![[logo] US EPA](http://www.epa.gov/epafiles/images/logo_epaseal.gif){kind=logo}
Effluent Guidelines
Iron and Steel
Regulations
Amendment
Final Amendment, Federal Register Notice (December 13, 2005)
- Fact Sheet: Final Amendments to the Effluent Limitations Guidelines for the Iron and Steel Manufacturing Point Source Category
Proposed Amendment, Federal Register Notice (August 10, 2005)
Final Rule
- Fact Sheet
- Federal Register Notice (October 17, 2002)
- Supporting Documents
- Development Document (EPA-821-R-02-004)
EPA's engineering methodology and technical conclusions concerning the Iron & Steel category. - Economic Analysis (EPA-821-R-02-006)
EPA's methodology for assessing economic impacts of the final rule and comparison with environmental impacts. - Environmental Assessment (PDF) (285 K; EPA-821-R-02-005)
EPA's methodology for estimating environmental impacts of the final rule.
- Development Document (EPA-821-R-02-004)
Note: EPA no longer updates this information, but it may be useful as a reference or resource.
Proposed Rule
- Fact Sheet
- Federal Register Notice announcing reopening of comment period on proposed rule (April 4, 2001)
- Federal Register Notice announcing corrections and extensions of comment period (February 14, 2001)
- Federal Register Notice (December 27, 2000; three parts)
- Supporting Documents
1982 Regulation
- Iron and Steel Manufacturing Point Source Category (40 CFR Part 420)
- Supporting Documents -- 1982
Find by document number at: National Service Center for Environmental Publications- 440182024: A Development Document for Effluent Limitations Guidelines and Standards for the Iron and Steel Manufacturing, Volume I
- 440182024B: Development Document for Effluent Limitations Guidelines and Standards for the Iron and Steel Manufacturing: Point Source Category, Volume II Coke Making Subcategory, Sintering Subcategory, Iron Making Subcategory
- 440182024C: Development Document for Effluent Limitations Guidelines and Standards for the Iron and Steel Manufacturing: Point Source Category, Volume 3, Steel Making Subcategory, Vacuum Degassing Subcategory, Continuous Casting Subcategory
- 440182024D: Development Document for Effluent Limitations Guidelines and Standards for the Iron and Steel Manufacturing: Point Source Category, Volume 4, Hot Foam Subcategory
- 440182024E: Development Document for Effluent Limitations Guidelines and Standards for the Iron and Steel Manufacturing: Point Source Category, Volume 5, Salt Bath Descaling Subcategory, Acid Pickling Subcategory
- 440182024F Development Document for Effluent Limitations Guidelines and Standards for the Iron and Steel Manufacturing: Point Source Category, Volume 6, Cold Forming Subcategory, Alkaline Cleaning Subcategory, Hot Coating Subcategory