EPA On-line Tools for Site Assessment Calculation
The On-Site calculators have a variety of applications,
some of which are listed below.
Briefly, the models for transport from fuel or pulse sources are highly
self-contained.
All required inputs and necessary databases are directly linked to these calculators.
Many of the components of the models, however, are available as separate calculators
which can be used for planning site investigations, preparing model input parameters,
for reviewing modeling reports, or
for assessing contaminant impacts at sites.
The following lists common uses for the models and components.
- Planning Site Investigations
- Scale the Hydraulic Gradient from a water table map.
- Determine the travel time to determine where a monitor
well should be placed.
-
Evaluate the prospects for
plume diving
in order to place well screens
at the appropriate depth.
- Model transport from a leaking underground storage tank
to see how far contaminants might have traveled since the release date.
- Preparation of Model Input Data/Reviewing Modeling Reports
Inputs for models are developed from site-specific data, literature values, estimation formulas and other
sources. On-Site calculators are available for a variety of common input parameters.
- Assessing the Impacts of Contamination at a Site
- Review the distribution of mass when a fuel is present
in the subsurface.
- Determine the travel time to a sensitive receptor.
- Estimate the age of a release from the highest contaminant concentration observed at a site using
the
effective solubility calculator.
- Model transport from a leaking underground storage tank.
![[logo] US EPA](http://www.epa.gov/epafiles/images/logo_epaseal.gif){kind=logo}