Jamestown Powder Coatings
(Beaver Paint Co.)
On This Page
- Corrective Action Status:
Corrective Action Underway
- Human Exposure Controlled: TBA
- Ground Water Controlled: TBA
EPA is currently reviewing the existing environmental information to determine if further investigation and/or corrective action will be required at the site. EPA will first focus on the health and groundwater impacts, if any, presented by the facility. Once EPA completes this review process, an environmental indicator determination will be prepared and posted to this website.
Beaver Paint began manufacturing industrial paint coatings in 1966. Operations ceased at the Girard plant in 2002 and the liquid paint operations moved to Jamestown, PA. Jamestown Powder Coatings was purchased in 2002 and moved to the Girard location in November 2005. These new operations do not generate any hazardous waste.
During the time Beaver Paint was in operation, they generated solvent and ignitable wastes and wastewaters. These wastes and wastewaters were sent off-site for treatment. No spills were reported during this time.
- Some of the site’s key documents of interest are accessible below:
- Corrective Action Factsheet e[PDF, 8 pages, 26 KB, About PDF]
- Documents and reports regarding this facility also can be reviewed in person at these locations:
U.S. EPA Region III
Land & Chemicals Division
1650 Arch Street-11th Floor
Philadelphia, PA 19103
Call for an appointment.
- Submit a FOIA Request
Get instructions on how to submit a FOIA request. Additional fee for requests over 100 pages.
|Jamestown Powder Coatings|
The site is under continued use.
For more information about EPA’s corrective action webpage, including Environmental Indicators, please visit our site at: www.epa.gov/reg3wcmd/correctiveaction.htm