![[logo] US EPA](http://www.epa.gov/epafiles/images/logo_epaseal.gif){kind=logo}
Certain New Chemicals; Receipt and Status Information
Note: EPA no longer updates this information, but it may be useful as a reference or resource.
[Federal Register: June 9, 2006 (Volume 71, Number 111)]
[Notices]
[Page 33449-33454]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr09jn06-35]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2006-0488; FRL-8071-8]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a
[[Page 33450]]
new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA
and comply with the statutory provisions pertaining to the manufacture
of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is
required to publish a notice of receipt of a premanufacture notice
(PMN) or an application for a test marketing exemption (TME), and to
publish periodic status reports on the chemicals under review and the
receipt of notices of commencement to manufacture those chemicals. This
status report, which covers the period from May 1, 2006, to May 19,
2006, consists of the PMNs, pending or expired, and the notices of
commencement to manufacture a new chemical that the Agency has received
under TSCA section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before July 10, 2006.
ADDRESSES: Submit your comments, identified by docket identification
(ID) no. EPA-HQ-OPPT-2006-0488, by one of the following methods.
? http://www.regulations.gov 
. Follow the on-line
instructions for submitting comments.
? Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
? Hand Delivery: OPPT Document Control Office (DCO, EPA East
Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID number EPA-HQ-OPPT-2006-0488. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the Docket's normal hours of operation, and
special arrangements should be made for deliveries of boxed
information.
? Instructions: Direct your comments to docket ID number
EPA-HQ-OPPT-2006-0488. EPA's policy is that all comments received will
be included in the public docket without change and may be made available
online at http://www.regulations.gov , including any personal
information provided, unless the comment includes information claimed
to be Confidential Business Information (CBI) or other information
whose disclosure is restricted by statute. Do not submit information
that you consider to be CBI or otherwise protected through
regulations.gov or e-mail. The regulations.gov website is an
``anonymous access'' systems, which means EPA will not know your
identity or contact information unless you provide it in the body of
your comment. If you send an e-mail comment directly to EPA without
going through regulations.gov your e-mail address will be automatically
captured and included as part of the comment that is placed in the
public docket and made available on the Internet. If you submit an
electronic comment, EPA recommends that you include your name and other
contact information in the body of your comment and with any disk or CD
ROM you submit. If EPA cannot read your comment due to technical
difficulties and cannot contact you for clarification, EPA may not be
able to consider your comment. Electronic files should avoid the use of
special characters, any form of encryption, and be free of any defects
or viruses.
Docket: All documents in the docket are listed in the
regulations.gov index. Although listed in the index, some information
is not publicly available, i.e., CBI or other information whose
disclosure is restricted by statute. Certain other material, such as
copyrighted material, is not placed on the Internet and will be
publicly available only in hard copy form. Publicly available docket
materials are available electronically through regulations.gov or in
hard copy at the OPPT Docket, EPA Docket Center (EPA/DC), EPA West,
Room B102, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket
Center Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal holidays. The telephone number for the
Public Reading Room is (202) 566-1744, and the telephone number for the
OPPT Docket is (202) 566-0280.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory
Coordinator, Environmental Assistance Division, Office of Pollution
Prevention and Toxics (7408M), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number:
(202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as
CBI and then identify electronically within the disk or CD ROM the
specific information that is claimed CBI). In addition to one complete
version of the comment that includes information claimed as CBI, a copy
of the comment that does not contain the information claimed as CBI
must be submitted for inclusion in the public docket. Information so
marked will not be disclosed except in accordance with procedures set
forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions - The agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at the estimate.
vi. Provide specific examples to illustrate your concerns, and
suggested alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or
[[Page 33451]]
an application for a TME and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from May 1, 2006, to May 19, 2006, consists of the PMNs pending
or expired, and the notices of commencement to manufacture a new
chemical that the Agency has received under TSCA section 5 during this
time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period. If you are
interested in information that is not included in the following tables,
you may contact EPA as described in Unit II. to access additional non-
CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical identity.
I. 71 Premanufacture Notices Received From: 05/01/06 to 05/19/06
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-06-0465 05/01/06 07/29/06 Meadwestvaco (S) Asphalt (G) Tall-oil fatty,
Corporation emulsifier salt alkylamino amides,
hydrochloride
P-06-0466 05/01/06 07/29/06 CBI (G) Construction (G) 2-propenoic acid,
materials additive 2-methyl-, methyl
ester, polymer
P-06-0467 05/01/06 07/29/06 CBI (G) Blocked (G) Open, non-
isocyanate dispersive use.
P-06-0468 05/02/06 07/30/06 CBI (S) hardener for (G) Oxirane,
architectural (chloromethyl)-,
coatings harener for polymer with .alpha.-
metal primers for hydro-.omega.-
maintenance coatings hydroxypoly[oxy(meth
yl-1,2-ethanediyl)]
and methyloxirane
polymer with oxirane
2-aminopropyl methyl
ether
P-06-0469 05/02/06 07/30/06 CBI (S) Chlorinated (G) Chlorinated
polyester resin used polyester resin
in ultra violet
curable inks and
coatings
P-06-0470 05/02/06 07/30/06 Cognis Corporation (S) Performance (S) 1-propanaminium,
additive for hard N,N,N-trimethyl-3-
surface cleaners [(2-methyl-1-oxo-
2propenyl)-,
chloride, polymer
with N-(1-
methylethyl)-2-
propenamide, 2-
methyl-2-[(1-oxo-2-
propenyl) amino]-1-
propanesulfonic
acid, and 2-
propenoic acid,
Sodium salt
P-06-0471 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0472 05/02/06 07/30/06 CBI (G) Nonwoven internal (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0473 05/02/06 07/30/06 CBI (G) Tile surface (G) Fluoroalkyl
treatment methacrylate
copolymer
P-06-0474 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0475 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0476 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0477 05/02/06 07/30/06 CBI (G) Carpet treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0478 05/02/06 07/30/06 CBI (G) Carpet treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0479 05/02/06 07/30/06 CBI (G) Carpet treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0480 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0481 05/02/06 07/30/06 CBI (G) Paper treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0482 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0483 05/02/06 07/30/06 CBI (G) Paper treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0484 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0485 05/02/06 07/30/06 CBI (G) texile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0486 05/02/06 07/30/06 CBI (G) Paper treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0487 05/02/06 07/30/06 CBI (G) monomer for (G) Fluoroalkyl
textile and paper acrylate
treatment additive
P-06-0488 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0489 05/02/06 07/30/06 CBI (G) textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
[[Page 33452]]
P-06-0490 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0491 05/02/06 07/30/06 CBI (G) textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0492 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0493 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0494 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0495 05/02/06 07/30/06 CBI (G) Carpet treatment (G) Fluorochemical
additive urethane
P-06-0496 05/02/06 07/30/06 CBI (G) Carpet treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0497 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0498 05/02/06 07/30/06 CBI (G) Carpet treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0499 05/02/06 07/30/06 CBI (G) Nonwoven internal (G) Fluoroalkyl
additive acrylate copolymer
P-06-0500 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0501 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0502 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0503 05/02/06 07/30/06 CBI (G) Textile treatment (G)
additive Fluoroalkylacrylate
copolymer
P-06-0504 05/02/06 07/30/06 CBI (G) Carpet treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0505 05/02/06 07/30/06 CBI (G) Textile treatment (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0506 05/02/06 07/30/06 CBI (G) Nonwoven internal (G) Fluoroalkyl
additive methacrylate
copolymer
P-06-0507 05/02/06 07/30/06 CBI (G) Paper treatment (G) Fluoroalkyl
additive acrylate copolymer
P-06-0508 05/02/06 07/30/06 CBI (G) Textile treatment (G)
additive Fluoroalkylacrylate
copolymer
P-06-0509 05/03/06 07/31/06 CBI (G) Solvent in fuel (G) Substituted
production; solvent alkanol
in industrial plants
P-06-0510 05/04/06 08/01/06 CBI (G) Additive, open, (G) Polyether
non-dispersive use modified
polydimethylsiloxane
P-06-0511 05/04/06 08/01/06 CBI (G) Additive, open, (G) Polyether
non-dispersive use modified
polydimethylsiloxane
P-06-0512 05/04/06 08/01/06 CBI (G) Component in (G) Polyurethane
polyurethane prepolymer with a
adhesive/sealant. polycarbonatediol
P-06-0513 05/04/06 08/01/06 CBI (G) Metal refining (S) Tantalum, fluoro
intermediate hydrogen complexes
P-06-0514 05/05/06 08/02/06 CBI (G) Chemical (G) Al, mixed metal
intermediate and alcohol complex
P-06-0515 05/08/06 08/05/06 CBI (G) Paper strength (G) Glyoxalated
additive acrylamide, dadmac,
2-
hydroxyethylacrylate
ternary copolymer
P-06-0516 05/08/06 08/05/06 CBI (G) Paper strength (G) Glyoxalated
additive branched acrylamide,
dadmac, 2-
hydroxyethylacrylate
ternary copolymer
P-06-0517 05/08/06 08/05/06 CBI (G) Catalyst (S) Neodymium,
tris[bis(2-
ethylhexyl)phosphato-
.kappa.o'',-
.kappa.o''']]-
P-06-0518 05/08/06 08/05/06 IGM Resins Inc. (G) Ultra violet (S) Idodium, bis(4-
initiator methylphenyl)-,
hexafluorophosphate(
1-)
P-06-0519 05/09/06 08/06/06 CBI (G) Pigment additive; (G) .beta.-
open, non-dispersive alanine[(substituted-
use pyrrole-
diyl)bis[(substitute
d)bis, aluminium
salt (3:2)
P-06-0520 05/09/06 08/06/06 CBI (G) Pigment additive; (G) [biphenyl]-
open, non-dispersive sulfonamide],-
use ((substituted)pyrrol
e-
diyl)bis[(substitute
d)propyl-
P-06-0521 05/08/06 08/05/06 CBI (G) Paper strength (G) Acrylamide,
additive dadmac, 2-
hydroxyethylacrylate
ternary copolymer
P-06-0522 05/08/06 08/05/06 CBI (G) Paper strength (G) Branched
additive acrylamide, dadmac,
2-
hydroxyethylacrylate
ternary copolymer
[[Page 33453]]
P-06-0523 05/09/06 08/06/06 CBI (G) Prepolymer of (G) Aromatic
polyester urethane saturated
copolyester
P-06-0524 05/15/06 08/12/06 Huntsman Corporation (S) Intermediate for (S) Propanesulfonic
liquid soap acid, 1(or 2)-
component; hydroxy-, monosodium
intermediate for salt
surfactant
P-06-0525 05/15/06 08/12/06 Huntsman Corporation (S) Liquid soap (S) Octadecanoic
acid, methyl-2-
sulfoethyl ester,
sodium salt
P-06-0526 05/15/06 08/12/06 Huntsman Corporation (S) Liquid soap (S) 9-octadecanoic
acid, (9z)-, methyl-
2-sulfoethyl ester,
sodium salt
P-06-0527 05/15/06 08/12/06 Huntsman Corporation (S) Liquid soap (S) Fatty acids,
C8 18 and C18-
unsaturated, methyl-
2-sulfoethyl esters,
sodium salt
P-06-0528 05/15/06 08/12/06 Huntsman Corporation (S) Liquid soap (S) Fatty acids,
coco, hydrogenated,
methyl-2-sulfoethyl
ester, sodium salt
P-06-0529 05/15/06 08/12/06 Huntsman Corporation (S) Liquid soap (S) Fatty acids,
coco, heavy
fractions, methyl-2-
sulfoethyl esters,
sodium salts
P-06-0530 05/11/06 08/08/06 Septon Company of (S) Adhesives; (S) 2,5-furandione,
America lubricant; emulsion polymer with 2-
methyl-1-propene,
amide imide
P-06-0531 05/15/06 08/12/06 Oleon Americas, Inc. (G) Lubricant base (S) Fatty acids,
oil coco, esters
P-06-0532 05/17/06 08/14/06 CBI (G) Coating component (G) Substituted
styrene acrylate
copolymer
P-06-0533 05/17/06 08/14/06 CBI (G) Binder resin (G)
``Carbomonocycledica
rboxylic acid,
polymer with
alkenedioic acid,
1,3-dihydro-1,3-
dioxo-5-
isobenzofurancarboxy
lic acid, dihydro-3-
(tetrapropenyl)-2,5-
furandione,
.alpha.,.alpha.'-[(1-
methylethylidene)dic
arbomonocycle]bis[.o
mega.-
hydroxypoly(oxy-1,2-
ethanediyl)]
and
.alpha., .alpha.'-
[(1-
methylethylidene)dic
arbomonocycle]bis[.o
mega.-
hydroxypoly[oxy(meth
yl-1,2-
ethanediyl)]]''
P-06-0534 05/17/06 08/14/06 CBI (S) Base resin for (G) Oxirane based
ultraviolet light polymer with 5-
and electron beam isocyanato-1-
curable formulations (isocyanatomethyl)-
1,3,3-
trimethylycylohexane
, 2-hydroxyethyl
acrylate-blocked
P-06-0535 05/19/06 08/16/06 BASF Corporation (G) Automotive (G) Ester urethane
application
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
II. 26 Notices of Commencement From: 05/01/06 to 05/19/06
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-02-0256 05/01/06 04/25/06 (G) Polyester polyether
isocyanate
P-03-0591 05/01/06 03/23/06 (G) Water dispersable
polyurethane polymer
P-04-0289 05/17/06 04/21/06 (G) Ethylene -
tetrafluoroethylene
copolymer
P-04-0291 05/16/06 05/03/06 (G) Isocyanate functional
polyester urethane
polymer
P-04-0422 05/02/06 04/21/06 (G) Tetraalkyl indone
P-04-0536 05/16/06 04/20/06 (G) Polyurethane
P-04-0636 05/04/06 04/22/06 (G) Cuprate,
[[[[[[[(sulfonaphthalenyl
)]azo]-
(substitutedphenyl)]azo]-
(substitutedsulfonaphthal
enyl)]azo]-
substitutedphenyl-
substituted
heteromonocycle], sodium
salts
P-04-0721 05/12/06 05/08/06 (G) Polysiloxane,
aminoalkyl terminated
polymers with urea
functionality
alkylcyclohexane
P-04-0844 05/15/06 04/20/06 (G) Polyalkylene
phthalocyanine
P-04-0888 05/10/06 04/12/06 (G) Dynacoll 7130
P-04-0950 05/09/06 05/01/06 (G) Reaction product of
substituted
naphthalenesulfonic acid
azo substituted phenyl
amino substituted
triazine compound and
substituted phenyl azo
substituted
naphthalenesulfonic acid
[[Page 33454]]
P-05-0439 05/05/06 03/10/06 (G) Acetate polymer with
unsaturated alkane and
alkenol, cyclic acetal
with aldehyde
P-05-0508 05/08/06 04/10/06 (S) Neodecanoic acid,
oxiranylmethyl ester,
polymer with 1,4-
cyclohexanedimethanol, 5-
isocyanato-1-
(isocyanatomethyl)-1,3,3-
trimethylcyclohexane and
methyloxirane polymer
with oxirane 2-
aminopropyl methyl ether
P-05-0585 05/08/06 04/10/06 (S) 2-propenoic acid, 2-
methyl-, polymer with
butyl 2-methyl-2-
propenoate, 1,1-
dimethylethyl 2-methyl-2-
propenoate and 2-
hydroxyethyl 2-methyl-2-
propenoate, tert-bu
peroxide-initiated
P-05-0673 05/11/06 05/03/06 (G) Siloxane coated silica
nanoparticles
P-06-0029 05/02/06 04/19/06 (G) Amine modified monomer
acrylate
P-06-0105 05/17/06 04/25/06 (S) Coke(coal tar), low-
temp., low-temp.
gasification pitch,
calcined
P-06-0120 05/09/06 04/18/06 (G) Naphthalenedisulfonic
acid salt
P-06-0156 04/28/06 04/14/06 (S) Silane,
ethenyltrimethoxy-,
reaction products with 1-
butene-ethylene-propene
polymer
P-06-0228 05/15/06 04/11/06 (G) Alkylcarbosilane
polymer
P-06-0235 05/15/06 04/11/06 (G) Product 1: alkoxylated
chloro-substituted
alkylchlorosilane, chloro-
substituted alkyl
alkoxysilane
P-06-0236 05/15/06 04/11/06 (G) Product 2: alkoxylated
chloro-substituted
alkylchlorosilane, chloro-
substituted alkyl
alkoxysilane
P-06-0251 05/17/06 05/04/06 (G) Sodium salt of the
copolymer of acrylic
acid. methyl
methacrylate, p-
sulfophenymethallylether,
sodium salt, sodium
methallylsulfonate, 2-
acrylamido-2-
methylpropane sulfonic
acid sodium salt
P-06-0270 05/16/06 05/10/06 (S) Fatty acids, C16 18,
isononyl esters
P-93-1700 05/15/06 05/05/06 (G) Polyester polyol
isocyanate polymer
P-99-0858 05/09/06 05/01/06 (G) Polyester polyether
isocyanate polymer
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: May 31, 2006.
LaRona M. Washington,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. E6-8931 Filed 6-8-06; 8:45 am]
BILLING CODE 6560-50-S