Production Components Corporation
(Formerly Eaton Laboratories, Inc.)
On This Page
EPA Project Manager
Jeanna R. Henry
U.S. Environmental Protection Agency - Region III
1650 Arch Street
Mail code: 3LC30
Philadelphia, PA 19103-2029
EPA sets national goals to measure progress toward meeting the nation’s major environmental goals. For Corrective Action, EPA evaluates two key environmental indicators for each facility: (1) current human exposures under control and (2) migration of contaminated groundwater under control. On June 2, 2011, Michael Jr. Baker, Inc. (Baker) conducted an Environmental Indicator (EI) Inspection of Production Components Corporation (PCC or Facility), on behalf of EPA. A representative from the EPA was present for the EI Inspection. The findings of the EI Inspection are documented in a November 2011 EI Inspection Report for PCC, prepared by Baker. Also presented in the EI Inspection Report is a summary of the information reviewed by Baker in preparation for the EI Inspection, including records maintained by the Pennsylvania Department of Environmental Protection (PADEP) and EPA. Based on a review of the information presented in the EI Inspection Report, EPA determined that the Facility met both of these indicators on April 19, 2012.
EPA’s review of available information indicates that there are no unaddressed releases of hazardous waste or hazardous constituents from the Facility. On August 7, 2012, EPA announced its proposed decision of Corrective Action Complete without Controls under the Resource Conservation and Recovery Act (RCRA), as amended, for PCC. Consistent with public participation provisions under RCRA, EPA requested comments from the public on the proposed remedy as described in the July 19, 2012 Statement of Basis (SB). The commencement of a thirty (30) day public comment period was announced in The Reporter newspaper on August 7, 2012 and on the EPA Region III website. The public comment period ended on September 5, 2012.
On September 7, 2012, EPA approved its final remedy decision for PCC in a document entitled the Final Decision and Response to Comments (FDRTC). EPA received no comments on the proposed decision. Consequently, EPA’s final determination is unchanged from the proposal. EPA has determined that its final decision is protective of human health and the environment and that no further corrective action or land use controls are necessary at this time.
The Facility is located in Lansdale Borough, Montgomery County, Pennsylvania in an industrial/commercial area. Two separate Buildings (Building 1 and Building 2) are located on the 3.7 acre property. Building 1 is located on West Fifth Street and is approximately 80,000 square feet and is divided into three separate suites. PCC currently leases the northwest suite. The southeast suite is occupied by Handelok Bag Company, and the remaining space is unoccupied. Building 2 is located on Mitchell Avenue directly north of Building 1. Building 2 is approximately 21,000 square feet and is divided into two separate suites: one approximately 12,000 square feet and the other approximately 9,000 square feet. PCC occupies the 12,000 square feet suite and the smaller 9,000 square feet is occupied by Service Tire and Truck Center.
PCC provides precision sheet metals services and uses conventional and computer controlled fabrication equipment to manufacture a variety of panels, enclosures, covers, frames, brackets, and cabinets. Materials for fabrication include steel, stainless steel, aluminum, and various other alloys. PCC also provides paint and powder coat finishing. PCC’s administrative areas, as well as the sheet metal fabrication operations are located in Building 1. The Facility’s paint line and phosphate cleaning system are located in Building 2. PCC leases the Facility from 701 West Associates LLC.
In 1978, Eaton Laboratories, Inc. (Eaton) first leased and operated out of the 25,000 square foot suite in the northwest end of Building 1. Eaton was a manufacturer of textile chemicals, dry cleaning auxiliary chemicals, and maintenance chemicals (detergents and cleaners). In 1981, PCC was founded and initially leased and operated out of the 9,000 square foot suite located on the southwest end of Building 2 before expanding into the 12,000 square feet suite. In 1990, PCC again expanded its operations, moving into the 25,000 square feet suite in Building 1 formerly occupied by Eaton.
The Eaton facility was listed as one of 26 potentially responsible parties (PRPs) for the North Penn Area 6 Superfund Site: named such because it affects the North Penn Water Authority (NPWA) wells that supply drinking to most of the people living northwest of Philadelphia. The North Penn Area 6 Superfund Site was added to the National Priorities List (NPL) on March 31, 1989. As part of a 1991 Phase II RI/FS Focused Feasibility Study, soil samples were collected from the Eaton property. Based on the results of the soil sampling, Eaton was not identified as a PRP that was held liable for the soil and groundwater remediation in the area.
For more information regarding the North Penn Area 6 Superfund Site, please visit: http://www.epa.gov/reg3hwmd/super/sites/PAD980926976/index.htm
- Some of the site’s key documents of interest are accessible below:
- Corrective Action Statement of Basis [PDF, 12 pages, 3878 KB, About PDF ]
- Environmental Indicator Determination - Human Exposures [PDF, 10 pages, 4842 KB, About PDF ]
- Environmental Indicator Determination - Groundwater [PDF, 10 pages, 4486 KB, About PDF ]
- Documents and reports regarding this facility also can be reviewed in person at these locations:
U.S. EPA Region III
Land & Chemicals Division
1650 Arch Street-11th Floor
Philadelphia, PA 19103
Call for an appointment.
- Submit a FOIA Request
Get instructions on how to submit a FOIA request. Additional fee for requests over 100 pages.
|Production Components Corp Site Map[PDF, 1 pages, 551 KB, About PDF ]||Production Components Facility Layout[PDF, 1 pages, 708 KB, About PDF ]|
Click on a thumbnail to enlarge the photo)
The site is under continued use.
- The EPA is dedicated to providing you with timely and accurate information about our work at this site. If you have any questions or concerns, please contact EPA Project Manager: Jeanna R. Henry (215)814-2820.