![[logo] US EPA](http://www.epa.gov/epafiles/images/logo_epaseal.gif){kind=logo}
Certain New Chemicals; Receipt and Status Information
Note: EPA no longer updates this information, but it may be useful as a reference or resource.
[Federal Register: December 15, 2006 (Volume 71, Number 241)]
[Notices]
[Page 75541-75546]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr15de06-75]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2006-0966; FRL-8106-6
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from September 18, 2006 to October 13, 2006, consists of the
PMNs and TMEs, both pending or expired, and the notices of commencement
to manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before January 16, 2007.
ADDRESSES: Submit your comments, identified by docket identification
(ID) no. EPA-HQ-OPPT-2006-0966, by one of the following methods.
? Federal eRulemaking Portal: http://www.regulations.gov.
Follow the on-line instructions for submitting comments.
? Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
? Hand Delivery: OPPT Document Control Office (DCO, EPA East
Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID number EPA-HQ-OPPT-2006-[insert Docket ID no.].
The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding
legal holidays. The telephone number for the DCO is (202) 564-8930.
Such deliveries are only accepted during the Docket's normal hours of
operation, and special arrangements should be made for deliveries of
boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2006-0966;. EPA's policy is that all comments received will be included
in the public docket without change and may be made available online at
http://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' systems,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov your
e-mail address will be automatically captured and included as part of
the comment that is placed in the public docket and made available on
the Internet. If you submit an electronic comment, EPA recommends that
you include your name and other contact information in the body of your
comment and with any disk or CD ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses.
Docket: All documents in the docket are listed in the
regulations.gov index. Although listed in the index, some information
is not publicly available, e.g., CBI or other information whose
disclosure is restricted by statute. Certain other material, such as
copyrighted material, will be publicly available only in hard copy.
Publicly available docket materials are available electronically at
http://www.regulations.gov, or, if only available in hard copy, at the
OPPT Docket, EPA Docket Center (EPA/DC). The EPA/DC suffered structural
damage due to flooding in June 2006. Although the EPA/DC is continuing
operations, there will be temporary changes to the EPA/DC during the
clean-up. The EPA/DC Public Reading Room, which was temporarily closed
due to flooding, has been relocated in the EPA Headquarters Library,
Infoterra Room (Room Number 3334) in the EPA West Building, located at
1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading
Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday,
excluding legal holidays. The telephone number of the EPA/DC Public
Reading Room is (202) 566-1744, and the telephone number for the OPPT
Docket is (202) 566-0280. EPA visitors are required to show
photographic identification and sign the EPA visitor log. Visitors to
the EPA/DC Public Reading Room will be provided with an EPA/DC badge
that must be visible at all times while in the EPA Building and
returned to the guard upon departure. In addition, security personnel
will escort visitors to and from the new EPA/DC Public Reading Room
location. Up-to-date information about the EPA/DC is on the EPA web
site at http://www.epa.gov/epahome/dockets.htm.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
[[Page 75542]]
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as
CBI and then identify electronically within the disk or CD ROM the
specific information that is claimed CBI). In addition to one complete
version of the comment that includes information claimed as CBI, a copy
of the comment that does not contain the information claimed as CBI
must be submitted for inclusion in the public docket. Information so
marked will not be disclosed except in accordance with procedures set
forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions - The agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at the estimate.
vi. Provide specific examples to illustrate your concerns, and
suggested alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from September 18, 2006 to October 13,
2006, consists of the PMNs and TMEs, both pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 75 Premanufacture Notices Received From: 09/18/06 to 10/13/06
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-06-0805 09/18/06 12/16/06 Cytec Industries Inc. (G) Mining chemical (G) Modified
reagent thiocarbamate
P-06-0806 09/18/06 12/16/06 Clearwater (S) Flow enhancer and (G) Phosphate ester
International LLC d/ fines migration alkyl pyridine salt
b/a Weatherford reduction of post
Engineered Chemistry slick water jobs
(enhanced oil
recovery); flow
enhancer and fines
migration reduction
of post fracturing
jobs (enhanced oil
recovery); formation
treatment of post
stimulation jobs
(enhanced oil
recovery)
P-06-0807 09/19/06 12/17/06 CBI (G) Textile colorant (G) Substituted
phenylazo
naphthalenesulfonic
acid
P-06-0808 09/18/06 12/16/06 Xerox Corporation (G) Open, non- (G) Polyamide resin
dispersive use as a
constituent in
solid, crayon like
inks for computer
printers
P-06-0809 09/20/06 12/18/06 CBI (G) Radiation cured (G) Amine modified
coating acrylic ester
P-06-0810 09/20/06 12/18/06 Nation Ford Chemical (S) Destructive use (S) 2,5-
Company as chemical cyclohexadiene-1,4-
intermediate dione, 2,5-dichloro-
3,6-bis[(9-ethyl-9h-
carbazol-3-yl)amino]-
P-06-0811 09/20/06 12/18/06 CBI (S) Monomer for the (G) Substituted
synthesis of bicyclic olefin
specialty polymer
P-06-0812 09/20/06 12/18/06 CBI (G) Surface treatment (G) Fluoropolyether
agent derivative
fluoronated
polyurethane resin
P-06-0813 09/19/06 12/17/06 CBI (G) Additive for (G) Poly
pigment dispersion (oxyalkanediyl)
,.alpha.,.alpha,'-
carbomonocycledicarb
onyl bis (.omega.-
alkyloxy-)
P-06-0814 09/19/06 12/17/06 CBI (G) Additive for (G) Poly
pigment dispersion (oxyalkanediyl) ,
.alpha.,.alpha,'.alp
ha.''-
carbomonocycletricar
bonyl tris (.omega.-
alkyloxy-)
[[Page 75543]]
P-06-0815 09/19/06 12/17/06 Nyco Minerals, Inc. (S) Filter for (S) 1,2-
thermoplastic resins ethanediamine, N-[3-
(trimethoxysilyl)pro
pyl]-, hydrolysis
products with
wollastonite
(ca(si03))
P-06-0816 09/21/06 12/19/06 CBI (G) Hydrophobic (G) Modified reaction
surface active agent products of alkyl
for cellulosic alcohol, halogenated
substrates and alkane, substituted
similar materials epoxide, and amino
compound
P-06-0817 09/22/06 12/20/06 CBI (S) Fluorescent (G) Substituted
brightener for use benzene sulfonic
in cellulosic paper acid, salt reaction
applications product with
phenylamine and
amino alcohol and
substituted
propaneamide
compounds with amino
alcohol
P-06-0818 09/22/06 12/20/06 CBI (G) Polymer for (G) Benzoic acid,
injection molding 2,2'-
and extrusion [substituted]bis-,
dimethyl ester,
polymer with 1,4-
benzenediol,
(substituted) 1,4-
benzenediol and 4,4'-
(1-
substituted)bis[phen
ol]
P-06-0819 09/22/06 12/20/06 CBI (G) Polymer for (G) Benzoic acid,
injection molding 2,2'-
and extrusion [substituted]bis-,
dimethyl ester,
polymer with 1,4-
benzenediol, and
4,4' (substituted)
bis[phenol]
P-06-0820 09/22/06 12/20/06 CBI (G) Contained use in (G) Trisubstituted
energy production triazine
P-06-0821 09/22/06 12/20/06 CBI (S) Reactive diluent (G) Alkoxylated
in ultra violet pentaerythritol
formulations acrylate
P-06-0822 09/22/06 12/20/06 CBI (G) Acrylic binder (G) Acrylic copolymer
P-06-0823 09/25/06 12/23/06 CBI (S) Aqueous (G) Alkanedioic acid,
dispersion of polymer with
polymer for leather alkanediol,
finishing carbocycledicarboxyl
ic acid, carbocycle-
isocyanato-
(isocyanatoalkyl)-
trialkyl-,
carbocycle
alkylenebis[isocyana
to-, alkanoic acid,
hydroxy-
(hydroxyalkyl)-alkyl-
, trialkylamine, and
1,2-alkyldiamine
P-06-0824 09/25/06 12/23/06 CBI (S) Aqueous (G) 2-propenoic acid,
dispersion of polymer with
polymer for leather cyanoalkene,
finishing alkenoic acid alkyl
ester,
alkylalkenamide,
methylolmethacrylami
de, and an alkenyl
benzene
P-06-0825 09/25/06 12/23/06 CBI (S) Aqueous (G) Oxepanone,
dispersion of polymer with dialkyl-
polymer for leather alkanediol, alkyl-
finishing (hydroxyaalkyl)-
alkanediol,
carbocycle,
isocyanato-
(isocyanatoalkyll)-
trialkyl-, alkanoic
acid, hydroxy-
(hydroxyalkyl)-alkyl-
, alkylamine, N,N-
dialkyl-, aminoalkyl-
trialkylcarbocyclica
mine, and
alkyldiamine
P-06-0826 09/25/06 12/23/06 CBI (G) Stabilizer for (G) Seed-oil based
emulsion polymers surfactant
P-06-0827 09/26/06 12/24/06 CBI (G) Fuel additive (G) Heterocycle
amine, N-
heterocycle,
monoammonium salt
P-06-0828 09/27/06 12/25/06 CBI (G) Dispersive use in (G) Polyacrylate
cooling water terpolymer salt
treatment
P-06-0829 09/27/06 12/25/06 Archer Daniels (G) Petrochemical (S) Fatty acids,
Midland Company replacement canola-oil, me
esters
P-06-0830 09/27/06 12/25/06 Archer Daniels (G) Petrochemical (S) Fatty acids, rape-
Midland Company replacement oil, me esters
P-06-0831 09/27/06 12/25/06 Archer Daniels (G) Petrochemical (S) Fatty acids, corn-
Midland Company replacement oil, me esters
P-06-0832 09/27/06 12/25/06 Archer Daniels (G) Petrochemical (S) Fatty acids, palm-
Midland Company replacement oil, me esters
P-06-0833 09/27/06 12/25/06 Archer Daniels (G) Petrochemical (S) Fatty acids,
Midland Company replacement peanut-oil, me
esters
P-06-0834 09/27/06 12/25/06 Archer Daniels (G) Petrochemical (S) Fatty acids,
Midland Company replacement linseed-oil, me
esters
P-06-0835 09/28/06 12/26/06 CBI (G) Additive, open, (G) Polyester
non-dispersive use urethane copolymer
P-06-0836 09/28/06 12/26/06 CBI (G) Additive, open, (G) Polyester
non-dispersive use urethane copolymer
[[Page 75544]]
P-06-0837 09/28/06 12/26/06 CBI (G) Additive, open, (G) Polyester
non-dispersive use urethane copolymer
P-06-0838 09/28/06 12/26/06 CBI (G) Additive, open, (G) Polyester
non-dispersive use urethane copolymer
P-06-0839 09/29/06 12/27/06 CBI (G) Flame retardants (G)
for plastics and Phenoxyphosphazene
resins oligomer
P-07-0001 10/02/06 12/30/06 Mane, USA (G) Perfumery (G) Cilandrane
ingredient
P-07-0002 10/03/06 12/31/06 CBI (G) Film forming aid (G) Fatty acids, C16-
for paint C18 and C18
formulations; film unsaturated, esters
forming aid for ink with mixed diols and
formulations triols
P-07-0003 10/03/06 12/31/06 CBI (G) Film forming aid (G) Mixed polyol -
for paint glycerol fatty acid
formulations; film ester
forming aid for ink
formulations
P-07-0004 10/03/06 12/31/06 CBI (G) Film forming aid (G) Mixed polyol -
for paint glycerol fatty acid
formulations; film ester
forming aid for ink
formulations
P-07-0005 10/03/06 12/31/06 CBI (G) Film forming aid (G) Mixed polyol -
for paint glycerol fatty acid
formulations; film ester
forming aid for ink
formulations
P-07-0006 10/03/06 12/31/06 CBI (G) Film forming aid (G) Mixed polyol -
for paint glycerol fatty acid
formulations; film ester
forming aid for ink
formulations
P-07-0007 10/03/06 12/31/06 CBI (G) Film forming aid (G) Mixed polyol -
for paint glycerol fatty acid
formulations; film ester
forming aid for ink
formulations
P-07-0008 10/02/06 12/30/06 Ashland Inc., (G) Adhesive (G) Benzene, 1,1'-
Environmental Health methylenebis[4-
and Safety isocyanato-, polymer
with oxirane, methyl-
, polymer with
oxirane, ether with
1,2-propanediol;
poly[oxy(methyl-1,2-
ethanediyl)],
.alpha.,
.alpha.',.alpha.''-
1,2,3-
propanetriyltris[.om
ega.-hydroxy-;
hexanedioic acid,
polymer with 2,2-
dimethyl-1,3-
propanediol, 2-ethyl-
2-(hydroxymethyl)-
1,3-propanediol, 1,6-
hexanediol and 2,2'-
oxybis[ethanol];
hydrocarbons, C9-
unsaturated.,
polymers and phenol;
and krasol
P-07-0009 10/04/06 01/01/07 CBI (S) Polyurethane (G) Aqueous
coating polyurethane
dispersion
P-07-0010 10/04/06 01/01/07 CBI (G) Additive, open, (G) Styrene-maleic
non-dispersive use anhydride copolymer,
reaction products
with polyether, salt
with alkanolamin
P-07-0011 10/04/06 01/01/07 CBI (G) Antioxidant (G) Alkylated phenol
P-07-0012 10/04/06 01/01/07 CBI (S) Resin for inks, (G) Ethanol capped
coatings and polyether
adhesives polyurethane
P-07-0013 10/05/06 01/02/07 CBI (G) Thermoplastic (G) Alkylphenol
resin processing aid novolak modified
for rubber with amine and epoxy
manufacture
P-07-0014 10/05/06 01/02/07 CBI (G) Radiation-curable (G) Polyester
wood, paper and polyurethane
metal coatings, such acrylate oligomer
as wood varnishes,
overprint varnishes
for paper, and metal
coatings
P-07-0015 10/05/06 01/02/07 CBI (S) Reactive dye for (G) Substituted
cellulosic fibers naphthalenedisulfoni
c acid, substituted
amino azo]-, sodium
salt (same generic
name for both
isomers)
P-07-0016 10/06/06 01/03/07 Croda Inc. (G) Fabric care (G) Hydrolyzed wheat
softening agent silicone copolymer
P-07-0017 10/06/06 01/03/07 CBI (G) Siloxane parts of (G)
this new material Aminoalkoxysiloxane,
have water repellent acetates (salts)
effect and hydroxy
or alkoxy group of
this new material
reacts with surface
of frame retardant
materials to make
water repellent
coating
P-07-0018 10/06/06 01/03/07 Ashland Inc., (G) Fiberglass (G) 1,3-propanediol,
Environmental Health reinforced boat 2,2-dimethyl-,
and Safety hulls polymer with
cycloalkyl
diisocyanate, 2,2-
bis[(2-
propenyloxy)methyl]-
1-butanol-blocked
[[Page 75545]]
P-07-0019 10/06/06 01/03/07 Ashland Inc., (G) Fiberglass (G) 1,2-ethanediol,
Environmental Health reinforced boat polymer with
and Safety hulls cycloalkyl
diisocyanate, 2,2-
bis[(2-
propenyloxy)methyl]-
1-butanol-blocked
P-07-0020 10/06/06 01/03/07 Ashland Inc., (G) Fiberglass (G) Poly(oxy-1,2-
Environmental Health reinforced boat ethanediyl), .alpha.-
and Safety hulls hydro-.omega.-
hydroxy-, polymer
with cycloalkyl
diisocyanate, 2,2'-
bis[(2-
propenyloxy)methyl]-
1-butanol-blocked
P-07-0021 10/10/06 01/07/07 CIBA Specialty (S) Flame retardant (G) Phenol, 2,4-
Chemicals for polymers bis(1,1-branched
Corporation alkyl)-, phosphate
(3:1)
P-07-0022 10/10/06 01/07/07 CBI (S) Polyurethane (G) Aqueous
coating polyurethane
dispersion
P-07-0023 10/10/06 01/07/07 CBI (S) Polyurethane (G) Aqueous
coating polyurethane
dispersion
P-07-0024 10/10/06 01/07/07 CBI (S) Emulsifier for (G) Alkylamine
oilfield application ethoxylated
P-07-0025 10/10/06 01/07/07 CBI (G) Contained use in (G) Alkyl ether
energy production trialkyl quaternary
ammonium compound
P-07-0026 10/10/06 01/07/07 CBI (G) Contained use in (G) Alkyl ether
energy production trialkyl quaternary
ammonium compound
P-07-0027 10/11/06 01/08/07 CBI (S) A component in (G) Dicarboxylic
ultraviolet -, based acid, polymer
visible light and with a
electron beam dicarboxylate, 2-
curable formulations ethyl-2-
(hydroxymethyl)-1,3-
propanediol and 2-
methyl-1,3-
propanediol, 2-
propenoate
P-07-0028 10/12/06 01/09/07 CBI (G) Open, non- (G) Diphenolmethyl
dispersive (resin) based polymer resin
P-07-0029 10/13/06 01/10/07 CBI (S) Electrodeposition (G) Amine functional
coating for metallic epoxy based resin
substrates salted with an
organic acid and
grafted with
anhydride
P-07-0030 10/13/06 01/10/07 CBI (S) Electrodeposition (G) Amine functional
coating for metallic epoxy based resin
substrates salted with an
organic acid and
grafted with
anhydride
P-07-0031 10/13/06 01/10/07 CBI (S) Electrodeposition (G) Amine functional
coating for metallic epoxy based resin
substrates salted with an
organic acid and
grafted with
anhydride
P-07-0032 10/13/06 01/10/07 CBI (S) Electrodeposition (G) Amine functional
coating for metallic epoxy based resin
substrates salted with an
organic acid and
grafted with
anhydride
P-07-0033 10/13/06 01/10/07 CBI (S) Electrodeposition (G) Amine functional
coating for metallic epoxy based resin
substrates salted with an
organic acid and
grafted with
anhydride
P-07-0034 10/13/06 01/10/07 CBI (S) Electrodeposition (G) Amine functional
coating for metallic epoxy based resin
substrates salted with an
organic acid and
grafted with
anhydride
P-07-0035 10/12/06 01/09/07 CBI (G) Polymeric binder (G) Methacrylate
copolymer
P-07-0036 10/12/06 01/09/07 CBI (G) Polymeric binder (G) Methacrylate
copolymer
P-07-0037 10/13/06 01/10/07 Piedmont Chemical (S) Binder resin for (S) 1,3-
Industries I, LLC polyester fabric benzenedicarboxylic
knit and nonwoven; acid, polymer with
binder resin for 1,4-
mattress ticking benzenedicarboxylic
polyester/ acid, 1,3-dihydro-
polypropylene knit; 1,3-dioxo-5-
binder resin for isobenzofurancarboxy
nylon strapping lic acid, dimethyl
1,4-
benzenedicarboxylate
, 1,2-ethanediol and
2,2'-
oxybis[ethanol],
ammonium salt
P-07-0038 10/13/06 01/10/07 Piedmont Chemical (S) Binder resin for (S) 1,3-
Industries I, LLC polyester fabric benzenedicarboxylic
knit and nonwoven; acid, polymer with
binder resin for 1,4-
mattress ticking benzenedicarboxylic
polyester/ acid, 1,3-dihydro-
polypropylene knit; 1,3-dioxo-5-
binder resin for isobenzofurancarboxy
nylon strapping lic acid, 2,2'-
oxybis[ethanol]
and
1,3-propanediol,
ammonium salt
P-07-0039 10/13/06 01/10/07 Piedmont Chemical (S) Binder resin for (S) 1,3-
Industries I, LLC polyester fabric benzenedicarboxylic
knit and nonwoven; acid, polymer with
binder resin for 1,4-
mattress ticking benzenedicarboxylic
polyester/ acid, 1,4-
polypropylene knit; butanediol, 1,3-
binder resin for dihydro-1,3-dioxo-5-
nylon strapping isobenzofurancarboxy
lic acid, dimethyl
1,4-
benzenedicarboxylate
and 2,2'-
oxybis[ethanol],
ammonium salt
[[Page 75546]]
P-07-0040 10/13/06 01/10/07 Piedmont Chemical (S) Binder resin for (S) 2,6-
Industries I, LLC polyester fabric naphthalenedicarboxy
knit and nonwoven; lic acid, dimethyl
binder resin for ester, polymer with
mattress ticking 1,3-
polyester/ benzenedicarboxylic
polypropylene knit; acid, 1,4-
binder resin for benzenedicarboxylic
nylon strapping acid, 1,3-dihydro-
1,3-dioxo-5-
isobenzofurancarboxy
lic acid, 1,2-
ethanediol and 2,2'-
oxybis[ethanol],
ammonium salt
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
II. 19 Notices of Commencement From: 09/18/06 to 10/13/06
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-03-0837 09/21/06 09/07/06 (G) Aliphatic
polyisocyanate
P-05-0048 09/18/06 02/28/05 (G) Phthalocyanine
compound
P-05-0484 04/07/06 03/09/06 (G) Polyoxyethylene
polyxoxypropylene
polymer, reaction with
cyclohexylmethane
diisocyanate and
polyoxyphenyl derivative
P-05-0551 04/07/06 03/09/06 (G) Polyalkylene glycol
alkyl ether, reaction
products with allyl
glycidyl ether
P-05-0694 04/07/06 03/09/06 (G) Polyalkylene glycol
aryl ether, reaction
products with
formaldehyde
P-06-0092 04/07/06 03/09/06 (G) Oxirane,methyl-,
polymer with oxirane,
fatty acid alkyl ethers
P-06-0176 09/25/06 09/05/06 (G) Acrylate ester
P-06-0196 09/26/06 08/01/06 (G) Tdi prepolymer based
on hybrid caprolactone
polyol
P-06-0200 09/21/06 09/12/06 (G) Hydroxy carboxylic
acid amide, N,N-dialkyl
derivates
P-06-0272 09/27/06 09/05/06 (G) Alkylenedicarboxylic
dichloride, polymer with
dihydroxybenzene
P-06-0288 09/27/06 09/18/06 (G) Hydroxylated diester
of a triamine
P-06-0366 09/18/06 09/08/06 (G) Isocyanate functional
polyester polyether
urethane polymer
P-06-0448 09/18/06 09/07/06 (G) Fatty acid salt of
alkyldiamine
P-06-0463 08/17/06 07/29/06 (S) Borate(1-), bis
[ethanedioato (2-)-
.kappa. 01, .kappa. 02]
-
lithium, (t-4)-
P-06-0535 09/21/06 08/22/06 (G) Ester urethane
P-06-0539 09/19/06 08/22/06 (G) Methyl propylhexanol
P-06-0543 09/19/06 08/22/06 (G) Methyl propylhexanol
P-06-0596 09/15/06 09/07/06 (S) 1h-indene,
2,3,3a,4,5,7a-hexahydro-
1,1,2,3,3-pentamethyl-6-
(2-propenyl)- 2h-
indeno[4,5-b]furan,
decahydro-2,6,6,7,8,8-
hexamethyl-
P-06-0606 09/27/06 09/13/06 (S) 1-propanamine, 3-
(triethoxysilyl)-,
reaction products with
boehmite (al(oh)o)
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: December 7, 2006.
Bernice Mudd,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. E6-21425 Filed 12-14-06; 8:45 am]
BILLING CODE 6560-50-S