2007 Annual Progress Reports
You will need Adobe Reader to view some of the files on this page. See EPA's PDF page to learn more.
Background
As part of their commitment to the 2010/15 PFOA Stewardship Program, the eight participating companies agreed to submit annual progress reports on their reductions of PFOA, PFOA precursors and higher homologues in facility emissions and product content. Annual reports are due by October 31, for years 2007 through 2015. Progress is being measured against the baseline data submitted in October of 2006.
2007 Company Progress Reports
All eight companies submitted their progress reports by October 31, 2007. The submissions are presented in PDF file format and are linked from the company name. See the 2007 progress reports and summary tables below.
- 3M/Dyneon (PDF) (42 pp, 200K)
- Arkema Inc. (PDF) (3 pp, 268K)
- Asahi Glass Company (PDF) (6 pp, 225K)
- Ciba Specialty Chemicals Corporation (PDF) (2 pp, 543K)
- Clariant International Ltd. (PDF) (3 pp, 141K)
- Daikin America, Inc. (PDF) (4 pp, 78K)
- E.I. duPont de Nemours and Company (PDF) (22 pp, 556K)
- Solvay Solexis (PDF) (4 pp, 55K)
EPA's Summary Tables for 2007 Company Progress Reports
EPA has summarized the data from progress reports submitted by all the participating companies in their public reports in the four tables that appear below. Additional information may be obtained by viewing the specific company reports above. Download the 2007 Summary Tables here in (PDF) (9 pp, 49.4K)
Contents of Tables 1-4
Data for manufacturing sites in the United States, and for products manufactured in the U.S. Data for manufacturing sites located outside the United States, and for products manufactured outside the U.S. Actual emissions and product content Percent reduction in emissions and product content
Table 1 - Reported Emissions and Product Content of PFOA, Precursors, and Higher Homologues from U.S. Operations (cumulative reductions from baseline year through end of 2006)
| Company | Chemical Category | Releases to all media from FP and Telomer Manufacturing (kg) | Releases to all media from FP and Telomer Manufacturing | Dispersions (ppm wet-weight basis) |
Other Fluoropolymers (ppm dry-weight basis) | Telomers (ppm dry-weight basis, unless stated otherwise) |
|---|---|---|---|---|---|---|
Arkema |
PFOA and Higher Homologues |
>1,000 - 10,000 |
For FP Production: (> 0.1 - 1) kg / 100 kg | >500 - 1,000 | >70 - 150 | Not Applicable |
Precursors |
Not Applicable | |||||
Asahi |
PFOA and Higher Homologues |
4,922 |
For FP Production: < 1 kg / 100 kg | 500 - 1,570 | 0.12 | Not Applicable |
Precursors |
Not Applicable | |||||
Ciba |
PFOA |
0.05 kg (total for emissions and product content) |
||||
Higher Homologues |
0.05 kg (total for emissions and product content) |
|||||
Precursors |
0 kg (total for emissions and product content) |
|||||
Clariant |
Not Applicable |
|||||
Daikina |
PFOA |
CBI |
For FP Production: 8.0 x 10-3 kg / 100 kg |
280 |
Plastics: 2
Elastomers: 300
|
0.28 (wet-weight basis) |
For Telomer Production:
6.4 x 10-7 kg / 100 kg
|
||||||
Precursors and Higher Homologues |
CBI |
For Telomer Production: 0.027 kg / 100 kg |
Not Applicable |
Not Applicable |
2,500
(wet-weight basis)
|
|
DuPont |
PFOA, PFOA Salts |
1,100 |
Not Reported |
547 |
69 |
246 kg (global total product content in all product produced) |
Direct Precursors
(C8 Telomer A Iodide and the 8-2-8 Telomer B alcohol ester of PFOA)
|
CBI |
Not Reported |
Not Applicable |
Not Applicable |
57 kg (global total product content in all product produced)b |
|
3M/Dyneon |
PFOA |
0 |
0 |
0 |
Not Applicable |
Not Applicable |
Solvay Solexis |
PFOA and PFOA Salts |
Not Applicable |
Not Applicable |
600 - 700 |
Not Applicable |
Not Applicable |
Higher Homologues |
>1000 - 10,000 |
For FP Production: 0.161 kg/100 kg |
Not Applicable |
170-200 |
Not Applicable |
|
Precursors |
Not Applicable |
0 |
Not Applicable |
Not Applicable |
||
Table 2 - Reported Emissions and Product Content of PFOA, Precursors, and Higher Homologues from Non-U.S. Operations
| Company | Chemical Category | Releases to all media from FP and Telomer Manufacturing (kg) | Releases to all media from FP and Telomer Manufacturing | Dispersions (ppm wet-weight basis) |
Other Fluoropolymers (ppm dry-weight basis) | Telomers (ppm dry-weight basis, unless stated otherwise) |
|---|---|---|---|---|---|---|
Arkema |
PFOA and Higher Homologues |
>1,000 - 10,000 |
For FP Production: (> 0.1 - 1) kg / 100 kg | Not Applicable | >70 - 150 | Not Applicable |
Precursors |
Not Applicable | |||||
Asahi |
PFOA and Higher Homologues |
6,036 |
For FP Production: < 1 kg / 100 kg | 1,144 (< 30 - 2900) |
18 | Not Applicablec |
Precursors |
3,179 | For Telomer Production: < 1 kg / 100 kg |
Not Applicable | Not Applicable | Average 50% (range: 0-100%) |
|
Ciba |
PFOA |
30 kg (total for emissions and product content) |
||||
Higher Homologues |
34 kg (total for emissions and product content) |
|||||
Precursors |
1013 kg (total for emissions and product content) |
|||||
Clariant |
PFOA and PFOA Salts | 1 |
For Telomer Production: 3.0 x 10-5 kg / 100 kg |
Not Applicable | Not Applicable | 2 kg (total product content) |
Direct Precursors |
<5 | For Telomer Production: 1.0 x 10-4 kg / 100 kg |
Not Applicable | Not Applicable | 58 kg (total product content) |
|
Daikin |
PFOA |
CBI |
For FP Production: 0.026 kg / 100 kg |
480 |
120 |
0.31 (wet-weight basis) |
For Telomer Production: 5.2 x 10-6 kg / 100 kg |
||||||
Precursors and Higher Homologues |
CBI |
For Telomer Production: 0.021 kg / 100 kg |
Not Applicable |
Not Applicable |
2,300 (wet-weight basis) |
|
DuPont |
PFOA, PFOA Salts |
2,600 |
Not Reported |
775 |
0 ppb |
246 kg (global total product content in all product produced)d |
Direct Precursors (C8 Telomer A Iodide and the 8-2-8 Telomer B alcohol ester of PFOA)
|
Not Reported |
Not Reported |
Not Applicable |
Not Applicable |
57 kg (global total product content in all product produced) |
|
3M/Dyneon |
PFOA |
3,700 |
For FP Production: < 1 kg / 100 kg |
130 |
Not Applicable |
Not Applicable |
Solvay Solexis |
Not Applicable |
|||||
Table 3 - Reported Percent Reductions in Emissions and Product Content of PFOA, Precursors, and Higher Homologues from U. S. Operations (cumulative percent reductions from baseline year through end of 2006).
| Company | Chemical Category | % Reduction in Emissions % Reductions in total quantity of chemical(s) released from baseline year |
% Reduction in Product Contente | ||
|---|---|---|---|---|---|
| Dispersions (ppm wet-weight basis) | Other Fluoropolymers (ppm dry-weight basis) | Telomers (ppm dry-weight basis, unless stated otherwise) |
|||
Arkema |
PFOA and Higher Homologues |
22% |
0% | 30% | Not Applicable |
Precursors |
Not Applicable | ||||
Asahi |
PFOA, PFOA Salts, and Higher Homologues |
6% |
12% |
Not Applicablef |
Not Applicable |
Precursors |
Not Applicable | ||||
Ciba |
PFOA |
>99% (total for emissions and total mass of product present in the entire amount of product) |
|||
Higher Homologues |
>99% (total for emissions and total mass of product present in the entire amount of product) |
||||
Precursors |
>99% (total for emissions and total mass of product present in the entire amount of product) |
||||
Clariant |
Not Applicable | ||||
Daiking |
PFOA |
94% for fluoropolymer production 92% for telomer production |
34% |
0% |
72% |
Precursors and Higher Homologues |
22% for telomer production |
Not Applicable |
Not Applicable |
78% |
|
DuPont |
PFOA, PFOA Salts |
98% |
44% |
80% |
50% (total mass of chemical(s) that is present in the total amount of product produced in U.S. and non-U.S. sites) |
Precursors |
CBI |
Not Applicable |
Not Applicable |
14% (total mass of chemical(s) that is present in the total amount of product produced in U.S. and non-U.S. sites) |
|
3M/Dyneon |
PFOA |
100% |
100% |
Not Applicable |
Not Applicable |
Solvay Solexis |
PFOA and PFOA Salts |
Not Applicable |
59% |
Not Applicable |
Not Applicable |
Higher Homologues |
28% |
Not Applicable |
0% |
Not Applicable |
|
Precursors |
Not Applicable |
Not Applicable |
Not Applicable |
Not Applicable |
|
Table 4 - Reported Percent Reductions in Emissions and Product Content of PFOA, Precursors, and Higher Homologues from Non-U. S. Operations (cumulative percent reductions from baseline year through end of 2006)
| Company | Chemical Category | % Reduction in Emissions % Reductions in total quantity of chemical(s) released from baseline year |
% Reduction in Product Contenti | ||
|---|---|---|---|---|---|
| Dispersions (ppm wet-weight basis) | Other Fluoropolymers (ppm dry-weight basis) | Telomers | |||
Arkema |
PFOA and Higher Homologues |
CBI |
|||
Precursors |
Not Applicable | ||||
Asahi |
PFOA, PFOA Salts, and Higher Homologues |
39% |
23% |
Not Applicablei |
Not Applicablej |
Precursors |
20% |
Not Applicable |
Not Applicable |
18% |
|
Ciba |
PFOA |
94% |
|||
Higher Homologues |
91% |
||||
Precursors |
An increase of 131% |
||||
Clariant |
PFOA and PFOA Salts |
90% |
Not Applicable |
Not Applicable |
35% (total mass of chemical(s) that is present in the total amount of product produced) |
Direct Precursors |
0-10% |
Not Applicable |
Not Applicable |
40% (total mass of chemical(s) that is present in the total amount of product produced) |
|
Daikink |
PFOA |
90% for fluoropolymer production 39% for telomer production |
76% |
16% |
69% |
Precursors and Higher Homologues |
38% for telomer production |
Not Applicable |
Not Applicable |
78% |
|
DuPont |
PFOA, PFOA Salts |
86% |
25% |
100% |
50% (total mass of chemical(s) that is present in the total amount of product produced in U.S. and non-U.S. sites) |
Direct Precursors |
Not Reported |
Not Applicable |
Not Applicable |
14% (total mass of chemical(s) that is present in the total amount of product produced in U.S. and non-U.S. sites) |
|
3M/Dyneon |
PFOA |
74% |
91% (total mass) |
Not Applicable |
Not Applicable |
Solvay Solexis |
Not Applicable |
||||
a % reduction in emissions for Daikin is reported for reduction in ratios of (kg of release)/(kg of product content)
b Year-end run rates
c The quantity of PFOA, PFOA salts and higher homologues in telomer based products and other fluoropolymers that are produced in non-US operations was reported by Asahi as being negligible as compared to the quantity of precursors in those same products.
d Year-end run rates
e All values refer to reductions in the concentration of chemical(s) in the product except where noted that the reduction refers to the reduction in total mass of chemical(s) that is present in the total amount of product produced.
f The quantity of PFOA, PFOA salts and higher homologues in telomer based products and other fluoropolymers that are produced in non-US operations was reported by Asahi as being negligible as compared to the quantity of precursors in those same products.
g % reduction in emissions for Daikin is reported for reduction in ratios of (kg of release)/(kg of product content)
h All values refer to reductions in the concentration of chemical(s) in the product except where noted that the reduction refers to the reduction in total mass of chemical(s) that is present in the total amount of product produced.
i The quantity of PFOA, PFOA salts and higher homologues in telomer based products and other fluoropolymers that are produced in non-US operations was reported by Asahi as being negligible as compared to the quantity of precursors in those same products.
j The quantity of PFOA, PFOA salts and higher homologues in telomer based products and other fluoropolymers that are produced in non-US operations was reported by Asahi as being negligible as compared to the quantity of precursors in those same products.
k % reduction in emissions for Daikin is reported for reduction in ratios of (kg of release)/(kg of product content)
![[logo] US EPA](http://www.epa.gov/epafiles/images/logo_epaseal.gif)