![[logo] US EPA](http://www.epa.gov/epafiles/images/logo_epaseal.gif){kind=logo}
Certain New Chemicals; Receipt and Status Information
Note: EPA no longer updates this information, but it may be useful as a reference or resource.
[Federal Register: December 7, 2001 (Volume 66, Number 236)] [Notices] [Page 63537-63544] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr07de01-32] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [OPPTS-51979; FRL-6815-6] Certain New Chemicals; Receipt and Status Information AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new Chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the Chemicals under review and the receipt of notices of commencement to manufacture those Chemicals. This status report, which covers the period from September 17, 2001 to October 24, 2001, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. The ``S'' and ``G'' that precede the chemical names denote whether the chemical idenity is specific or generic. DATES: Comments identified by the docket control number OPPTS-51979 and the specific PMN number, must be received on or before January 7, 2002. ADDRESSES: Comments may be submitted by mail, electronically, or in person. Please follow the detailed instructions for each method as provided in Unit I. of the SUPPLEMENTARY INFORMATION. To ensure proper receipt by EPA, it is imperative that you identify docket control number OPPTS-51979 and the specific PMN number in the subject line on the first page of your response. FOR FURTHER INFORMATION CONTACT: Barbara Cunningham, Director, Office of Program Management and Evaluation, Office of Pollution Prevention and Toxics (7401), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460; telephone number: (202) 554-1404; e- mail address: TSCA-Hotline@epa.gov. SUPPLEMENTARY INFORMATION: I. General Information A. Does This Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT. B. How Can I Get Additional Information, Including Copies of This Document and Other Related Documents? 1. Electronically. You may obtain copies of this document and certain other available documents from the EPA Internet Home Page at http://www.epa.gov/. On the Home Page select ``Laws and Regulations'','' Regulations and Proposed Rules, and then look up the entry for this document under the ``Federal Register--Environmental Documents.'' You can also go directly to the Federal Register listings at http://www.epa.gov/fedrgstr/. 2. In person. The Agency has established an official record for this action under docket control number OPPTS-51979. The official record consists of the documents specifically referenced in this action, any public comments received during an applicable comment period, and other information related to this action, including any information claimed as confidential business information (CBI). This official record includes the documents that are physically located in the docket, as well as the documents that are referenced in those documents. The public version of the official record does not include any information claimed as CBI. The public version of the official record, which includes printed, paper versions of any electronic comments submitted during an applicable comment period, any test data submitted by the Manufacturer/Importer is available for inspection in the TSCA Nonconfidential Information Center, North East Mall Rm. B-607, Waterside Mall, 401 M St., SW., Washington, DC. The Center is open from noon to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number of the Center is (202) 260-7099. C. How and to Whom Do I Submit Comments? You may submit comments through the mail, in person, or electronically. To ensure proper receipt by EPA, it is imperative that you identify docket control number OPPTS-51979 and the specific PMN number in the subject line on the first page of your response. 1. By mail. Submit your comments to: Document Control Office (7407), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460. 2. In person or by courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Building Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. 3. Electronically. You may submit your comments electronically by e-mail to: ``oppt.ncic@epa.gov,'' or mail your computer disk to the address identified in this unit. Do not submit any information electronically that you consider to be CBI. Electronic comments must be submitted as an ASCII file avoiding the use of special characters and any form of encryption. Comments and data will also be accepted on standard disks in WordPerfect 6.1/8.0 or ASCII file format. All comments in electronic form must be identified by docket control number OPPTS-51979 and the specific PMN number. Electronic comments may also be filed online at many Federal Depository Libraries. [[Page 63538]] D. How Should I Handle CBI That I Want to Submit to the Agency? Do not submit any information electronically that you consider to be CBI. You may claim information that you submit to EPA in response to this document as CBI by marking any part or all of that information as CBI. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public version of the official record. Information not marked confidential will be included in the public version of the official record without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the person listed under FOR FURTHER INFORMATION CONTACT. E. What Should I Consider as I Prepare My Comments for EPA? You may find the following suggestions helpful for preparing your comments: 1. Explain your views as clearly as possible. 2. Describe any assumptions that you used. 3. Provide copies of any technical information and/or data you used that support your views. 4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide. 5. Provide specific examples to illustrate your concerns. 6. Offer alternative ways to improve the notice or collection activity. 7. Make sure to submit your comments by the deadline in this document. 8. To ensure proper receipt by EPA, be sure to identify the docket control number assigned to this action in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation. II. Why Is EPA Taking This Action? Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new Chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the Chemicals under review and the receipt of notices of commencement to manufacture those Chemicals. This status report, which covers the period from September 17, 2001 to October 24, 2001, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. Receipt and Status Report for PMNs and TMEs This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available. The ``S'' and ``G'' that precede the chemical names denote whether the chemical idenity is specific or generic. In table I, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity. I. 102 Premanufacture Notices Received From: 09/17/01 to 10/24/01 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- P-01-0921 09/17/01 12/16/01 Arch Chemicals, Inc. (S) Component in a (G) Derivatized photoresist ethoxylated formulation to be polystyrene resin use in the manufacture of semiconductor and related devices P-01-0922 09/17/01 12/16/01 Xerox Corporation (G) Open, non- (G) Copper dispersive use as a phthalocyanine constituent in solid, crayon like inks for computer printers P-01-0923 09/17/01 12/16/01 CBI (G) Ingredients for (G) Cycloalkyl use in consumer acetate products: highly dispersive use P-01-0924 09/17/01 12/16/01 CBI (G) Ingredients for (G) Carbo cyclic use in consumer oxime products: highly dispersive use P-01-0925 09/17/01 12/16/01 CBI (G) Sealant (G) Substituted methoxysilane P-01-0926 09/17/01 12/16/01 CBI (G) Sealant (G) Acrylic polymer P-01-0927 09/18/01 12/17/01 CBI (G) An open, non- (G) Polycarbonate and dispersive use polyester-type polyurethane P-01-0928 09/18/01 12/17/01 CBI (G) Catalyst (G) Alkoxysilane P-01-0929 09/19/01 12/18/01 BASF Corporation (S) Protective (S) 1,3- colloid benzenedicarboxylic acid, 5-sulfo-, monosodium salt, polymer with 1,3- benzenedicarboxylic acid, 1,4- benzenedicarboxylic acid, 1,2- ethanediol, 2,2'- [1,2- ethanediylbis(oxy)]b is[ethanol] and 2,2'- oxybis[ethanol] P-01-0930 09/18/01 12/17/01 International Flavors (S) Raw material for (S) 3-hexene, 1-[(2- and Fragrances, Inc. use in fragrances methyl-2- for soaps, propenyl)oxy]-, (3z)- detergents, cleaners and other household products [[Page 63539]] P-01-0931 09/21/01 12/20/01 The Goodyear Tire and (S) Polymerization (G) Neodymium ziegler- Rubber Company catalyst natta catalyst P-01-0932 09/24/01 12/23/01 CBI (S) Coatings; (G) Aliphatic epoxide additives P-01-0933 09/24/01 12/23/01 CBI (G) Open, non- (G) Aromatic dispersive use alkanoate P-01-0934 09/24/01 12/23/01 CBI (G) This product will (G) Polymeric polyol be used to manufacture flexible polyurethane foam P-01-0936 09/26/01 12/25/01 Crompton Corporation (G) Catalyst (S) Zirconium, dichloro[rel- (7ar,7'ar)-1,2- ethanediylbis[(1,2,3 ,3a,7a-.eta.)- 4,5,6,7-tetrahydro- 1h-inden-1-ylidene]]- P-01-0937 09/21/01 12/20/01 The Procter and (S) Industrial (S) Fatty acids, C16- Gamble Company lubricant for metal 18 and C18-unsatd., finishing esters with sucrose P-01-0938 09/21/01 12/20/01 The Procter and (S) Industrial (S) Fatty acids, C18 Gamble Company lubricant for metal and C18-unsatd., finishing esters with sucrose P-01-0939 09/21/01 12/20/01 The Procter and (S) Industrial (G) Methyl esters of Gamble Company lubricant for metal long-chain fatty finishing acids and sucrose P-01-0940 09/21/01 12/20/01 The Procter and (S) Industrial (S) alpha-d- Gamble Company lubricant for metal glucopyranoside, finishing beta-d- fructofuranosyl, docosanoate P-01-0941 09/21/01 12/20/01 The Procter and (S) Industrial (S) alpha-d- Gamble Company lubricant for metal glucopyranoside, finishing beta-d- fructofuranosyl, hexadecanoate P-01-0942 09/21/01 12/20/01 The Procter and (S) Industrial (S) alpha-d- Gamble Company lubricant for metal glucopyranoside, finishing beta-d- fructofuranosyl, (9z)-9-octadecenoate P-01-0943 09/26/01 12/25/01 CBI (G) Coating (G) Methylsiloxane application polymer P-01-0944 09/26/01 12/25/01 CIBA Specialty (S) Pigment for use (G) Benzenesulfonic Chemicals in plastics acid derivative, Corporation salt P-01-0945 09/26/01 12/25/01 CBI (G) Acrylic polymer (G) Copolymer of for use in a coating alkyl acrylates and application alkyl methacrylates P-01-0946 09/27/01 12/26/01 CBI (G) Destructive use (G) Alkoxylated fatty as a chemical amine intermediate P-01-0947 09/25/01 12/24/01 CBI (G) Open, non- (G) Meko blocked dispersive (resin) aromatic polyisocyanate based on tdi P-01-0948 09/28/01 12/27/01 CBI (G) Conductive agent (G) Spiro arylamine derivative P-02-0001 10/01/01 12/30/01 CBI (G) Coating material (G) Acrylic polymer on the basis of methyl methacrylate and n-butyl methacrylate P-02-0002 10/01/01 12/30/01 CBI (G) Colorant for (G) Polyimide printing inks terminated, polyester/ polyamide graft to styrene/ acrylic polymer P-02-0003 10/02/01 12/31/01 CBI (G) Contained use in (G) sealed electrical Tetraalkylammonium components salt P-02-0004 10/02/01 12/31/01 CBI (G) Open, non- (G) Aqueous dispersive use in a polyurethane coating application dispersion P-02-0005 10/02/01 12/31/01 CBI (G) Open, non- (G) Aqueous dispersive use in a polyurethane coating application dispersion P-02-0006 10/02/01 12/31/01 CBI (G) Contained use in (G) sealed electrical Tetraalkylammonium components salt P-02-0007 10/02/01 12/31/01 CBI (G) Destructive use (G) Maleic acid as chemical monoester intermediate P-02-0008 10/04/01 01/02/02 CBI (G) Destructive use (G) Maleic acid as chemical monoester intermediate P-02-0009 10/02/01 12/31/01 Dow Corning (S) Lubricant for (S) Silsesquioxanes, Corporation fibers 2(or 3)-methylbutyl, hydroxy-terminated P-02-0010 10/01/01 12/30/01 CBI (G) Flocculant (G) N-substituted-2- methyl-2- propenamide, polymer with 2-propenoic acid, sodium salt P-02-0011 10/01/01 12/30/01 CBI (G) Flocculant (G) N-substituted-2- methyl-2- propenamide, polymer with 2-methyl-2- propenoic acid and 2- propenoic acid, sodium salt P-02-0012 10/01/01 12/30/01 CBI (G) Flocculant (G) N-substituted-2- methyl-2- propenamide, polymer with 2-propenamide and 2-propenoic acid, sodium salt P-02-0013 10/01/01 12/30/01 CBI (G) Flocculant (G) N-substituted-2- methyl-2- propenamide, polymer with 2-methyl-2- propenoic acid, 2- propenamide and 2- propenoic acid, sodium salt [[Page 63540]] P-02-0014 10/04/01 01/02/02 CBI (G) Pigment (G) Maleated fatty dispersant acid P-02-0015 10/04/01 01/02/02 CBI (G) Additive for (G) Aliphatic paint benzoate ester P-02-0016 10/04/01 01/02/02 3M Company (G) Protective (G) Fluorochemical coating urethane P-02-0017 10/05/01 01/03/02 CBI (G) Colour transfer (G) Azo oil soluble printing dye P-02-0018 10/05/01 01/03/02 The Dow chemical (G) Paint additive (G) Polyalkoxylated Company alkyl carbamate P-02-0019 10/05/01 01/03/02 The Dow chemical (G) Paint additive (G) Polyalkoxylated Company alkyl carbamate P-02-0020 10/05/01 01/03/02 CBI (G) Ester wax (G) Ester wax P-02-0021 10/09/01 01/07/02 CBI (G) Dispersive use: (G) Modified oilfield performance polyamide chemical. P-02-0022 10/09/01 01/07/02 CBI (G) Dispersive use: (G) Modified fatty oilfield performance amide chemical. P-02-0023 10/09/01 01/07/02 CBI (G) Dispersive use: (G) Modified oilfield performance polyamide chemical. P-02-0024 10/09/01 01/07/02 CBI (G) Dispersive use: (G) Modified fatty oilfield performance amide chemical. P-02-0025 10/09/01 01/07/02 Chemetall chemical (G) Aluminum welding, (S) Aluminum cesium products, Inc. destructive use fluoride P-02-0026 10/05/01 01/03/02 CBI (S) Specialty grease (G) Mixed aliphatic thickener substituted bis-p- phenylene diurea P-02-0027 10/09/01 01/07/02 Solutia Inc. (S) Defoamer for (G) Modified fatty water based acid ester industrial coatings P-02-0028 10/09/01 01/07/02 CBI (S) Inherently (S) Lignosulfonic conducting polymer acid, ethoxylated, in corrosion control compounds with coatings polyaniline, hydrochlorides P-02-0029 10/09/01 01/07/02 CBI (S) Inherently (S) Lignosulfonic conducting polymer acid, ethoxylated, in corrosion control compounds with coatings polyaniline, p- toluenesulfonates P-02-0030 10/09/01 01/07/02 BASF Corporation (S) Processing aid (G) Counter ion of for leather tanning vegetable oil, oxidized and sulfited P-02-0031 10/05/01 01/03/02 Quest International (S) Fragrance (S) Cyclohexan-1-ol, Fragrances Co. ingredient 1-methyl-3-(2- methylpropyl)- P-02-0032 10/10/01 01/08/02 CIBA Specialty (S) Photoacid (G) Aromatic Chemicals generator for thiophene derivative Corporation resists in semiconductor and display mfg. P-02-0033 10/10/01 01/08/02 CBI (G) Dispersant for (G) Sodium salt of inorganic materials methacrylic acid, methylacrylate copolymer P-02-0034 10/11/01 01/09/02 CBI (S) Phenolic resin (G) Phenolic resin used as a raw material for photoresist P-02-0035 10/12/01 01/10/02 Burlington Chemical (S) Fabric softener (S) Ethanaminium, n- Company, Inc. ethyl-2-hydroxy-n,n- bis(2-hydroxyethyl)- , mono- and diesters with branched and linear C16-18 and C18-unsatd, fatty acids, et sulfates (salts) P-02-0036 10/12/01 01/10/02 Burlington Chemical (S) Component of (S) Imidazolium Company, Inc. automotive spray wax compounds, 2-(C15-17 and C17-unsatd. branched and linear alkyl)-1-ethyl-4,5- dihydro-3- (hydroxyethyl), et sulfates (salts) P-02-0037 10/12/01 01/10/02 Burlington Chemical (S) fabric softener; (S) Imidazolium Company, Inc. component of compounds, 2-(C15-17 automotive spray wax and C17-unsatd. branched and linear alkyl)-1-[2-(C16-18, and C18-unsatd. branched and linear amido)ethyl]-3-ethyl- 4,5-dihydro, et sulfates P-02-0038 10/11/01 01/09/02 CBI (G) Polymer for (G) Modified acrylic waterborne paints emulsion P-02-0039 10/11/01 01/09/02 CBI (G) Polymer for (G) Modified acrylic waterborne paints emulsion P-02-0040 10/12/01 01/10/02 CBI (G) Open non- (G) Modified dispersive polycarbonate (thermoplastic material) P-02-0041 10/12/01 01/10/02 Solutia Inc. (S) Binding agent for (G) Modified acrylic waterborne coatings copolymer P-02-0042 10/12/01 01/10/02 CBI (G) Acrylate resin (G) Hexanedioc acid, for the coating, polymer with 1,1'- adhesive and sealant methylenebis[4- industry isocyanatocyclohexan e] and a difunctional alcohol, 2- hydroxyethyl acrylate-blocked P-02-0043 10/12/01 01/10/02 BASF Corporation (S) Processing aid (G) Metal salt of an for leather tanning aliphatic acid P-02-0044 10/12/01 01/10/02 CIBA Specialty (S) Photoreactive dye (G) Copper Chemicals for recordable phthalocyanine Corporation compact discs(cd-r) derivative [[Page 63541]] P-02-0045 10/12/01 01/10/02 CBI (G) Antistatic agent; (G) Esterquat surfactant rinse aid; flotation reagent; surfactant rinse aid P-02-0046 10/12/01 01/10/02 CBI (G) Antistatic agent; (G) Esterquat surfactant rinse aid; flotation reagent; surfactant rinse aid P-02-0047 10/12/01 01/10/02 CBI (G) Antistatic agent (G) Esterquat surfactant rinse aid; flotation reagent; surfactant rinse aid P-02-0048 10/12/01 01/10/02 CBI (G) Antistatic agent (G) Esterquat surfactant rinse aid; flotation reagent; surfactant rinse aid P-02-0049 10/15/01 01/13/02 CBI (G) Gellant (G) Fatty acids, C18- unsatd., dimers, hydrogenated, polymers with fatty amines, ethylenediamine and 2-methyl-1,5- pentanediamine P-02-0050 10/15/01 01/13/02 CBI (G) Gellant (G) Fatty acids, C18- unsatd., dimers, polymers with fatty amines, ethylenediamine and 2-methyl-1,5- pentanediamine P-02-0051 10/15/01 01/13/02 CBI (G) Gellant (G) Fatty acids, C18- unsatd., dimers, hydrogenated, polymers with ethylenediamine, neopentyl glycol and fatty alcohol P-02-0052 10/15/01 01/13/02 CBI (G) Gellant (G) Fatty acids, C18- unsatd., dimers, polymers with ethylenediamine, neopentyl glycol and fatty alcohol P-02-0053 10/15/01 01/13/02 Solutia Inc. (S) Wetting agent for (G) Neutralized waterborne coatings acrylic copolymer P-02-0054 10/15/01 01/13/02 CBI (G) Open, non- (G) Aliphatic dispersive (resin) thermoplastic polyurethane P-02-0055 10/15/01 01/13/02 CBI (S) Aqueous (G) Dioic acid, dispersion of polymer with polyurethane for (substituted)diol, leather finishing hydrazine, hydroxypoly[(substit uted)diyl], (substituted)propano ic acid and [(substituted)cycloh exane], compound with (substituted)amine P-02-0056 10/16/01 01/14/02 Solutia Inc. (S) Dispersing agent (G) Modified for industrial phosphoric acid coatings group ester P-02-0057 10/16/01 01/14/02 Solutia Inc. (S) Binder for (G) Polycarboxylic industrial paints resin P-02-0060 10/17/01 01/15/02 Dow corning (S) Adhesion promoter (S) Poly[oxy(methyl- Corporation 1,2-ethanediyl)], alpha-hydro-w-(2- propenyloxy)-, ether with bis[ethyl 3- (oxo-k0)butanoato- k0']bis(1,2- propanediolato- k0)titanium (2:1) P-02-0061 10/17/01 01/15/02 Jeneil Biosurfactant (G) Agriculture (S) Decanoic acid, 3- Company chemical additive, [[6-deoxy-2-o-(6- additive for soil deoxy-.alpha.-l- remediation, mannopyranosyl)- additive for waste .alpha.-l- water treatment, mannaopyranosyl]oxy]- additive for , 1- petroleum tank (carboxymethyl)octyl cleaning and ester, mixture with hydrocarbon slugde 1- remediation, (carboxymethyl)octyl additive for 3-[(6-deoxy-.alpha.- cleaning l- formulations. mannopyranousyl)oxy] decanoate P-02-0062 10/18/01 01/16/02 CBI (G) Reactive hot melt (G) Reactive hot melt adhesive P-02-0063 10/19/01 01/17/02 Quest International (S) Fragrance (S) Fragrances Co. ingredient Cyclohexanecarboxyli c acid, 1,4-dimethyl- , methyl ester (cis and trans); cyclohexanecarboxyli c acid, 1,3-dimethyl- , methyl ester (cis and trans) P-02-0064 10/18/01 01/16/02 CBI (G) Open, non- (G) Copolymer from dispersive (resin) acrylic acid and diethylene glycol divinylether with carboxylic acid groups in h-form P-02-0065 10/19/01 01/17/02 CBI (G) Open, non- (G) Polyether - dispersive polycarbonat- (catalyst) carbamate P-02-0066 10/19/01 01/17/02 Nippon Kayaku (S) Photosensitive (S) Formaldehyde, America, Inc. oligomer for solder polymer with mask (chloromethyl)oxiran e and phenol, hydrogen 4- cyclohexene-1,2- dicarboxylate 2- propenoate [[Page 63542]] P-02-0067 10/19/01 01/17/02 Nippon Kayaku (S) Photosensitive (S) Formaldehyde, America, Inc. oligomer for solder polymer with mask (chloromethyl)oxiran e and 2- methylphenol, hydrogen 4- cyclohexene-1,2- dicarboxylate 2- propenoate P-02-0068 10/19/01 01/17/02 Dow Corning (S) Silicone matting (G) Organo silicone Corporation agent elastomer P-02-0069 10/24/01 01/22/02 Sasol North America (G) Solubilizer (S) Glycerides, mixed Inc. decanoyl and octanoyl mono-, di- and tri-,ethoxylated P-02-0070 10/24/01 01/22/02 CBI (G) Alkaline battery (S) 2-propenoic acid, component - polymer with sodium contained use 4- enclosed in battery ethenylbenzenesulfon container ate P-02-0071 10/24/01 01/22/02 CBI (G) Resin for coating (G) Acrylic copolymer P-02-0079 10/22/01 01/20/02 CBI (S) Tackifying resin (G) Polymer of phenol for adhesive and substituted formulations benzenes P-02-0080 10/24/01 01/22/02 BASF Corporation (S) Processing aid (G) Diglyceride fatty for leather tanning acid, acetylated P-02-0082 10/22/01 01/20/02 CBI (G) Polymeric binder (G) Strene- methacrylate copolymer P-02-0083 10/22/01 01/20/02 CBI (G) Polymeric binder (G) Strene- methacrylate copolymer P-02-0084 10/22/01 01/20/02 CBI (G) Polymeric binder (G) Strene- methacrylate copolymer P-02-0085 10/22/01 01/20/02 CBI (G) Polymeric binder (G) Strene- methacrylate copolymer -------------------------------------------------------------------------------------------------------------------------------------------------------- In table II, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received II. 3 Test Marketing Exemption Notices Received From: 09/17/01 to 10/24/01 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- T-02-0001 10/12/01 11/26/01 Westvaco Corporation - (S) Binding agent in (G) Butyl acrylate, chemical division paper coatings polymer with styrene and ,ethylamino chloride compounds, acetic acid salt T-02-0002 10/12/01 11/26/01 Westvaco Corporation - (S) Binding agent in (G) Butyl acrylate, chemical division paper coatings polymer with styrene and ,ethylamino chloride compounds, lactic acid salt T-02-0003 10/12/01 11/26/01 Westvaco Corporation - (S) Binding agent in (G) Butyl acrylate, chemical division paper coatings polymer with styrene and ,ethylamino chloride compounds, nitric acid salt -------------------------------------------------------------------------------------------------------------------------------------------------------- In table III, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received: III. 71 Notices of Commencement From: 09/17/01 to 10/24/01 ---------------------------------------------------------------------------------------------------------------- Commencement/Import Case No. Received Date Date Chemical ---------------------------------------------------------------------------------------------------------------- P-00-0065 10/15/01 09/17/01 (G) Amines, n-tallow alkylpoly-, hydrochlorides P-00-0066 09/17/01 08/29/01 (G) Amines, n-tallow alkylpoly- P-00-0099 10/11/01 09/12/01 (G) Fatty acid condensate P-00-0115 10/05/01 10/01/01 (S) 8-undecenal, (8z)- P-00-0118 09/24/01 09/18/01 (G) Unsaturated dialkyl acetal P-00-0482 09/20/01 08/24/01 (G) Alkyl methacrylate copolymer P-00-0736 09/27/01 09/04/01 (G) Polyester acrylate P-00-0802 10/16/01 09/14/01 (S) Rosin, polymd., compound with 2- (dimethylamino) ethanol P-00-1228 09/24/01 09/10/01 (G) Substituted benzophenone P-01-0013 09/17/01 09/17/01 (S) Oxacycloheptadec-11-en- 2-one P-01-0074 10/03/01 09/15/01 (G) Modified styrene acrylate polymer P-01-0121 10/02/01 08/29/01 (G) Aromatic saturated copolymer P-01-0122 09/26/01 09/14/01 (G) Acetate-substituted bicyclic olefin P-01-0130 10/24/01 10/08/01 (S) Sulfur, trifluoro[2- methoxy-n-(2- methoxyethyl)ethanaminato- kn]-, (t-4)- P-01-0161 09/17/01 08/24/01 (G) Aliphatic capped polyester P-01-0232 09/27/01 09/18/01 (G) Perfluoroalkyl derivative [[Page 63543]] P-01-0282 09/26/01 09/12/01 (G) Urethane acrylate P-01-0313 10/01/01 09/13/01 (G) Alkanoic acid diester P-01-0315 10/09/01 09/09/01 (G) Urethane acrylate dispersion P-01-0391 10/09/01 09/27/01 (G) Modified phenolic resin P-01-0399 09/26/01 09/24/01 (G) Polyacrylate, salt with polyalkylene glycolbutylether, phosphate P-01-0411 10/09/01 09/23/01 (G) Acrylic copolymer P-01-0412 09/21/01 09/19/01 (G) Acrylic copolymer P-01-0414 09/21/01 09/17/01 (G) Acrylic copolymer P-01-0416 09/21/01 09/18/01 (G) Acrylic copolymer P-01-0441 10/09/01 09/17/01 (G) Modified phenolic resin P-01-0444 09/21/01 08/23/01 (G) Hydroxy functional polyester resin P-01-0445 10/15/01 09/26/01 (G) Aminomodified silicone- polyether copolymer P-01-0451 09/25/01 08/21/01 (G) Fatty acid modified polyester P-01-0476 10/09/01 09/17/01 (G) O-macroalkyl hydroxylamine P-01-0482 10/09/01 09/09/01 (G) Modified polyurethane resin P-01-0496 09/17/01 09/05/01 (G) Acrylate ester P-01-0503 10/12/01 10/10/01 (G) Bis substituted amino benzenesulfonic acid, amine salt P-01-0530 09/19/01 08/24/01 (G) Alkoxylated alcohol P-01-0553 10/02/01 08/29/01 (G) Aromatic/aliphatic copolyester P-01-0554 10/02/01 08/29/01 (G) Copolyester P-01-0561 09/21/01 09/06/01 (G) Modified phenolic resin P-01-0562 09/17/01 08/29/01 (G) Water redispersible cationic acrylic copolymer P-01-0566 09/18/01 08/13/01 (G) Modified polyurethane resin P-01-0572 10/01/01 09/08/01 (S) Fatty acids, C18- unsatd., dimers, di-me esters, hydrogenated, polymers with 1,1'- methylenebis[4- isocyanatobenzene], polypropylene glycol and trimethylolpropane P-01-0576 10/16/01 10/03/01 (G) Aromatic benzaldehyde polymer P-01-0587 10/01/01 08/29/01 (S) Glycerides, tall-oil mono-, di-, and tri- P-01-0588 10/15/01 10/03/01 (G) Rosin, maleated, metal oxide salts. P-01-0597 09/24/01 09/10/01 (G) Acrylate and urethane modified polyester resin P-01-0604 10/15/01 10/05/01 (G) Diketo pyrrolo pyrrol isomers P-01-0615 09/25/01 09/12/01 (G) Acrylic polymer P-01-0617 10/09/01 09/28/01 (S) Hexadecene, polymer with pentadecene, hydrogenated* P-01-0618 10/09/01 09/28/01 (S) Tetradecene, homopolymer, hydrogenated* P-01-0635 09/17/01 09/07/01 (G) Polyurethane resin P-01-0638 10/16/01 10/04/01 (G) (monosubstituted naphthalene azo)tri substituted naphthalene sulfonic acid, salt P-01-0645 10/03/01 09/15/01 (G) Isoprene based polymer P-01-0647 09/27/01 09/25/01 (G) Substituted arylcarboxamide P-01-0651 10/09/01 09/23/01 (G) Polyester acrylate P-01-0652 10/10/01 09/22/01 (G) Plant extract P-01-0660 09/26/01 09/20/01 (G) Alkylated aromatic P-01-0665 10/17/01 10/01/01 (G) Benzenesulfonic acid, 2,2'-(1,2- ethenediyl)bis[5-[[4- substituted-6-substituted- 1,3,5-triazin-2-yl]amino- , sodium salt, compound with (substituted)oxirane polymer with sorbitol, (substituted)amine and (substituted)triol formate (salt) P-01-0671 10/10/01 09/28/01 (G) Polyalkoxylated aromatic chromophore P-01-0673 10/15/01 10/05/01 (G) Polyalkoxylated intermediate P-01-0675 10/10/01 09/20/01 (G) Polyalkoxylated aromatic chromophore P-01-0679 10/04/01 09/21/01 (G) Polyalkoxylated intermediate P-01-0681 10/12/01 09/24/01 (G) Polyalkoxylated intermediate P-01-0699 10/15/01 10/01/01 (G) Alkene adduct, calcium phenate, sulfurized P-94-0943 09/28/01 09/21/01 (G) Alkyl - aminophenol P-97-0492 10/09/01 09/26/01 (G) Acrylic polymer P-97-0579 09/21/01 09/06/01 (S) Benzene, 1,2- bis(phenoxymethyl) P-97-0736 10/02/01 09/25/01 (G) Fatty acids, C18- unsatd., dimers, polymers with ethylenediamine and a fatty alcohol. P-98-0494 10/09/01 09/28/01 (G) Polyurethane polymer P-98-1257 09/19/01 09/13/01 (G) Blocked aromatic isocyanate P-99-0214 09/18/01 09/07/01 (G) Hydrofluorocarbon (hfc) P-99-0444 09/18/01 07/27/01 (G) Urethane modified alcohol P-99-0957 10/02/01 09/17/01 (G) Chromophore substituted polyoxyalkylene ---------------------------------------------------------------------------------------------------------------- [[Page 63544]] List of Subjects Environmental protection, Chemicals, Premanufacturer notices. Dated: November 28, 2001. Deborah A. Williams, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 01-30370 Filed 12-6-01; 8:45 m] BILLING CODE 6560-50-S