Basic Information about Simazine in Drinking Water
Simazine at a Glance
Maximum Contaminant Level (MCL) = 0.004 milligrams per Liter (mg/L) or 4 parts per billion (ppb)
Maxlmum Contaminant Level Goal (MCLG) = 0.004 mg/L or 4 ppb
Some people who drink water containing simazine in excess of the MCL over many years could experience problems with their blood.
Chemical Abstract Service Registry Number
Sources of Contamination
EPA regulates simazine in drinking water to protect public health. Simazine may cause health problems if present in public or private water supplies in amounts greater than the drinking water standard set by EPA.
- What is simazine?
- Uses for simazine.
- What are simazine's health effects?
- What are EPA's drinking water regulations for simazine?
- How does simazine get into my drinking water?
- How will I know if simazine is in my drinking water?
- How will simazine be removed from my drinking water?
- How do I learn more about my drinking water?
Uses for simazine.
Simazine is used as a pre-emergence herbicide used for control of broad-leaved and grassy weeds on a variety of deep-rooted crops such as artichokes, asparagus, berry crops, broad beans, citrus, etc., and on non-crop areas such as farm ponds and fish hatcheries. Its major use is on corn where it is often combined with AAtrex. Other herbicides with which simazine is combined include: paraquat, on apples, peaches; Roundup or Oust for noncrop use; Surflan on Christmas trees; Dual on corn and ornamentals.
If you are concerned about simazine in a private well, please visit:
This health effects language is not intended to catalog all possible health effects for simazine. Rather, it is intended to inform consumers of some of the possible health effects associated with simazine in drinking water when the rule was finalized.
What are EPA's drinking water regulations for simazine?
In 1974, Congress passed the Safe Drinking Water Act. This law requires EPA to determine safe levels of contaminants in drinking water which do or may cause health problems. These non-enforceable health goals, based solely on possible health risks and exposure over a lifetime, are called maximum contaminant level goals (MCLG). Contaminants are any physical, chemical, biological or radiological substances or matter in water.
The MCLG for simazine is 0.004 mg/L or 4 ppb. EPA has set this level of protection based on the best available science to prevent potential health problems. EPA has set an enforceable regulation for simazine, called a maximum contaminant level (MCL), at 0.004 mg/L or 4 ppb. MCLs are set as close to the health goals as possible, considering cost, benefits and the ability of public water systems to detect and remove contaminants using suitable treatment technologies. In this case, the MCL equals the MCLG, because analytical methods or treatment technology do not pose any limitation.
The Phase V Rule, the regulation for simazine, became effective in 1994. The Safe Drinking Water Act requires EPA to periodically review the national primary drinking water regulation for each contaminant and revise the regulation, if appropriate. EPA reviewed simazine as part of the Six Year Review and determined that the 0.004 mg/L or 4 ppb MCLG and 0.004 mg/L or 4 ppb MCL for simazine are still protective of human health.
States may set more stringent drinking water MCLGs and MCLs for simazine than EPA.
A federal law called the Emergency Planning and Community Right to Know Act (EPCRA) requires facilities in certain industries, which manufacture, process, or use significant amounts of toxic chemicals, to report annually on their releases of these chemicals. For more information on the uses and releases of chemicals in your state, contact the Community Right-to-Know Hotline: (800) 424-9346.
- EPA's Toxics Release Inventory (TRI) Web site provides information about the types and amounts of toxic chemicals that are released each year to the air, water, and land.
How will I know if simazine is in my drinking water?
When routine monitoring indicates that simazine levels are above the MCL, your water supplier must take steps to reduce the amount of simazine so that it is below that level. Water suppliers must notify their customers as soon as practical, but no later than 30 days after the system learns of the violation. Additional actions, such as providing alternative drinking water supplies, may be required to prevent serious risks to public health.
If your water comes from a household well, check with your health department or local water systems that use ground water for information on contaminants of concern in your area.
How do I learn more about my drinking water?
EPA strongly encourages people to learn more about their drinking water, and to support local efforts to protect the supply of safe drinking water and upgrade the community water system. Your water bill or telephone book's government listings are a good starting point for local information.
Contact your water utility. EPA requires all community water systems to prepare and deliver an annual consumer confidence report (CCR) (sometimes called a water quality report) for their customers by July 1 of each year. If your water provider is not a community water system, or if you have a private water supply, request a copy from a nearby community water system.
Other EPA Web sites
- Find an answer or ask a question about drinking water contaminants on EPA's Question and Answer Web site or call EPA's Safe Drinking Water Hotline at (800) 426-4791
- EPA's Integrated Risk Information System
- EPA's Substance Registry System
- Office of Pesticide Programs, Pesticide Registration Status, Simazine
Other Federal Departments and Agencies