Public Availability Session to Discuss Vapor Intrusion Risks at the Highway 3 PCE Site, Le Mars, Plymouth County, Iowa
The U.S. Environmental Protection Agency (EPA) will hold a Public Availability Session to discuss known groundwater contamination and EPA’s planned vapor intrusion sampling, focusing on the risks of vapor intrusion and indoor mitigation techniques.
EPA plans to host a Public Availability Session at the City Council Chambers in Le Mars, Iowa.
A short presentation will begin at 7:00 p.m. to discuss planned sampling and vapor intrusion risks. In addition to discussing vapor intrusion risks, informational fact sheets will be available, as well as health experts to discuss possible health risks as a result of PCE exposure.
The Public Availability Session will be held:
Tuesday, December 10, 2013
7:00 – 9:00 p.m.
City Council Chambers
40 Central Avenue SE
Le Mars, Iowa
EPA Region 7 is committed to providing reasonable accommodation to individuals with disabilities. If you require a reasonable accommodation to participate in the meeting, please notify the EPA Reasonable Accommodations Coordinator, Jonathan Cooper, at 800-223-0425 or firstname.lastname@example.org. Speech or hearing impaired individuals should email or call using the local relay service.
The Highway 3 PCE Site includes, but is not limited to, a plume of tetrachloroethene (PCE) first detected during an April 2008, Le Mars Coal Gas Plant site investigation. Subsequently, EPA completed two groundwater sampling events, which assisted in a broader site investigation to define the extent of the PCE plume, and trace back the migration pathway to the potential source areas.
The first phase of the investigation is in the area defined by Plymouth Street (Iowa Highway 3) to the north, Central Street to the west, and Lincoln Street Southeast (SE). Later phases included groundwater sampling several blocks to the northwest of this location.
ABOUT THE CONTAMINATION
Tetrachloroethylene (PCE) is the contaminant of concern. PCE is a chlorinated hydrocarbon solvent. PCE is commonly used in dry-cleaning fluid, spot removers, and degreasers.
If you have questions or need additional information, please contact:
Community Involvement Coordinator
EPA Region 7
Office of Public Affairs
11201 Renner Blvd.
Lenexa, KS 66219