Jump to main content.


Construction and Demolition (C&D) Debris

Construction & Demolition in the Southeast

Construction and Demolition (C&D) debris is a large, valuable and variable part of the waste stream. C&D materials include; wood, wire, concrete, aggregate, metals, wall board and ceiling tiles. Many of these materials can be reused or recycled. Road and bridge construction materials are also components of the C&D stream. This Web site will, however, focus on waste materials generated during the construction and demolition of residential and commercial structures.

As a result of strong growth in the Southeast, many public and private sector groups recognize C&D recycling as a valuable part of cost efficient renovation and construction. These groups, including EPA, are working to increase the recovery of C&D materials to reduce environmental impacts and promote economic benefits.

Double Bracket: C&D Recycling Highlight    With proper planning, the North Carolina Department of Environment and Natural Resources saved roughly $359,000 by recycling 98.8 percent of C&D materials created during the demolition of two state-owned buildings in Raleigh, North Carolina.    C&D material recycling can be adopted at many stages of a project. It can start by directly salvaging usable materials from a job site, or by adding clearly marked containers for easily recyclable material such as metals. Programs can be expanded to highly-mechanized facilities that sort, grind and prepare mixed loads of C&D materials. Unlike municipal solid waste which may travel long distances for disposal, C&D material management tends to be local with a tie to the regional economy.

Studies about the generation of C&D materials in the Southeast are limited. The best available data suggest that annual generation of C&D materials in the Southeast likely exceeds 20 million tons – almost 700 pounds per person per year. Disposal costs for these materials could exceed $600 million dollars.

Locally, the quantities vary greatly based on economic conditions and other factors such as natural disasters. In urban areas experiencing construction and economic expansion, C&D materials may account for more than 40 percent of the waste stream. The percentage of C&D may drop to less than 20 percent in rural areas.

For more specific information on state requirements and programs for C&D debris management, see EPA Region 4 State Links. For more information on C&D debris management in Region 4, contact:

Steve Smith
U.S. EPA Region 4
Solid Waste Program
61 Forsyth Street, S.W.
Atlanta, Georgia 30303-8960
Phone: (404) 562-8501
E-mail: smith.steved@epa.gov

Some of the documents on this Web page are in PDF format. For information about PDFs, please click on the link provided. Adobe PDF files


Local Navigation


Jump to main content.