Jump to main content.


Risk Management Program Information

Slide Presentation: RMP Introduction, Applicability, Program Levels, and Common Deficiencies Overview (PDF) (42 pp, 1.16MB, About PDF) This presentation is the first of eight slideshows prepared by EPA Region 7 for RMP facilities, and provides a basic overview of the Risk Management Program as required under CAA 112(r).

Slide Presentation: Occupational Safety and Health Administration (OSHA) Process Safety Management (PSM) Overview (PDF) (11 pp, 375K, About PDF) This presentation is the second of eight slideshows prepared by EPA Region 7 for RMP facilities, and provides a brief overview of OSHA’s Process Safety Management standard [29 Code of Federal Regulations (CFR) 1910.119] and how it correlates to EPA’s Risk Management Program.

Slide Presentation: Offsite Consequences Analysis Overview (PDF) (19 pp, 763K, About PDF) This presentation is the third of eight slideshows prepared by EPA Region 7 for RMP facilities, and provides a brief overview of hazard assessment required for risk management programs.

Slide Presentation: Five-Year Accident History Overview (PDF) (14 pp, 697K, About PDF) This presentation is the fourth of eight slideshows prepared by EPA Region 7 for RMP facilities, and provides a brief overview of five-year history requirements under CAA 112(r).

Slide Presentation: Prevention Program Overview (PDF) (107 pp, 2.04MB, About PDF) This presentation is the fifth of eight slideshows prepared by EPA Region 7 for RMP facilities, and provides a detailed overview of Prevention Programs for Program 2 and 3 facilities, including safety management, hazard review, operating procedures, training, compliance audits, incident investigation, common deficiencies, and more.

Slide Presentation: CAA 112(r)Emergency Response Program Overview (PDF) (34 pp, 760K, About PDF) This presentation is the sixth of eight slideshows prepared by EPA Region 7 for RMP facilities, and provides an overview of Emergency Response Programs for both responding and non-responding facilities, including how to determine which category a facility falls within.

Slide Presentation: RMPs, Updates, and RMP*eSubmit Overview (PDF) (24 pp, 424K, About PDF) This presentation is the seventh of eight slideshows prepared by EPA Region 7 for RMP facilities, and provides an overview of RMP reporting requirements, when to update, and how to submit using the new web-based system, RMP*eSubmit.

Slide Presentation: CAA 112(r) Inspections Overview (PDF) (12 pp, 302K, About PDF) This presentation is the last of eight slideshows prepared by EPA Region 7 for RMP facilities, and provides an overview of what facilities can expect before, during, and after an EPA RMP inspection, including what will be inspected and EPA’s self-disclosure audit policy.

Guide to the Accidental Release Prevention Requirements [Section 112(r) of the Clean Air Act] (PDF) (38 pp, 494K, About PDF) Includes the List Rule Fact Sheet, RMP Final Rule Fact Sheet, List of Regulated Substances and Thresholds, CAA 112(r) Frequently Asked Questions, Threshold Determination for Toxics, Threshold Determination for Toxics flowchart, Threshold Determination for Flammables flowchart, Program Level Requirements, 40 CFR Part 68, Subpart G – Risk Management Planning, One-Plan Announcement, and References for Additional Information.

Slide Presentation: Risk Management Program (RMP) (PDF) (136 pp, 217K, About PDF) These are the slides that were used in the EPA Region 7 training course for the 2009 RMP Program mandated by Section 112(r) of the Clean Air Act.

RMP*Comp This is an electronic tool used to perform the off-site consequence analysis required under the Risk Management Program Rule published by EPA on July 20, 1996, which implements Section 112(r) of the Clean Air Act. Previously, EPA has referred to this tool as RMP Calculator or RMP Assistant. We are making RMP*Comp available to you in draft form to help you with your initial Risk Management Program planning and evaluation. You can download an electronic copy from the RMP*Comp Web page.

Would your business or organization like to request outreach materials or services?

Contact Steve Wurtz, Environmental Protection Specialist, EPA Region 7, at (913) 551-7315


Local Navigation


Jump to main content.