Jump to main content.


Data Validation Standard Operating Procedures for Chlorinated Dioxin/Furan Analysis by High Resolution Gas Chromatography/High Resolution Mass Spectrometry
Revision 7.0
March 2014

US-EPA, Region 4, SESD, Athens, Georgia

The objective of this Standard Operating Procedure (SOP) is to assist in the technical review of chlorinated dibenzo-p-dioxin (CDD) and chlorinated dibenzofuran (CDF) analytical data. This SOP is applicable to CDD/CDF data collected from environmental sample matrices using a high resolution gas chromatograph and high resolution mass spectrometry (HRGC/HRMS) method.

  This document is available here for downloading and viewing.
It is contained in files formatted using
Adobe's Portable Document Format (PDF) NOTE: In an effort to make our information accessible to all members of the community,
the layout and content of this web page has been modified 
to comply with Section 508 of the Americans with Disabilities Act. 
However, due to the technical nature of  many of these documents, especially those 
in Acrobat PDF format, they may not always read properly when using assistive technology.

If you need additional information or assistance with this document,
contact Jeffrey Hendel at (706) 355-8839
or Nancy Seabolt at (706) 355-8687
or via email at Hendel.Jeffrey@epa.gov or Seabolt.Nancy@epa.gov

Disclaimers

Data Validation SOP for PCDD/PCDF
The following document is in Acrobat PDF format. It contains59 pages and its size is 318 KiloBytes Download SOP

For further information about the contents of this page please contact R4SESDWeb@epa.gov


Local Navigation


Jump to main content.