Jump to main content or area navigation.

Contact Us

Area Designations for 1997 Fine Particle (PM2.5) Standards

Recommendations for Areas to Be Designated "Nonattainment" for the Fine Particle National Air Quality Standards

ACTION

  • On June 28 and 29, 2004, the Environmental Protection Agency (EPA) sent letters to state and tribal representatives responding to their recommendations for areas meeting and not meeting the national air quality standards for fine particles (PM2.5). This action starts a 120 day period for the states and tribes to respond to EPA’s modifications to their attainment/nonattainment area recommendations.
  • EPA will make final designations of attainment, unclassifiable and nonattainment in November 2004.
  • Areas not meeting the national air quality standards are called nonattainment areas. These areas have had (or have contributed to) PM2.5 levels higher than allowed under EPA’s national air quality standard. The standard is designed to protect the public from exposure to PM2.5 at levels that may cause health problems. While fine particles are unhealthy for anyone to breathe, people with heart or lung disease, older adults, and children are especially at risk.
  • States and tribes will have the opportunity to comment on EPA’s recommendations on EPA’s modifications to their recommendations, and to provide new information and analyses if necessary. States and tribes made their initial recommendations in February of 2004.
  • The designations process plays an important role in letting the public know whether air quality in their area is healthy. Once designations take effect, they become an important component of state, local and tribal governments’ efforts to reduce fine particle pollution. By law, nonattainment areas are subject to a number of requirements to reduce particles and the pollutants that form them.
  • States and tribes with designated nonattainment areas must submit plans by February 2008 that outline how they will meet the PM2.5 standards. Areas are required to attain clean air by 2010. EPA may grant attainment date extensions of up to five years in areas with more severe PM2.5 problems and where emissions control measures are not available or feasible.
  • The Bush Administration has made the reduction of fine particle pollution a critical element of a comprehensive national clean air strategy. This strategy includes EPA’s recent rule to reduce pollution from nonroad diesel engines, and the proposed rule to reduce pollution from power plants in the eastern U.S. These two rules are important components of EPA’s efforts to help states and localities meet the more protective national fine-particle and 8-hour ozone air quality standards. Together these rules will help all areas of the country achieve cleaner air.

ABOUT DESIGNATIONS

  • In November, when EPA makes final attainment and nonattainment designations, many areas across the country will need to take action to improve their air quality.
  • Areas that will be designated attainment will have monitored air quality that meets the level of EPA’s health based national air quality standards for fine particle pollution. While these areas will not have to take steps to improve air quality they must prevent their air quality from deteriorating.
  • The Clean Air Act requires state, local and tribal governments to take steps to control particle pollution in nonattainment areas. Those steps may include stricter controls on industrial facilities, and additional planning requirements for transportation sources.
  • State, local and tribal governments must detail these control requirements in plans demonstrating how they will meet the PM2.5 national air quality standard. Those plans are known as state or tribal implementation plans, or SIPs/TIPs. States and tribes must submit their plans to EPA within three years after the Agency makes final designations (by February 2008).
  • Nonattainment areas are subject to a measure known as “transportation conformity,” which requires local transportation and air quality officials to coordinate planning to ensure that transportation projects, such as road construction, do not affect an area’s ability to reach its clean air goals. Transportation conformity requirements become effective one year after an area is designated as nonattainment.
  • Once designated, nonattainment areas also are subject to new source review requirements. New Source Review is a permitting program for industrial facilities to ensure that new and modified sources of pollution do not impede progress toward cleaner air.
  • In February and April 2003, EPA provided guidelines to states and tribes for recommending nonattainment area boundaries for the PM2.5 standard. The guidance instructed states and tribes to begin their analysis of attainment and nonattainment area boundaries based on the boundaries of metropolitan areas. The guidances also instructed states to include in nonattainment areas any nearby counties contributing to fine particle pollution in those metropolitan areas. The guidances also recommended that states and tribes consider using common boundaries for areas to be designated as nonattainment for both the PM2.5 and 8-hour ozone standards. Common boundaries will help states and tribes facilitate future planning and implementation activities.
  • EPA instructed states and tribes to use metropolitan area boundaries to ensure that they consider population density, traffic and commuting patterns, commercial development and area growth when recommending areas for attainment and nonattainment designation.
  • EPA also asked states and tribes to consider the following factors as they developed their boundary recommendations:
    • emissions and air quality in adjacent areas
    • population density and commercial development in adjacent areas
    • traffic and commuting patterns
    • extent, pattern and rate of growth
    • weather and transport patterns
    • mountains or other air basin boundaries
    • jurisdictional boundaries
    • level of control of emission sources

ABOUT THE FINE PARTICLE STANDARDS

  • In July 1997, EPA issued National Ambient Air Quality Standards for Fine Particles (PM2.5). The standards include an annual standard set at 15 micrograms per cubic meter, based on the 3-year average of annual mean PM2.5 concentrations and a 24-hour standard of 65 micrograms per cubic meter, based on the 3-year average of the 98th percentile of 24-hour concentrations.
  • A number of events delayed the implementation of the PM2.5 standard.
    • EPA's new standards were challenged by the American Trucking Association, the U.S. Chamber of Commerce and other state and business groups.
    • The Transportation Equity Act for the Twenty-first Century (TEA-21) revised the deadline to publish nonattainment designations in order to provide additional time to collect three years of air quality monitoring data.
    • In February 2001, the Supreme Court upheld EPA's authority under the Clean Air Act to set National Ambient Air Quality Standards that protect the American public from harmful effects of air pollution. The Supreme Court also sent the case back to the D.C. Circuit Court of Appeals to resolve several additional issues. In March 2002, the DC Circuit Court rejected all remaining legal challenges to EPA's 1997 ambient air quality standards for PM2.5.
  • The health effects associated with exposure to fine particles are significant. Epidemiological studies have shown a significant correlation between elevated fine particle levels and premature mortality. Other important effects associated with fine particle exposure include aggravation of respiratory and cardiovascular disease (as indicated by increased hospital admissions, emergency room visits, absences from school or work, and restricted activity days), lung disease, decreased lung function, asthma attacks, and certain cardiovascular problems such as heart attacks and cardiac arrhythmia.
  • Individuals particularly sensitive to fine particle exposure include older adults, people with heart and lung disease, and children.

FOR MORE INFORMATION

  • For more information on the designation process for the fine particle standards, go to EPA’s Web site at www.epa.gov/pmdesignations.

Jump to main content.