Solvay Specialty Polymers USA LLC
Other (Former) Names of Site - Solvey Solexis, Inc., Ausimont USA Incorporated, National Steel Company (Pennwalt)
|EPA Identification Number:||NJD980753875|
|Facility Location:||10 Leonard Lane, Thorofare, New Jersey 08086|
|Facility Contact:||Facility Contact: Mitch Gertz: (856) 251-6630|
|EPA Contact:||Andy Park, 212-637-4184, firstname.lastname@example.org|
|New Jersey Department of Environmental Protection (NJDEP) Case Manager:||Loren Lasky, Loren.Lasky@dep.state.nj.us|
|Last Updated:||May 2013|
|Environmental Indicator Status:||Human Exposures Under Control [PDF 771.40 KB, 40 pp] has been verified.
Groundwater Contamination Under Control: No status has been reported.
The site is located at 10 Leonard Lane, in West Deptford Township, New Jersey, in a mostly industrial setting surrounded by a rural residential area. Pennwalt began operations in the 1970s manufacturing fluorocarbons but the operations ceased in 1977. New operations began in 1985, manufacturing vinylidene fluoride monomers, fluoropolymers and fluorocarbons. The site was sold to Elf Atochem in 1989, subsequently to Ausimont USA, Inc. in 1990, and then to the Solvay Group in 2002. Currently, fluoropolymers, fluorocarbons and fluoroelastomers are manufactured. The operation generates hazardous wastes that are managed under a permit from New Jersey Department of Environmental Protection (NJDEP) for on-site hazardous waste storage and incineration.
Potential Threats and Contaminants
Groundwater and soil contamination at the site resulted from plant operations and management of wastes. Key groundwater contaminants include 111, trichloroethane (and its degradation products, 1,1 dichloroethane, 1,1 dichlorethene), and carbon tetrachloride and its degradation product, chloroform. Metals in groundwater include iron, manganese and aluminum. Soils contamination is below NJDEP direct contact standards for volatile organic compounds. Metals in soil include antimony and nickel.
Cleanup Approach and Progress
From 1990 to 1992, soil contamination was cleaned up via excavation and offsite disposal at a waste disposal facility, followed by backfilling of the excavated areas with clean soil.
In 2004, Solvay installed a soil cap at the dredge spoils area on the site’s northern section, which is located outside the manufacturing area. In 2005, Solvay replaced underground process piping with double walled piping to prevent leaks. In April of 2010, Solvay began operation of a groundwater pump and treat system to provide onsite treatment and hydraulic containment of the plume. The treated groundwater is reused in the manufacturing process.
Solvay Specialty Polymers USA LLC is currently investigating the groundwater contamination at the site to determine how far it may extend. The investigation needs to be completed to define the hydrogeology and groundwater contamination and is primarily focused off-site. An appropriate final remedy will be selected based on the contaminant concentration levels, the rate at which the contaminated groundwater is moving and the distance the plume of contaminated water has migrated. Institutional controls (e.g., a Deed Notice for residual soil contamination and a Classification Exception Area for any remaining groundwater contamination) will be imposed at areas with residual contamination. A long-term groundwater monitoring system will be developed to ensure that the groundwater contamination continues to be contained.
Final Cleanup Status or Projection
- Final Remedy Construction (RCRAInfo database code CA550) has not been achieved.
Copies of supporting technical documents and correspondence cited in the site fact sheet are available for public review at the following location:
New Jersey Department of Environmental Protection
Division of Solid & Hazardous Waste
401 E. State Street, 6th Floor
Trenton, NJ 08625
Telephone: (609) 777-3373