Jump to main content.


Basic Information about Dalapon in Drinking Water

Dalapon at a Glance

Maximum Contaminant Level (MCL) = 0.2 milligrams per Liter (mg/L) or 200 parts per billion (ppb)

Maximum Contaminant Level Goal (MCLG) = 0.2 mg/L or 200 ppb

Health Effects
Some people who drink water containing dalapon well in excess of the MCL over many years could experience minor kidney changes.

Drinking Water Health Advisories provide more information on health effects

Chemical Abstract Service Registry Number
75-99-0

Sources of Contamination
Runoff from herbicide used on rights of way

List of all Regulated Contaminants (PDF) (6 pp, 396K, About PDF)

EPA regulates dalapon in drinking water to protect public health. Dalapon may cause health problems if present in public or private water supplies in amounts greater than the drinking water standard set by EPA.

What is dalapon?
Dalapon is a colorless liquid with an acrid odor sold as sodium or magnesium salt.

Uses for dalapon.
Dalapon is an herbicide used to control grasses in a wide variety of crops, including fruit trees, beans, coffee, corn, cotton and peas. It is also registered for use in a number of non-crop applications such as lawns, drainage ditches, along railroad tracks, and in industrial areas.

If you are concerned about dalapon in a private well, please visit:

What are dalapon's health effects?
Some people who drink water containing dalapon well in excess of the maximum contaminant level (MCL) for many years could experience minor kidney changes.

This health effects language is not intended to catalog all possible health effects for dalapon. Rather, it is intended to inform consumers of some of the possible health effects associated with dalapon in drinking water when the rule was finalized.

Top of page

What are EPA's drinking water regulations for dalapon?
In 1974, Congress passed the Safe Drinking Water Act. This law requires EPA to determine the level of contaminants in drinking water at which no adverse health effects are likely to occur. These non-enforceable health goals, based solely on possible health risks and exposure over a lifetime with an adequate margin of safety, are called maximum contaminant level goals (MCLG). Contaminants are any physical, chemical, biological or radiological substances or matter in water.

The MCLG for dalapon is 0.2 mg/L or 200 ppb. EPA has set this level of protection based on the best available science to prevent potential health problems. EPA has set an enforceable regulation for dalapon, called a maximum contaminant level (MCL), at 0.2 mg/L or 200 ppb. MCLs are set as close to the health goals as possible, considering cost, benefits and the ability of public water systems to detect and remove contaminants using suitable treatment technologies. In this case, the MCL equals the MCLG, because analytical methods or treatment technology do not pose any limitation.

The Phase V Rule, the regulation for dalapon, became effective in 1994. The Safe Drinking Water Act requires EPA to periodically review the national primary drinking water regulation for each contaminant and revise the regulation, if appropriate. EPA reviewed dalapon as part of the Six Year Review and determined that the 0.2 mg/L or 200 ppb MCLG and 0.2 mg/L or 200 ppb MCL for dalapon are still protective of human health.

States may set more stringent drinking water MCLGs and MCLs for dalapon than EPA.

Top of page

How does dalapon get into my drinking water?
The major source of dalapon in drinking water is runoff from herbicide used on rights of way.

A federal law called the Emergency Planning and Community Right to Know Act (EPCRA) requires facilities in certain industries, which manufacture, process, or use significant amounts of toxic chemicals, to report annually on their releases of these chemicals. For more information on the uses and releases of chemicals in your state, contact the Community Right-to-Know Hotline: (800) 424-9346.

Top of page

How will I know if dalapon is in my drinking water?
When routine monitoring indicates that dalapon levels are above the MCL, your water supplier must take steps to reduce the amount of dalapon so that it is below that level. Water suppliers must notify their customers as soon as practical, but no later than 30 days after the system learns of the violation. Additional actions, such as providing alternative drinking water supplies, may be required to prevent serious risks to public health.

If your water comes from a household well, check with your health department or local water systems that use ground water for information on contaminants of concern in your area.

Top of page

How will dalapon be removed from my drinking water?
The following treatment method(s) have proven to be effective for removing dalapon to below 0.2 mg/L or 200 ppb: granular activated carbon.

Top of page

How do I learn more about my drinking water?
EPA strongly encourages people to learn more about their drinking water, and to support local efforts to protect the supply of safe drinking water and upgrade the community water system. Your water bill or telephone book's government listings are a good starting point for local information.

Contact your water utility. EPA requires all community water systems to prepare and deliver an annual consumer confidence report (CCR) (sometimes called a water quality report) for their customers by July 1 of each year. If your water provider is not a community water system, or if you have a private water supply, request a copy from a nearby community water system.

The CCR summarizes information regarding sources used (i.e., rivers, lakes, reservoirs, or aquifers), any detected contaminants, compliance and educational information.

Some water suppliers have posted their annual reports on EPA's Web site.

Other EPA Web sites

Top of page

Safewater Home | About Our Office | Publications | Questions and Answers | Links | Office of Water | En Español


Local Navigation


Jump to main content.