Jump to main content.


EDD: Basic Data Submission Information

This Web page was developed to provide data providers with information on how to prepare data submittals, when some information about data collected in the past may not be available.

The intent of developing special requirements for historical information is to decrease the burden associated with reporting in-depth details about data that may have been collected a number of years ago. EPA recognizes that some information about data collected in the past may not be readily available and, by reducing the requirements for electronic historical data, is endeavoring to strike a balance between minimizing the amount of effort involved in providing information and maximizing the ability to document remedy progress.

Prior to using the "Basic Electronic Data Deliverable Specification" data format, data providers should contact Region 5 through the GEOS EDD support e-mail (geoseddsupport@epa.gov).

Below is a link for the Basic Electronic Data Deliverable Specification Manual which gives data providers substantial detailed information regarding the preparation of Basic EDD files.

Basic Electronic Data Deliverable Specification Manual Version 2.0. Any updates to this manual since publication can be found here.

Furthermore, data providers can use the Region 5 Electronic Data Templates while preparing data for submittal.

Valid Value Information

Below is the list of valid values as published in the Superfund Electronic Data Deliverable Specification Manuals (Version 2.0). These values have been verified and approved for data provider use by EPA Region 5. Please print this list, as it will be used often throughout the EDD preparation process.

EPA Region 5 Valid Values [Appendix to Electronic Data deliverable Specification Manuals]

VALID VALUE UPDATES (08/01/08)

New valid values are added frequently. A link to those updates is provided here, as well as on the GEOS homepage for future convenience.

Is Your Valid Value Not Listed?

If a lab has provided you with a valid value that is generating errors in data checker software, please e-mail a Valid Value Addition Request to GEOS EDD support (geoseddsupport@epa.gov).


Local Navigation


Jump to main content.