Jump to main content.


Steps to Safe Renovation and Abatement of Buildings That Have PCB-Containing Caulk

Overview

picture of building

This information is designed to assist building owners and abatement contractors who may be handling PCB-containing or PCB-contaminated building materials during planned renovation or repair activities or planned PCB abatement efforts in older buildings. The following pages include information on:

Top of Page

Disclaimer

Regardless of the size of a project involving potentially contaminated building materials, contractors and building owners should be especially aware of the impact of their work in buildings occupied by high-risk populations, such as schools and daycare centers. The information provided in this document is intended solely for guidance and does not replace or supplant the requirements of the Toxic Substances Control Act (TSCA) or the PCB regulations at 40 CFR Part 761. Those responsible for renovation, repair, or abatement activities of potential PCB-containing or PCB-contaminated materials should review and understand the regulatory requirements, and are encouraged to consult the EPA or environmental professionals experienced with PCB cleanup activities. This document does not impose requirements or obligations on EPA or the public. The use of the word "should" in this document reflects an EPA recommendation, not a requirement.

In addition to the PCB regulations under TSCA, renovators and abatement personnel should also be aware that their activities may also disturb asbestos-containing materials and/or lead-based paint. Read more about EPA's regulations and guidance for lead-based paint and asbestos. The Occupational Safety and Health Administration (OSHA) also has standards and guidance on the hazards of lead and asbestos specifically for workers and employers.

The use of the term "caulk" in this document refers to any building joint, window, or door sealer or filler found on the inside or outside of a building.

Top of Page

Example Decision Flowchart for Classifying Suspect Building Materials

This flowchart (PDF) (1 pp, 32K, About PDF) can be used to help navigate through the information on this site.

Steps to Safe Renovation Flow Chart See Disposal Section See Abatement Section See Testing and Characterization Section Maximum Concentrations PDF See Abatement Section See Renovation and Repair Section See Abatement Section See Disposal Section

Note:

Next page: Facts About PCBs in Caulk

Top of Page


Local Navigation


Jump to main content.