Jump to main content or area navigation.

Contact Us

facebook iconLike Us on Facebook 
You are here: EPA Home » DfE » Printed Wiring Board Findings & Accomplishments

Printed Wiring Board Findings & Accomplishments

Printed Wiring Board Home | About This Project | Findings & Accomplishments | Publications | Partners

Implementing Cleaner Technologies in the Printed Wiring Board Industry: Making Holes Conductive
February 1997
Final Printed Wiring Board Cleaner Technologies Substitutes Assessment: Making Holes Conductive (MHC)
August 1998
MHC Cleaner Technologies Substitute Assessment Summary Document
September 1998
PWB Pollution Prevention and Control: Analysis of Updated Survey Results
October 1998
Surface finishes performance demonstration
February 2000
Draft CTSA: Surface Finishes
December 2000
Final CTSA: Surface Finishes
August 2001
Surface Finishes CTSA Summary Document
February 2001

The DfE Program has contributed to the increased use of cleaner technologies for Making Holes Conductive, from 15 percent to 30 percent between 1995 and 1997.

back to top

Jump to main content.