Jump to main content or area navigation.

Contact Us

facebook iconLike Us on Facebook 
You are here: EPA Home » DfE » Alternatives Assessments


The following is a general list of References used in the preparation of this text,
but not specifically cited in the body of the report.

Coombs, Clyde F., Printed Circuits Handbook, McGraw-Hill, 1988.

Folsom, D. W., Gavaskar, A. R., Jones, J. A., and Olfenbuttel, R. F., "Carbon Black Dispersion Pre-Plating Technology for Printed Wire Board Manufacturing," U.S. EPA Risk Reduction Laboratory, Cincinnati, Ohio.

Pitts, Greg, et al., "Environmental Consciousness: A Strategic Competitiveness Issue for the Electronics and Computer Industry," MCC, et al., March, 1993.

Rivera, Carlos, and Declue, Gary, "Ammoniacal Etchant Regeneration and Copper Recovery," 7th Annual AESF/EPA Conference on Environmental Control for the Surface Finishing Industry, 1986.

U.S. EPA, "Emissions From PWB Manufacturing, Draft Report," Scientific Consulting Group, Inc., March, 1995.

IPCExit Disclaimer

Jump to main content.