![[logo] US EPA](http://www.epa.gov/epafiles/images/logo_epaseal.gif){kind=logo}
Certain New Chemicals; Receipt and Status Information
Note: EPA no longer updates this information, but it may be useful as a reference or resource.
PDF Version (6 pp, 277K, About PDF) [Federal Register: August 20, 2008 (Volume 73, Number 162)] [Notices] [Page 49189-49194] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr20au08-52] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2008-0628; FRL-8379-7] Certain New Chemicals; Receipt and Status Information AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from July 28, 2008 through August 1, 2008, consists of the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. DATES: Comments identified by the specific PMN number or TME number, must be received on or before September 19, 2008. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2008-0628, by one of the following methods: • Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments. • Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001. • Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number EPA-HQ-OPPT-2008-0628. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information. Instructions: Direct your comments to docket ID number EPA-HQ-OPPT- [[Page 49190]] 2008-0628. EPA's policy is that all comments received will be included in the docket without change and may be made available on-line at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e- mail. The regulations.gov website is an ``anonymous access'' system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e- mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses. For additional information about EPA's public docket, visit the EPA Docket Center homepage at http://www.epa.gov/epahome/dockets.htm. Docket: All documents in the docket are listed in the docket index available in regulations.gov. To access the electronic docket, go to http://www.regulations.gov, select ``Advanced Search,'' then ``Docket Search.'' Insert the docket ID number where indicated and select the ``Submit'' button. Follow the instructions on the regulations.gov website to view the docket index or access available documents. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http:// www.regulations.gov, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding Federal holidays. The telephone number of the EPA/DC Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure. FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov. SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT. B. What Should I Consider as I Prepare My Comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When submitting comments, remember to: i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number). ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number. iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes. iv. Describe any assumptions and provide any technical information and/or data that you used. v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced. vi. Provide specific examples to illustrate your concerns and suggest alternatives. vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats. viii. Make sure to submit your comments by the comment period deadline identified. II. Why is EPA Taking this Action? Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from July 28, 2008 through August 1, 2008, consists of the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. Receipt and Status Report for PMNs This status report identifies the PMNs and TME, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available. In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number [[Page 49191]] assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity. I. 65 Premanufacture Notices Received From: 07/28/08 to 08/01/08 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- P-08-0547 07/21/08 10/18/08 CBI (G) Additive, open, (G) Polyether non-dispersive use urethane block copolymer compound with unsaturated fatty acids P-08-0548 07/21/08 10/18/08 CBI (G) Additive, open, (G) Polyether non-dispersive use modified polyurethane P-08-0549 07/21/08 10/18/08 CBI (G) Additive, open, (G) Polyether non-dispersive use modified polydimethylsiloxane P-08-0550 07/21/08 10/18/08 Honeywell Specialty (G) Foam additive (S) 1-propene, Materials 1,3,3,3-tetrafluoro- , (1E)- P-08-0551 07/21/08 10/18/08 Honeywell Specialty (S) Chemical (S) 1-propene, Materials intermediate (as CIS- 1,3,3,3-tetrafluoro- isomer) , (1Z)- P-08-0552 07/21/08 10/18/08 CBI (G) Industrial wood (G) Multifunctional coating acrylate P-08-0553 07/21/08 10/18/08 CBI (G) industrial wood (G) Polycarbonate applications polyurethane acrylate oligomer P-08-0554 07/22/08 10/19/08 CBI (G) Aqueous (G) Aqueous polyurethane rubber polyurethane coating resin for dispersion open, non-dispersive use P-08-0555 07/24/08 10/21/08 CBI (G) Polymer used in (G) Polymer of electronics aromatic manufacture dianhydride, aromatic diamine and polysiloxanediamine. P-08-0556 07/28/08 10/25/08 CBI (G) Open non- (G) Aromatic dispersive prepolymer based on TDI P-08-0557 07/25/08 10/22/08 Cytec Industries Inc. (G) Coatings resin (G) Acrylated aliphatic polyurethane P-08-0558 07/28/08 10/25/08 CBI (S) Polyurethane (G) Polyurethane acrylate used in the acrylate manufacture of ultra violet curable coatings P-08-0559 07/28/08 10/25/08 CBI (G) Chemical (G) Aliphatic intermediate ketoxime P-08-0560 07/29/08 10/26/08 DIC International, (G) Additive for (G) Modified LLC. lubricants polyalkyldiene polymer P-08-0561 07/29/08 10/26/08 CBI (S) Ingredient in (G) Cycloaklyl fragrance compound piperonyl ether P-08-0562 07/29/08 10/26/08 CBI (G) Mining aid (S) Tall oil, maleated, oxidized, sodium salts P-08-0563 07/29/08 10/26/08 CBI (G) Mining aid (S) Tall oil, maleated, oxidized, potassium salts P-08-0564 07/29/08 10/26/08 CBI (G) Mining aid (S) Tall oil, maleated, oxidized, calcium salts P-08-0565 07/29/08 10/26/08 CBI (G) Mining aid (S) Tall oil, maleated, oxidized, ammonium salts P-08-0566 07/29/08 10/26/08 CBI (G) Mining aid (S) Fatty acids, tall oil, maleated, oxidized, sodium salts P-08-0567 07/29/08 10/26/08 CBI (G) Mining aid (S) Fatty acids, tall oil, maleated, oxidized, potassium salts P-08-0568 07/29/08 10/26/08 CBI (G) Mining aid (S) Fatty acids, tall oil, maleated, oxidized, calcium salts P-08-0569 07/29/08 10/26/08 CBI (G) Mining aid (S) Fatty acids, tall oil, maleated, oxidized, ammonium salts P-08-0570 07/29/08 10/26/08 CBI (G) Mining aid (S) Fatty acids, tall oil, polymd., oxidized, sodium salts P-08-0571 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer with acrylate, ketoacrylamide, styrene and acrylate P-08-0572 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer with acrylate, ketoacrylamide, styrene and acrylate, ammonium salt P-08-0573 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer with acrylate, ketoacrylamide, styrene and acrylate, sodium salt P-08-0574 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer with acrylate, ketoacrylamide, styrene and acrylate, potassium salt P-08-0575 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer with acrylate, ketoacrylamide, styrene and acrylate, compound with amino alcohol P-08-0576 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer with acrylate, ketoacrylamide, styrene and acrylate, compound with amino alcohol [[Page 49192]] P-08-0577 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate coating, ink oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate and epoxy diacrylate with .beta.- diketone. P-08-0578 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate coating, ink oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate and epoxy diacrylate with .beta.- diketone. P-08-0579 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate coating, ink oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate and epoxy diacrylate with .beta.- diketone. P-08-0580 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate coating, ink oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate and epoxy diacrylate with .beta.- diketone. P-08-0581 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate coating,ink oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate and epoxy diacrylate with .beta.- diketone. P-08-0582 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate coating, ink oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate and epoxy diacrylate with .beta.- diketone. P-08-0583 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate coating, ink oligomer product from base-catalyzed reaction of triacrylate, diacrylate, .beta.- ketoester and dialkylmine. P-08-0584 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate coating, ink oligomer product from base-catalyzed reaction of triacrylate, diacrylate, .beta.- ketoester and dialkylmine. P-08-0585 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate coating, ink oligomer product from base-catalyzed reaction of triacrylate, diacrylate, .beta.- ketoester and dialkylmine. P-08-0586 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate coating, ink oligomer product from base-catalyzed reaction of triacrylate, diacrylate, .beta.- ketoester and dialkylmine. P-08-0587 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate coating, ink oligomer product from base-catalyzed reaction of triacrylate, diacrylate, .beta.- ketoester and dialkylmine. P-08-0588 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate coating, ink oligomer product from base-catalyzed reaction of triacrylate, diacrylate, .beta.- ketoester and dialkylmine. P-08-0589 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-ketoester P-08-0590 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-ketoester P-08-0591 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-ketoester P-08-0592 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-ketoester P-08-0593 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-ketoester [[Page 49193]] P-08-0594 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-ketoester P-08-0595 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-diketone. P-08-0596 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-diketone. P-08-0597 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-diketone. P-08-0598 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-diketone. P-08-0599 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-diketone. P-08-0600 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-diketone. P-08-0601 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-ketoester. P-08-0602 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-ketoester. P-08-0603 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-ketoester. P-08-0604 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-ketoester. P-08-0605 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-ketoester. P-08-0606 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate adhesive oligomer product from base-catalyzed reaction of tetraacrylate, triacrylate, epoxy diacrylate and .beta.-ketoester. P-08-0607 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Aliphatic adhesive urethane diacrylate monomer from diisocyanate and monoepoxide acrylate ester. P-08-0608 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Aliphatic adhesive urethane diacrylate monomer from diisocyanate and monoepoxide acrylate ester P-08-0609 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Aliphatic adhesive urethane diacrylate monomer from diisocyanate and monoepoxide acrylate ester P-08-0610 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Aliphatic adhesive urethane diacrylate monomer from diisocyanate and monoepoxide acrylate ester P-08-0611 08/01/08 10/29/08 CBI (G) Rubber additive (G) Isocyanate polymer -------------------------------------------------------------------------------------------------------------------------------------------------------- [[Page 49194]] In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received: II. 1 Test Marketing Exemption Notices Received From: 07/28/08 to 08/01/08 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- T-08-0017 07/25/08 09/07/08 Cytec Industries Inc. (G) Coatings resin (G) Acrylated aliphatic polyurethane -------------------------------------------------------------------------------------------------------------------------------------------------------- In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received: III. 18 Notices of Commencement From: 07/28/08 to 08/1/08 ---------------------------------------------------------------------------------------------------------------- Commencement Notice Case No. Received Date End Date Chemical ---------------------------------------------------------------------------------------------------------------- P-06-0423 07/31/08 07/18/08 (G) 2-Propenoic acid, 2- methyl-, 1,2-ethanediyl ester, telomer with alkyl 2- [[(alkylthio)thioxomethyl ]thio]-2-methylalkanoate, alkyl methacrylate and me methacrylate, tert-bu 2- ethylhexaneperoxoate- initiated P-07-0639 07/30/08 07/18/08 (G) Ether carboxylic acid amide P-07-0662 07/18/08 06/30/08 (G) Substituted alkenyl- terminated siloxanes and silicones polymers with substituted acrylates, peroxide initiated P-08-0105 07/22/08 06/29/08 (G) Azo compound P-08-0114 07/29/08 06/25/08 (G) Alkanoic acid, ethenyl ester, polymer with ethenyl acetate and alkyl 2-propenoate P-08-0121 08/01/08 07/10/08 (G) Acryloylisocyanate P-08-0124 07/30/08 07/18/08 (G) Quaternary ammonium compound P-08-0209 07/28/08 07/23/08 (G) Poly(oxy-1,2- ethanediyl), .alpha.-bis alkyl substituted hydroxyphenyl ester- .omega.-bis alkyl substituted hydroxyphenyl ester P-08-0265 08/01/08 07/08/08 (G) Polymer of isocyanic acid, polymethylene polyphenylene ester, with alkyl polyamine, .alpha.- hydro-.gamma.- hydroxypoly[(oxy(methyl- 1,2-ethanediyl)) and methyloxirane P-08-0275 07/18/08 07/07/08 (S) Cesium tungsten oxide P-08-0310 07/24/08 07/19/08 (G) Heteromonocycle carboxylic acid, (3- chloro-2-pyridinyl)-oxo-, ethyl ester P-08-0327 07/23/08 07/14/08 (G) Halogenated aromatic ester derivatives P-08-0333 07/25/08 06/28/08 (G) Fatty acids, C18- unsaturated, dimers, polymer with alkyldioic acids, ethylenediamine, dialkylcyclicdiamine, and tall-oil fatty acid P-08-0335 07/25/08 06/28/08 (G) Fatty acids, C18- unsaturated, dimers, polymer with alkyldioic acid, ethylenediamine, dialkyloxydiamine, and tall-oil fatty acid P-08-0344 07/18/08 07/10/08 (S) 1,3-dioxepin, 4,7- dihydro-2-(1,1,4- trimethyl-3-pentenyl yl)- P-08-0352 07/28/08 07/17/08 (G) Alkyl acrylate polymer with inorganic acid and alkoxyethyl acrylate, alkyl ester P-08-0384 07/31/08 07/21/08 (G) Vegetable oils, esters with polyols P-95-0231 07/28/08 02/23/00 (G) Polyester resin ---------------------------------------------------------------------------------------------------------------- List of Subjects Environmental protection, Chemicals, Premanufacturer notices. Dated: Augut 13, 2008. Chandler Sirmons, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. E8-19304 Filed 8-19-08; 8:45 am] BILLING CODE 6560-50-S