![[logo] US EPA](http://www.epa.gov/epafiles/images/logo_epaseal.gif){kind=logo}
Certain New Chemicals; Receipt and Status Information
Note: EPA no longer updates this information, but it may be useful as a reference or resource.
[Federal Register: January 30, 2003 (Volume 68, Number 20)] [Notices] [Page 4777-4782] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr30ja03-65] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [OPPT-2003-0001; FRL-7288-2] Certain New Chemicals; Receipt and Status Information AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from December 11, 2002 to December 26, 2002, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. DATES: Comments identified by the docket ID number OPPT- 2003-0001 and the specific PMN number or TME number, must be received on or before March 3, 2003. ADDRESSES: Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION. FOR FURTHER INFORMATION CONTACT: Barbara Cunningham, Acting Director, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov. SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT. B. How Can I Get Copies of This Document and Other Related Information? 1. Docket. EPA has established an official public docket for this action under docket identification (ID) number OPPT-2003-0001. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is (202) 566-1744 and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is (202) 566- 0280. 2. Electronic access. You may access this Federal Register document electronically through the EPA Internet under the ``Federal Register'' listings at http://www.epa.gov/fedrgstr/. An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select ``search,'' then key in the appropriate docket ID number. Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in [[Page 4778]] printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket. For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket. Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff. C. How and To Whom Do I Submit Comments? You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked ``late.'' EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute. 1. Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/ edocket, and follow the online instructions for submitting comments. Once in the system, select`` search,'' and then key in docket ID number OPPT-2003-0001. The system is an`` anonymous access'' system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment. ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov, Attention: Docket ID Number OPPT-2003-0001 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an ``anonymous access'' system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e- mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption. 2. By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460- 0001. 3. By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Building Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-2003-0001 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. D. How Should I Submit CBI To the Agency? Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT. E. What Should I Consider as I Prepare My Comments for EPA? You may find the following suggestions helpful for preparing your comments: 1. Explain your views as clearly as possible. 2. Describe any assumptions that you used. 3. Provide copies of any technical information and/or data you used that support your views. [[Page 4779]] 4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide. 5. Provide specific examples to illustrate your concerns. 6. Offer alternative ways to improve the notice or collection activity. 7. Make sure to submit your comments by the deadline in this document. 8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation. II. Why is EPA Taking this Action? Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from December 11, 2002 to December 26, 2002, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. Receipt and Status Report for PMNs This status report identifies the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non- CBI information that may be available. In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity. I. 59 Premanufacture Notices Received From: 12/11/02 to 12/26/02 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- P-03-0170 12/12/02 03/12/03 CBI (G) Resin coating (G) Methacrylated polyol P-03-0171 12/12/02 03/12/03 CBI (G) Polymer for (G) Epoxy-acrylic waterborne paints graft copolymer P-03-0172 12/12/02 03/12/03 CBI (G) Radiation cured (G) Polyester inks acrylate P-03-0173 12/12/02 03/12/03 CBI (G) 1st substance, (G) Modified generic name = polycarbocycles, polymer resin maleated intermediate. P-03-0174 12/12/02 03/12/03 CBI (G) 2nd and 3rd (G) Modified substances, generic polycarbocycles, names = surfactant maleated, resin polymers. ethoxylated P-03-0175 12/12/02 03/12/03 CBI (G) 2nd and 3rd (G) Modified substances, generic polycarbocycles, names = surfactant maleated, resin polymers. ethoxylated, phosphates P-03-0176 12/12/02 03/12/03 CBI (G) Resin coating (G) Urethane acrylate P-03-0177 12/12/02 03/12/03 CBI (G) Concrete additive (G) Substituted hydroxyethylcellulos e ethers P-03-0178 12/12/02 03/12/03 CBI (G) Textile colorant (G) Substituted pyridinemethanesulfo nic acid, [[[(sulfooxy)ethyl]s ulfonyl]phenyl] [sulfophenyl], sodium salt P-03-0180 12/13/02 03/13/03 Mitsui Chemicals (S) Reagents for (S) Cytidine, 2'- America, Inc. nucleic acid testing deoxy-, (on subject monohydrochloride resulting from farm animals, crops, plants, foods, living entities other than humans) P-03-0181 12/13/02 03/13/03 CBI (S) Wood floor (G) Amino resin coating; wood modified polyether moulding coating; polyurethane wood furniture coating P-03-0182 12/13/02 03/13/03 CBI (G) Open, non- (G) Polysulfonated dispersive (resin) dpo/diphone P-03-0183 12/13/02 03/13/03 CBI (G) Parts of (G) Methyl styrene automobile acrylonitrile copolymer P-03-0184 12/13/02 03/13/03 CBI (G) Parts of (G) Methyl styrene automobile acrylonitrile copolymer P-03-0185 12/13/02 03/13/03 CBI (G) 1. Inner parts of (G) Butadiene styrene automobile; 2. Air polymer spoiler of automobile P-03-0186 12/16/02 03/16/03 CBI (G) Lubricant (G) Fatty acid amide additive. P-03-0187 12/16/02 03/16/03 CBI (G) Polymer catalyst (G) Organometallic (contained use) compound P-03-0188 12/17/02 03/17/03 Meadwestvaco (S) Asphalt (G) Fatty acids, tall- Corporation - emulsifier oil, reaction Specialty Chemicals products with Division substituted ethyleneamines P-03-0192 12/13/02 03/13/03 CBI (G) Surfactant (G) Mixed alkyl phosphate ester P-03-0193 12/13/02 03/13/03 CBI (G) Surfactant (G) Mixed alkyl phosphate ester, potassium salt P-03-0194 12/17/02 03/17/03 Vantico Corp. (S) Resin for (G) Bis[phenyl, 2h- electronic 1,3-benzoxazine] laminates; adhesive derivative resin; encapsulants resin; composites resin [[Page 4780]] P-03-0195 12/17/02 03/17/03 Arteva Specialties (G) Chemical (G) Aromatic acid S.A.R.L. D/B/A Kosa intermediate and ester component of structural materials, destructive uses P-03-0196 12/17/02 03/17/03 CBI (G) Additive for (G) Metallic diol coatings, inks, adhesives and composites. P-03-0197 12/18/02 03/18/03 Marubeni Specialty (G) Surface active (G) Polyoxyethylene Chemicals, Inc. agent for emulsion polyalkylarylphenyle polymerization ther sulfate ammonium salt P-03-0198 12/18/02 03/18/03 CBI (S) Site limited (G) Fatty acid amide intermediate P-03-0199 12/19/02 03/19/03 CBI (G) Resin coating (G) Polyurethane P-03-0200 12/18/02 03/18/03 CBI (G) Sealant (S) 2-propenoic acid, 2-methyl-, C9-11- isoalkyl esters, C10- rich P-03-0201 12/18/02 03/18/03 CBI (G) Oil well additive (G) Fatty acid amide ammonium chloride salts P-03-0202 12/18/02 03/18/03 Reichhold, Inc. (G) Coating (G) Alkanediol homopolymer, polymer with polyether polyol and isocyanate. P-03-0203 12/18/02 03/18/03 Reichhold, Inc. (G) Coating (G) Alkanediol homopolymer, polymer with polyether polyol and isocyanate. P-03-0204 12/18/02 03/18/03 Reichhold, Inc. (G) Coating (G) Alkanediol homopolymer, polymer with polyether polyol and isocyanate. P-03-0205 12/19/02 03/19/03 Meadwestvaco (S) Asphalt (G) Fatty acids, tall- Corporation - emulsifier salt oil, reaction Specialty Chemicals products with Division substituted ethyleneamines, hydrochlorides P-03-0206 12/19/02 03/19/03 Meadwestvaco (S) Asphalt (G) Fatty acids, tall- Corporation - emulsifier salt oil, reaction Specialty Chemicals products with Division substituted ethylenamines, acetates P-03-0207 12/19/02 03/19/03 Meadwestvaco (S) Asphalt (G) Fatty acids, tall- Corporation - emulsifier salt oil, reaction Specialty Chemicals products with Division substituted ethylenamines, phosphates P-03-0208 12/19/02 03/19/03 CBI (S) Additive in (G) Urethane acylate radiation cured coatings; additive in radiation cured inks; additive in unsaturated polyester composites; addtive in radiation cured adhesives P-03-0209 12/19/02 03/19/03 CBI (G) Chemical (G) Polyester polyol intermediate P-03-0210 12/19/02 03/19/03 Solutia Inc (S) Wetting agent for (G) Urethane modified industrial coatings acrylic copolymer P-03-0211 12/20/02 03/20/03 Powdertech (S) Coating resin of (S) Siloxanes and International carrier particles silicones,methyl Corporation for contrlling methoxy,polymers surface resistance with methyl of the particles for silsesquioxanes electrophotographic methoxy developer teiminated,reaction products with methyl ethyl ketone 0,0',0''- (methylsilylidyne)tr ioxime and 2,4,6- trimethyl-2,4,6- tris(3,3,3- trifluoropropyl)cycl otrisiloxane P-03-0212 12/20/02 03/20/03 Cognis Corporation (S) Phase transfer (S) Quaternary catalyst ammonium compounds, tri-8-10- alkylmethyl, sulfates (1:1) P-03-0213 12/20/02 03/20/03 CBI (G) Additive (G) Modified polythioaminoketone P-03-0214 12/20/02 03/20/03 CBI (G) Laminating (G) Polyurethane adhesive; open, non- prepolymer; dispersive use polurethane hot melt P-03-0215 12/23/02 03/23/03 Mcp Metalspecialties, (G) catalyst (S) 4h-1,3,2- Inc. benzodioxabismin-4- one, 2-hydroxy- P-03-0216 12/23/02 03/23/03 CBI (G) Rheology modifier (G) Acrylic copolymer P-03-0217 12/23/02 03/23/03 CBI (G) Chemical (G) Polyester polyol intermediate P-03-0218 12/23/02 03/23/03 CBI (G) Petroleum (G) Alkyl borate additive P-03-0219 12/24/02 03/24/03 Solutia Inc (S) Wetting agent for (G) Urethane modified industrial coatings acrylic copolymer P-03-0220 12/24/02 03/24/03 CBI (G) Monomer for (G) Polycarbonate polymer polyol P-03-0221 12/24/02 03/24/03 CIBA Specialty (S) Exhaust dyeing of (G) Substituted Chemicals polyester fibers isothiazole Corporation, Textile benzenamide derative Effects P-03-0222 12/26/02 03/26/03 CBI (G) Surface treatment (G) Substituted chemical phenolic resin P-03-0223 12/26/02 03/26/03 CBI (G) Surface treatment (G) Substituted chemical phenolic resin P-03-0224 12/26/02 03/26/03 CBI (G) Surface treatment (G) Substituted chemical phenolic resin P-03-0225 12/26/02 03/26/03 CBI (G) Surface treatment (G) Substituted chemical phenolic resin [[Page 4781]] P-03-0226 12/26/02 03/26/03 CBI (G) Surface treatment (G) Substituted chemical phenolic resin P-03-0227 12/26/02 03/26/03 CBI (G) Surface treatment (G) Substituted chemical phenolic resin P-03-0237 12/24/02 03/24/03 CBI (G) Adhesives (G) Polyurethane acrylate included polyester bone P-03-0238 12/24/02 03/24/03 CBI (G) Adhesives (G) Acrylate of hydroxyimide P-03-0243 12/24/02 03/24/03 CBI (G) Polyurethane (G) Polyol P-03-0244 12/24/02 03/24/03 CBI (G) Polyurethane (G) Polyol P-03-0245 12/24/02 03/24/03 CBI (G) Polyurethane (G) Polyol -------------------------------------------------------------------------------------------------------------------------------------------------------- In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received: II. 40 Notices of Commencement From: 12/11/02 to 12/26/02 ---------------------------------------------------------------------------------------------------------------- Commencement/Import Case No. Received Date Date Chemical ---------------------------------------------------------------------------------------------------------------- P-00-0310 12/26/02 12/06/02 (G) Acrylic polyester resin P-00-0328 12/26/02 11/18/02 (G) Maleic anhydride polyester P-01-0166 12/26/02 12/17/02 (S) 5-hexen-1-ol P-01-0208 12/24/02 12/12/02 (G) Polyester polycarbamate P-01-0212 12/24/02 12/11/02 (G) Polyester polycarbamate P-01-0774 12/20/02 11/22/02 (G) Unsaturated epoxy acrylate resin P-02-0172 12/26/02 12/02/02 (G) Aromatic polyester polyol P-02-0320 12/26/02 12/12/02 (G) Polymer of phenol and substituted benzenes P-02-0328 12/19/02 11/26/02 (G) Acrylate copolymer P-02-0374 12/24/02 12/11/02 (G) Chlorinated polyester P-02-0495 12/18/02 12/10/02 (G) Branched alkyl ester P-02-0551 12/19/02 11/25/02 (G) 1,5(naphthalenedisulfonic acid, substituted sulfopheny)azo)-1- naphthalenyl)amino)- substituted- piperazinyl)substituted naphthalenyl)azo)-, sodium salt P-02-0668 12/19/02 12/06/02 (S) Siloxanes and silicones, di-me, polymers with ph silsesquioxanes, hydrolyzed, reaction products with trimethoxy[3- (oxiranylmethoxy)propyl]s ilane P-02-0670 12/11/02 11/14/02 (S) Titanium, chlorotris(2- propanolato)- P-02-0707 12/11/02 12/02/02 (G) Camphorsulfonate P-02-0746 12/11/02 11/12/02 (G) Aromatic - aliphatic polyamide P-02-0808 12/19/02 11/08/02 (G) Amine salt of iscyanate, polymer with polyester, vegetable oils, alkyleneamines, hydroxy substituted carboxylic acid and tetra hydroxy alkane P-02-0821 12/20/02 12/15/02 (G) Polymer of (alkylene ether)glycol, methylene bis [isocyanatobenzene] and toluene diisocyanate P-02-0841 12/11/02 11/01/02 (G) Brominated epoxy resin P-02-0844 12/19/02 12/02/02 (G) Hydroxyfunctional acrylic copolymer P-02-0864 12/19/02 11/18/02 (G) Fluoropolymeric sulfonic acid P-02-0865 12/19/02 11/22/02 (G) Perfluoro alkoxy acid fluoride derivative P-02-0870 12/19/02 11/17/02 (G) Perfluorinated difunctional acid fluoride P-02-0876 12/23/02 12/15/02 (G) Pyridone P-02-0886 12/11/02 12/09/02 (G) Imidazoline derivative, reaction products with polybasic acid P-02-0888 12/20/02 12/12/02 (G) Ammonium amps homopolymer P-02-0898 12/17/02 12/01/02 (G) Ester of acid modified hydrocarbon resin P-02-0911 12/11/02 12/02/02 (G) Aromatic compound P-02-0918 12/19/02 12/06/02 (G) Vegetable fatty acids, polymer with cyclic carboxylic acid and tetra hydroxy alkane. P-02-0921 12/19/02 12/13/02 (G) Aliphatic polyester- polyether polyurethane P-02-0929 12/23/02 11/26/02 (G) Disubstituted-phenyl- alkyl-heteromonocycle P-02-0975 12/17/02 12/10/02 (G) Polyester resin P-02-0979 12/19/02 12/11/02 (G) Epoxy modified polyvinyl butyral P-02-0985 12/19/02 12/14/02 (G) Vegetable fatty acids, polymer with peroxide, alkyl acrylate, cyclic carboxlic acid, alkeneioc acid, tetra hydroxy alkane and alkenylbenzene. P-02-0986 12/19/02 12/11/02 (G) Vegetable fatty acids, polymer with peroxide, alkyl acrylate, alkeneoic acid and alkenylbenzene. P-02-0995 12/20/02 12/19/02 (G) Aminonitrile P-02-1053 12/16/02 12/05/02 (G) Substituted acrylate polymer P-96-1309 12/23/02 09/28/96 (G) 2-propenoic acid, half ester with fatty acid anhycloride P-96-1619 12/17/02 12/13/02 (G) N,N,'-bis(fatty alkyl) -aromatic-di-urea P-96-1620 12/17/02 12/13/02 (G) N,N,'-bis(fatty alkyl) -aromatic-di-urea ---------------------------------------------------------------------------------------------------------------- [[Page 4782]] List of Subjects Environmental protection, Chemicals, Premanufacturer notices. Dated: January 23, 2003. Sandra R. Wilkins, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 03-2170 Filed 1-29-03; 8:45 am] BILLING CODE 6560-50-S