Boat Pressure Wash Water Control Technologies Virtual Trade Show
Introduction

Discharge of pressure wash water is not allowed without a permit. In this case, the pressure wash water was being channeled into a treatment system and eventually discharged into a municipal sewer system.
Photo credit: Thomas MaGuire, Massachusetts Department of Environmental Protection
Under the Clean Water Act, EPA and states (when approved by EPA) regulate point sources that discharge pollutants into waters of the United States through the National Pollutant Discharge Elimination System (NPDES) permit program. Discharges within a marina facility or boatyard that typically require NPDES permits include process water, cooling water, and storm water runoff from drainage systems.
Any permit of this type issued to control marine pressure washing discharges is required to impose discharge limitations to ensure that state water quality standards are met in the receiving water. The concentrations of metals in these discharges can be high in comparison to water quality standards. Meeting water quality standards is thus likely to require the installation of a wastewater treatment system to comply with the requirements of such a permit. This approach is likely not the most cost effective option for most boat yards and marinas. The most promising options are:
- Recycling
- Containment followed by off-site disposal
- Discharge via a connection to a Publicly Owned Treatment Works
- Pollution prevention measures such as filtration and treatment which can be part of a recycling or containment system
The virtual trade show is designed to introduce marina and boatyard owners to technologies for controlling pressure wash water, such as recycling systems, containment tanks, and filtration-related products. We hope visitors to the trade show find this information useful.
For more information or questions contact the EPA New England Marina Assistance Team at (617) 918-1836.
![[logo] US EPA](http://www.epa.gov/epafiles/images/logo_epaseal.gif)