Jump to main content.


Basic Information

photo collage and SF6 Emission Reduction Partnership for Electric Power Systems logo

Introduction

The most common use for SF6, both domestically and internationally, is as an electrical insulator in high voltage equipment that transmits and distributes electricity. Since the 1950’s the U.S. electric power industry has used SF6 widely in circuit breakers, gas-insulated substations, and other switchgear used in the transmission system to manage the high voltages carried between generating stations and customer load centers.

Several factors affect SF6 emissions from electric power systems, such as the type and age of the SF6 containing equipment (e.g. older circuit breakers can contain up to 2,000 pounds of SF6, while modern breakers usually contain less than 100 pounds), and the handling and maintenance procedures practiced by electric utilities. Because of its long life span and high GWP potency, even a relatively small amount of SF6 can have a significant impact on our climate.

The SF6 Emission Reduction Partnership is one of EPA’s voluntary industry programs aimed at reducing greenhouse gas emissions. The Partnership’s primary objective is to reduce SF6 emissions via cost-effective technologies and practices. Through improvements in the leak rate of new equipment, refurbishing of older equipment, and the use of more efficient operation and maintenance techniques, utilities often find economical solutions to reduce SF6 emissions.

Top of page


Emissions

The electric power industry uses roughly 80% of all SF6 produced worldwide. Ideally, none of this gas would be emitted into the atmosphere. In reality significant leaks occur from aging equipment, and gas losses occur during equipment maintenance and servicing. With a global warming potential 23,900 times greater than CO2 and an atmospheric life of 3,200, one pound of SF6 has the same global warming impact of 11 tons of CO2. In 2011, U.S. SF6 emissions from the electric power industry were estimated to be 7.0 Tg CO2 Eq. For more information on the U.S. SF6 emissions from electric power systems see Sources and Emission on the High GWP home page.

Top of page


Opportunities for Electric Power Systems

The electric power industry has an enormous opportunity to help reduce the nation’s SF6 emissions through cost-effective operational improvements and equipment upgrades. With a range in costs from $8.00 to $12.00 per pound, the SF6 emission reduction of partner companies from 1999-2010 totals $23.1 million to $34.7 million respectively.

EPA works to share information on best management practices and technical issues that can help reduce emissions. EPA also sponsors SF6 conferences where partners and others from the industry can stay informed of the latest developments in this area. The most promising and cost effective options to reduce SF6 emissions are:

More detailed cost information is available at EPA’s High GWP Projections and Mitigation page.

Top of page


Commitment and Responsibilities

Partners agree to:

EPA assists partners by:

Top of page


Local Navigation


Jump to main content.