn more.

Use a high-speed connection to download the following extremely large file.

Full document (PDF) September 2006 (240 pp, 2.93MB)

The Inspection Tool for the Miscellaneous Organic Chemical Manufacturing NESHAP by Sections:

Sections 1 and 2 (PDF) (21 pp, 450K)

Sections 3 and 4 (PDF) (47 pp, 967K)

Section 5 (PDF) (36 pp, 713K)

Section 6, 7, 8 and 9 (PDF) (34 pp, 598K)

Appendices (PDF)(34 pp, 598K)

Top of Page

Compliance Assistance | Compliance Monitoring | Compliance Incentives

 


Local Navigation



Jump to main content.