![[logo] US EPA](http://www.epa.gov/epafiles/images/logo_epaseal.gif){kind=logo}
Certain New Chemicals; Receipt and Status Information
Note: EPA no longer updates this information, but it may be useful as a reference or resource.
[Federal Register: April 27, 2004 (Volume 69, Number 81)] [Notices] [Page 22792-22797] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr27ap04-58] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [OPPT-2004-0091]; FRL-7357-2] Certain New Chemicals; Receipt and Status Information AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSC, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing [[Page 22793]] exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from March 19, 2004 to April 8, 2004, consists of the PMNs and TMEs both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. DATES: Comments identified by the docket ID number OPPT-2004-0091 and the specific PMN number or TME number, must be received on or before May 27, 2004. ADDRESSES: Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION. FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov. SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT. B. How Can I Get Copies of this Document and Other Related Information? 1. Docket. EPA has established an official public docket for this action under docket identification (ID) number OPPT-2004-0091. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is (202) 566-1744 and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is (202) 566-0280. 2. Electronic access. You may access this Federal Register document electronically through the EPA Internet under the ``Federal Register'' listings at http://www.epa.gov/fedrgstr/. An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select ``search,'' then key in the appropriate docket ID number. Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket. For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket. Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff. C. How and To Whom Do I Submit Comments? You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked ``late.'' EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute. 1. Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, [[Page 22794]] and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/ edocket/, and follow the online instructions for submitting comments. Once in the system, select ``search,'' and then key in docket ID number OPPT-2004-0091. The system is an ``anonymous access'' system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment. ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov, Attention: Docket ID Number OPPT-2004-0091 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an ``anonymous access'' system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e- mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption. 2. By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001. 3. By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-2004-0091 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. D. How Should I Submit CBI to the Agency? Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT. E. What Should I Consider as I Prepare My Comments for EPA? You may find the following suggestions helpful for preparing your comments: 1. Explain your views as clearly as possible. 2. Describe any assumptions that you used. 3. Provide copies of any technical information and/or data you used that support your views. 4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide. 5. Provide specific examples to illustrate your concerns. 6. Offer alternative ways to improve the notice or collection activity. 7. Make sure to submit your comments by the deadline in this document. 8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation. II. Why is EPA Taking this Action? Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from March 19, 2004 to April 8, 2004, consists of the PMNs and TMEs both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. Receipt and Status Report for PMNs and TMEs This status report identifies the PMNs and TMEs both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available. In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity. I. 54 Premanufacture Notices Received From: 03/19/04 to 04/08/04 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- P-04-0457 03/19/04 06/16/04 CBI (G) Viscosity index (G) Alkyl and low temperature methacrylate fluidity improver copolymer [[Page 22795]] P-04-0458 03/23/04 06/20/04 CBI (G) Additive, open, (G) Salt of acidic non-dispersive use and basic polymers P-04-0459 03/23/04 06/20/04 CBI (G) Paper additive (G) Polymeric carboxylic acid salt P-04-0460 03/23/04 06/20/04 CBI (G) Paper additive (G) Polymeric carboxylic acid salt P-04-0461 03/24/04 06/21/04 International Paint, (G) Coating component (G) Polyamine-epoxy Inc. adduct P-04-0462 03/24/04 06/21/04 Ashland Inc., (G) Roofing adhesive (G) Polyurethane Environmental Health for bonding roof prepolymer and Safety membranes (such as pvc, tpo) to subtrates (such as insulation boards or concrete surfaces) P-04-0463 03/24/04 06/21/04 Wsp Chemicals and (S) Oil-field down (S) 2-propenoic acid, Technology LLC hole applications 2-methyl-, 2- (dimethylamino)ethyl ester, homopolymer, Compound with 1- bromohexadecane* P-04-0464 03/24/04 06/21/04 CBI (S) Used as a (G) 2-propenoic acid, viscosity modifier/ dimers and compounds flow enhancer for crude oil; used in boiler fuels as a burn promoter and for fuel value P-04-0465 03/24/04 06/21/04 Optima Chemical (G) Enhances fiber (S) 1,3- Group, LLC benzenedimethanamine , n,n'-[1,3- phenylenebis[(1- methylethylidene)imi nocarbonyloxy]]bis[2 ,4-dichloro-n-[(2,4- dichlorophenyl)methy l]-* P-04-0466 03/25/04 06/22/04 CBI (G) Acrylic pressure (G) Acrylic solution sensitive adhesive polymer P-04-0467 03/25/04 06/22/04 CBI (S) Retention agent (G) Alkanedioic acid, in paper and polymer with amino- paperboard alkanes production P-04-0468 03/25/04 06/22/04 CBI (G) Additive, open, (G) Salt of acidic non-dispersive use and basic polymers P-04-0469 03/26/04 06/23/04 CBI (G) Asphalt additive (G) Aliphatic n- substituted carboxylic acid amid P-04-0470 03/26/04 06/23/04 CBI (G) Radiation cured (G) Acrylate esters coatings, inks and adhesives. P-04-0471 03/26/04 06/23/04 CBI (G) Polymer for (G) Modified waterborne paints polyester resin P-04-0472 03/26/04 06/23/04 CBI (G) Polymer for water- (G) Modified borne paints polyester resin P-04-0473 03/29/04 06/26/04 CBI (S) Floculating (G) Quaternary agent, textile ammonium compound finishings and paper production P-04-0474 03/29/04 06/26/04 CBI (G) Intermediate for (G) Alkylbenzene lubrication sulfonic acid detergents P-04-0475 03/30/04 06/27/04 CBI (G) Additive for (G) Alkyl lubricants methacrylate copolymer P-04-0476 03/29/04 06/26/04 The Lubrizol (G) Lubricant (G) Alkylbenzene Corporation additive sulfonic acids, metal salts P-04-0477 03/29/04 06/26/04 The Lubrizol (G) Lubricant (G) Alkylbenzene Corporation additive sulfonic acids, metal salt P-04-0478 03/29/04 06/26/04 The Lubrizol (G) Lubricant (G) Alkylbenzene Corporation additive sulfonic acids, metal salt P-04-0479 03/31/04 06/28/04 CBI (G) Cleaning agent (G) Mixture containing alcohols, aminoalcohols and their sodium salts P-04-0480 03/30/04 06/27/04 The Dow Chemical (S) Brominated epoxy (G) Brominated epoxy Company resin additive resin additive P-04-0481 03/30/04 06/27/04 The Dow Chemical (S) Brominated epoxy (G) Brominated epoxy Company resin additive resin additive P-04-0482 04/05/04 07/03/04 Degussa Corporation (S) Crosslinking (G) Alkanediol/alkane agent for systems oxime/alkane amine used in the textile blocked cyclo industry aliphatic isocyanate, compounds with aliphatic acid P-04-0483 04/05/04 07/03/04 Wacker Polymer (S) Superplasticizer (G) Functionalized Systems for self-leveling poly(meth)acrylic flooring compounds acid and screeds P-04-0484 04/05/04 07/03/04 CBI (G) An open non- (G) Rosin modified dispersive use phenolic resin P-04-0485 04/05/04 07/03/04 CBI (S) Resin for (G) Acrylic polymer automotive coatings P-04-0486 04/05/04 07/03/04 CBI (S) Resin for (G) Acrylic polymer automotive coatings P-04-0487 04/05/04 07/03/04 CBI (S) Resin for (G) Acrylic polymer automotive coatings P-04-0488 04/05/04 07/03/04 CBI (S) Resin for (G) Acrylic polymer automotive coatings P-04-0489 04/05/04 07/03/04 CBI (S) Resin for (G) Acrylic polymer automotive coatings P-04-0490 04/05/04 07/03/04 CBI (S) Resin for (G) Acrylic polymer automotive coatings [[Page 22796]] P-04-0491 04/06/04 07/04/04 Cook Composites and (S) Resin for (G) 1,3- Polymers Co. fiberglass isobenzofurandione, reinforced laminates polymer with 2,5- furandione, oxybis[propanol] and 1,2-propanediol, 1(or 2)-(2- methoxymethylethoxy)- alkyl ester P-04-0492 04/05/04 07/03/04 CBI (G) Byproduct (G) Acetic acid derivative P-04-0493 04/06/04 07/04/04 Grain Processing (G) Fluid loss (G) Carboxymethyl Corporation control cornhulls P-04-0494 04/05/04 07/03/04 CBI (G) Pulp fiber (S) Endo-1,4-.beta.- treatment xylanase P-04-0495 04/07/04 07/05/04 CBI (G) Dyestuff (G) Direct black azo dye P-04-0496 04/07/04 07/05/04 CBI (G) Dyestuff (G) Substituted phthalocyanine dye P-04-0497 04/07/04 07/05/04 CBI (G) Open, non- (G) Silane-terminated dispersive (resin) polyurethane prepolymer resin P-04-0498 04/07/04 07/05/04 CBI (G) Dyestuff (G) Direct black azo dye P-04-0499 04/07/04 07/05/04 CBI (G) Dyestuff (G) Direct yellow azo dye P-04-0500 04/06/04 07/04/04 Ashland Inc., (G) Adhesive, (G) Multifuctional Environmental Health coating, ink acrylate oligomer and Safety resin P-04-0501 04/06/04 07/04/04 Ashland Inc., (G) Adhesive, (G) Multifuctional Environmental Health coating, ink acrylate oligomer and Safety resin P-04-0502 04/06/04 07/04/04 Ashland Inc., (G) Adhesive, (G) Multifuctional Environmental Health coating, ink acrylate oligomer and Safety resin P-04-0503 04/06/04 07/04/04 Ashland Inc., (G) Adhesive, (G) Multifuctional Environmental Health coating, ink acrylate oligomer and Safety resin P-04-0504 04/06/04 07/04/04 Ashland Inc., (G) Adhesive, (G) Multifuctional Environmental Health coating, ink acrylate oligomer and Safety resin P-04-0505 04/06/04 07/04/04 Ashland Inc., (G) Adhesive, (G) Multifuctional Environmental Health coating, ink acrylate oligomer and Safety resin P-04-0506 04/07/04 07/05/04 CBI (G) Grease thickener (G) Polyurea thickener P-04-0507 04/07/04 07/05/04 CBI (G) Dyestuff (G) Acid red quinone dye P-04-0508 04/07/04 07/05/04 Lg Chemical of (S) Plasticizer for (S) Hexanoic acid, 2- America, Inc. use in products ethyl-, mixed manufactured from triesters with polyvinyl chloride benzoic acid and (pvc) trimethylolpropane P-04-0509 04/07/04 07/05/04 Lg Chemical of (S) Plasticizer for (S) Hexanoic acid, 2- America, Inc. use in products ethyl-, mixed manufactured from diesters with polyvinyl chloride benzoic acid and (pvc) neopentyl glycol P-04-0510 04/07/04 07/05/04 Lg Chemical of (S) Plasticizer for (S) Hexanoic acid, 2- America, Inc. use in products ethyl-, mixed manufactured from diesters with polyvinyl chloride benzoic acid and (pvc) diethylene glycol -------------------------------------------------------------------------------------------------------------------------------------------------------- In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received: II. 1 Test Marketing Exemption Notices Received From: 03/19/04 to 04/08/04 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- T-04-0004 04/06/04 05/20/04 Ethox Chemicals, LLC (G) Cleaning fluid (S) Hexanoic acid, 2- ethyl-, C8 12-alkyl esters -------------------------------------------------------------------------------------------------------------------------------------------------------- In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received: [[Page 22797]] III. 43 Notices of Commencement From: 03/19/04 to 04/08/04 ---------------------------------------------------------------------------------------------------------------- Commencement Notice Case No. Received Date End Date Chemical ---------------------------------------------------------------------------------------------------------------- P-03-0002 03/24/04 09/23/03 (G) Trichoderma reesei P-00-0394 03/30/04 03/19/04 (G) Acrylic emulsion polymer P-01-0466 04/05/04 03/20/04 (G) Organic transition metal complex P-01-0944 03/19/04 03/08/04 (G) Benzenesulfonic acid derivative, salt P-02-0802 03/30/04 03/25/04 (G) Styrene acrylic emulsion polymer P-02-0891 03/23/04 03/17/04 (S) Phosphonium, triphenyl(phenylmethyl)-, salt with 1,1,2,2,3,3,4,4,4- nonafluoro-nu-methyl-1- butanesulfonamide (1:1) P-03-0103 03/29/04 03/08/04 (G) Pentaerythritol and dipentaerythritol mixed esters of branched and linear fatty acids P-03-0305 03/24/04 02/24/04 (G) 2-naphthalesulfonic acid, acetylamino phenyl azo, sulfo-1-naphthalenyl azo, diamino-5-sulfopheny azo, acid P-03-0330 03/25/04 01/30/04 (G) Polyurethane prepolymer, polyurethane adhesive P-03-0348 03/30/04 03/10/04 (G) Condensation polymer of anhydride and polyol. P-03-0349 03/30/04 03/10/04 (G) Condensation polymer of anhydride and polyol. P-03-0350 03/30/04 03/10/04 (G) Condensation polymer of anhydride and polyol. P-03-0351 03/30/04 03/10/04 (G) Condensation polymer of anhydride and polyol. P-03-0352 03/30/04 03/10/04 (G) Condensation polymer of anhydride and polyol. P-03-0353 03/30/04 03/10/04 (G) Condensation polymer of anhydride and polyol. P-03-0461 04/02/04 03/03/04 (G) Fatty acid reaction products with alkanolamine P-03-0472 03/30/04 03/10/04 (G) Condensation polymer of anhydride and polyol. P-03-0473 03/30/04 03/10/04 (G) Condensation polymer of anhydride and polyol. P-03-0744 03/31/04 03/13/04 (G) Modified ethylene/ acrylate polymer P-03-0781 03/25/04 03/03/04 (G) Allyl ethoxylate methacrylate P-03-0784 03/25/04 03/03/04 (G) Linear silicone methacrylate P-03-0792 04/06/04 03/17/04 (S) Cyclododecane, oxidized, by-products from, acidified, oil phase P-03-0859 03/30/04 02/24/04 (G) Benzothiadiazine derivative P-03-0867 03/26/04 03/02/04 (G) Silicone quaternary salt P-03-0869 04/06/04 03/17/04 (S) Cyclododecane, oxidized, by-products from, acidified, oil phase, ethoxylated P-04-0007 03/30/04 03/23/04 (G) Modified saponified tall oil distillates P-04-0013 04/07/04 03/04/04 (G) Aromatic - aliphatic polyamides P-04-0038 03/29/04 03/10/04 (G) Acrylic polymer P-04-0040 03/26/04 02/27/04 (G) Polyethylene glycol benzyl alkyl ether P-04-0041 03/30/04 03/23/04 (G) Polymeric amine P-04-0102 03/23/04 02/25/04 (G) Aqueous ketone- aldehyde resin P-04-0105 03/24/04 03/13/04 (G) Alkyl oxirane - epichlorohydrin - alkyl bis(phenol) - polyhydroxy polyol P-04-0110 04/05/04 03/19/04 (S) Linseed oil, conjugated P-04-0121 03/25/04 03/08/04 (G) Polyurethane P-04-0127 04/05/04 03/26/04 (G) Polyether/allylphenol modified siloxane P-04-0134 04/02/04 03/25/04 (G) Reaction products of substituted amino anthracenesulfonic acid and substituted triazine amino phenyl compound P-04-0138 03/19/04 03/08/04 (G) Substituted acrylate polymer P-04-0146 03/25/04 02/27/04 (S) Potassium zinc fluoride P-04-0148 04/02/04 03/05/04 (G) Olefin - maleic anhydride esterified polymer P-04-0154 03/22/04 03/04/04 (G) 2-propenoic acid, 2- methyl-, polymer with 2- hydroxypropyl 2- propenoate, 2- propenenitrile, alkyl 2- methyl-2-propenoate and 1- propene,homopolymer, chlorinated P-04-0172 04/05/04 03/31/04 (G) Organo-manganese complex P-94-1904 03/30/04 03/22/04 (G) Aqueous acrylic polymer P-94-1929 03/30/04 02/25/04 (G) Polyamideimide resin ---------------------------------------------------------------------------------------------------------------- List of Subjects Enviromental protection, Chemicals, Premanufacturer notices. Dated: April 20, 2004. Anthony Cheatham, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 04-9563 Filed 4-26-04; 8:45 am] BILLING CODE 6560-50-S