Chapter 1: Introduction to Molds
- What Molds Are
- What Mold Needs to Grow
- Health Effects That May Be Caused by Inhaling Mold or Mold Spores
- Mycotoxins and Health Effects
- The Color of Mold
- Moldy Smell
- Knowledge Test
Lesson 1 - What Molds Are
Mold spores are ubiquitous; they are found both indoors and outdoors. Mold spores cannot be eliminated from indoor environments. Some mold spores will be found floating through the air and in settled dust; however, they will not grow if moisture is not present.
Mold is not usually a problem indoors — unless mold spores land on a wet or damp spot and begin growing. As molds grow they digest whatever they are growing on. Unchecked mold growth can damage buildings and furnishings; molds can rot wood, damage drywall, and eventually cause structural damage to buildings. Mold can cause cosmetic damage, such as stains, to furnishings. The potential human health effects of mold are also a concern. It is important, therefore, to prevent mold from growing indoors.
Lesson 2 - What Mold Needs to Grow
To grow indoors, mold needs moisture and food. Moisture is the most important factor influencing mold growth indoors. Controlling indoor moisture helps limit mold growth.
Moisture control is the key to mold control.
Besides moisture, mold needs nutrients, or food, to grow. Mold can grow on virtually any organic substance. Most buildings are full of organic materials that mold can use as food, including paper, cloth, wood, plant material, and even soil. In most cases, temperature is not an issue; some molds grow in warm areas, while others prefer cool locations such as bread stored in a refrigerator. Often, more than one type of mold can be found growing in the same area, although conditions such as moisture, light, and temperature may favor one species of mold over another.
Buildings that have been heavily damaged by flood waters should be assessed for structural integrity and remediated by experienced professionals. Please note that the guidelines covered in this course were developed for damage caused by clean water (not flood water, sewage, or other contaminated water). See the EPA Resource List, which includes the EPA Fact Sheet: Flood Cleanup - Avoiding Indoor Air Quality Problems (PDF) (2 pp., 36 K, about PDF), for more information.
Lesson 3 - Health Effects That May Be Caused by Inhaling Mold or Mold Spores
Inhalation exposure to mold indoors can cause health effects in some people. Molds produce allergens (substances that can cause allergic reactions), irritants, and, in some cases, potentially toxic substances or chemicals (mycotoxins). Inhaling or touching mold or mold spores may cause allergic reactions in sensitive individuals. Mold does not have to be alive to cause an allergic reaction. Dead or alive, mold can cause allergic reactions in some people.
Allergic Reactions, Asthma Attacks, Irritant Effects
Allergic reactions to mold are common and can be immediate or delayed. Repeated or single exposure to mold, mold spores, or mold fragments may cause non-sensitive individuals to become sensitive to mold, and repeated exposure has the potential to increase sensitivity. Allergic responses include hay fever-like symptoms such as headache, sneezing, runny nose, red eyes, and skin rash (dermatitis). Molds can cause asthma attacks in people with asthma who are allergic to mold. In addition, molds can irritate the eyes, skin, nose, throat, and lungs of individuals whether or not they are allergic to mold.
Other Health Effects
Breathing in mold may also cause hypersensitivity pneumonitis, an uncommon disease that resembles bacterial pneumonia. In addition, mold exposure may result in opportunistic infections in persons whose immune systems are weakened or suppressed.
When mold grows indoors, the occupants of a building may begin to report odors and a variety of symptoms including headaches, difficulty breathing, skin irritation, allergic reactions, and aggravated asthma symptoms. These and other symptoms may be associated with exposure to mold. But all of these symptoms may be caused by other exposures or conditions unrelated to mold growth. Therefore, it is important not to assume that, whenever any of these symptoms occurs, mold is the cause.
For more detailed information on mold and its health effects, consult a health professional. You may also wish to consult your state or local health department. (Also see the Resource List for additional information.)
Although mold is frequently found in damp buildings, it is not the only potential contaminant — biological contaminants other than mold, and non-biological contaminants are often present and may also cause health effects. Damp buildings may attract rodents and other pests. Damp or wet building components and furnishings may release chemicals indoors.
Potential contaminants in damp or wet buildings include bacteria, dust mites, cockroaches and other pests, as well as chemicals emitted by damp building materials and furnishings. For more information on damp buildings and health effects, see the 2004 Institute of Medicine Report, Damp Indoor Spaces and Health, published by The National Academies Press in Washington, DC - See Resource List.
Lesson 4 - Mycotoxins and Health Effects
As molds grow, some (but not all) of them may produce potentially toxic byproducts called mycotoxins under some conditions. Some of these molds are commonly found in moisture-damaged buildings. More than 200 mycotoxins from common molds have been identified, and many more remain to be identified. The amount and types of mycotoxins produced by a particular mold depends on many environmental and genetic factors. No one can tell whether a mold is producing mycotoxins just by looking at it. Some mycotoxins are known to affect people, but for many mycotoxins little health information is available. Research on mycotoxins is ongoing. Exposure to mycotoxins can occur from inhalation, ingestion, and skin contact. It is prudent to avoid unnecessary inhalation exposure to mold.
For more information on mycotoxins, see the 2004 Institute of Medicine Report, Damp Indoor Spaces and Health, published by The National Academies Press in Washington, DC.
Lesson 5 - The Color of Mold
Lesson 6 - Moldy Smell
Some compounds produced by molds have strong smells and are volatile and quickly released into the air. These compounds are known as microbial volatile organic compounds (mVOCs). Because mVOCs often have strong or unpleasant odors, they can be the source of the "moldy odor" or musty smell frequently associated with mold growth. A moldy odor suggests that mold is growing in the building and should be investigated.
The health effects of inhaling mVOCs are largely unknown, although exposure to mVOCs has been linked to symptoms such as headaches, nasal irritation, dizziness, fatigue, and nausea. More research is needed to determine whether there are any human health effects from non-occupational indoor exposures to mVOCs.
Lesson 7 - Biocides
Biocides are substances that can destroy living organisms. The use of a biocide or a chemical that kills organisms such as mold (chlorine bleach, for example) is not recommended as a routine practice during mold cleanup. There may be instances, however, when professional judgment indicates their use (for example, when immune-compromised individuals are present).
In most cases, it is not possible or desirable to sterilize an area; a background level of mold spores will remain, but these spores will not grow if the moisture problem has been resolved. If disinfectants or biocides are used, always ventilate the area and exhaust the air to the outdoors. Never mix chlorine bleach with other cleaning solutions or with detergents that contain ammonia because toxic fumes could be produced.
Please note: Dead mold is allergenic and may cause allergic reactions and other health effects in some individuals, so it is not enough to simply kill the mold. It must also be removed.
|Mold Basics Mold Cleanup Cleanup Guidelines||Hidden Mold Image Library Introduction to Mold||Mold Course Prevention and Control Tips What to Wear When Cleaning Mold||Flood Cleanup Español Indoor Air Quality|