OBODM Version 01.3.0021

This version corrects a bug that did not allow the user to change some of the
meteorological data lower and upper limit values.


*************************************************************************


To install the OBODM program:

1) Go to the DOS prompt
2) Change to the drive letter of your 3.5" floppy, normally A:
3) Insert the OBODM install disk and type

   INSTALL [source] [destination]
   Where:
      [source] is the pathname to the file OBOD1321.EXE
      [destination] is the drive where you want the OBODM directory placed.

For example, if the OBODM install disk is on drive A: (3.5" disk) and you
want the OBODM program on drive C:, then type:

   INSTALL A: C:

The INSTALL program will create the OBODM directory on drive C: and unpack
the OBODM program, database files and examples into this directory.

If you desire a different named directory, then create the desired directory,
on the desired drive and copy OBOD1321.EXE from the 3.5" floppy to the
desired directory and then type:

   OBOD1321.EXE

OBOD1321.EXE is a self-extracting file that will unpack the OBODM program
and related files.  OBOD1321.EXE can then be deleted from this directory
to conserve space.

If you get the message "Authenticity Verification Failed!", then the files
have been tampered with or are corrupt.  Delete the newly installed files and
obtain a new copy of the OBOD1321.EXE self-extracting file.

IF you get the message "Authentic files Verified!" or no message, the
installed files are ok.

This version (1.3.0021) requires 515K bytes of lower memory.  If your manual
gives a lower number, revise it.