TOPSALL #30
Quickfinder
TECHNICAL PRODUCT BULLETIN #SW-2 (formerly #D-20)
USEPA, OIL PROGRAM CENTER
ORIGINAL LISTING DATE: JANUARY 7, 1985
REVISED LISTING DATE: AUGUST 21, 1995
"TOPSALL #30"
(a/k/a SUPERALL #38)
USEPA, OIL PROGRAM CENTER
ORIGINAL LISTING DATE: JANUARY 7, 1985
REVISED LISTING DATE: AUGUST 21, 1995
"TOPSALL #30"
(a/k/a SUPERALL #38)
| I. NAME, BRAND, OR TRADEMARK |
|
Topsall #30 (a/k/a SUPERALL #38) Type of Product: Surface Washing Agent (Oil and Petroleum Cleaning Agent) |
| II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT |
| TOPSALL#30 Stutton North Corporation P.O. Box 724 Mandeville, LA 70470 Phone: (985) 626-3900 Fax: (985) 674-0476 (Mr. David Anton) SUPERALL #38 Superall Products LLP 22215 Tuwa Rd. Tomball, TX 77375 Phone: (281) 351-4800 Fax: (281) 351-4855 (Mr. Sammy Roberts) |
| III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS |
| TOPSALL#30 Stutton North Corporation P.O. Box 724 Mandeville, LA 70470 Phone: (985) 626-3900 Fax: (985) 674-0476 (Mr. David Anton) SUPERALL #38 Superall Environmental LLC 22215 Tuwa Rd. Tomball, TX 77375 Phone: (281) 351-4800 Fax: (281) 351-4855 (Mr. Sammy Roberts) |
| IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION |
|
1. Flammability: TOPSALL #30 (a/k/a SUPERALL #38) is non-flammable 2. Ventilation: Normal type household ventilation is adequate for handling and storage. 3. Skin and eye contact; protective clothing; treatment in case of contact: In case of contact with eyes, wash thoroughly with large amounts of water. If irritation persists, seek medical attention. Use protective gloves for manual cleaning. 4.a. Maximum storage temperature: 120ºF 4.b. Minimum storage temperature: 20ºF 4.c. Optimum storage temperature range: 40ºF to 100ºF 4.d. Temperatures of phase separations and chemical changes: TOPSALL #30 (a/k/a SUPERALL #38) has a pour point of 20ºF and a boiling point of 212ºF. |
| V. SHELF LIFE |
| TOPSALL #30 (a/k/a SUPERALL #38) has a shelf life of not less than two years. |
| VI. RECOMMENDED APPLICATION PROCEDURE | ||||||||||||||||||
|
1. Application Method: For general use, apply by spray, mop, etc. Agitate severe spots and rinse thoroughly for a residue-free surface. 2. Concentration/Application Rate: Dilute as noted below: DILUTION TABLE
*Rigs and platforms, bilges, decks, waterline scum, shop machinery and equipment. **Degasing tanks and barges, engine rooms and soot, oil stained concrete, petroleum based drilling muds. ***Black magic, Bunker C, crude oil, holding tanks, grease traps. DO NOT USE UNDILUTED ON COMPOSITION FLOORS, WATER BASE PAINTED SURFACES, OR ALUMINUM. 3.Conditions for Use: Recommended for cleaning petroleum fractions from decks, platforms, bilges, rigs, and other seagoing equipment, as noted above. |
| VII.TOXICITY AND EFFECTIVENESS | |||||||||||||||||||
a. Toxicity:
b. Effectiveness: NA |
| VIII. MICROBIOLOGICAL ANALYSIS |
| NA |
| IX. PHYSICAL PROPERTIES |
|
1. Flash Point: > 212ºF 2. Pour Point: 20ºF 3. Viscosity: 30.53 SUS at 100ºF 4. Specific Gravity: 1.06 at 70ºF 5. pH: 12.6 6. Surface Active Agents: CONFIDENTIAL 7. Solvents: None 8. Additives: CONFIDENTIAL 9. Solubility: Miscible with water |
| X. ANALYSIS FOR HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS | ||||||||||||||||||||||||||
|
![[logo] US EPA](http://www.epa.gov/epafiles/images/logo_epaseal.gif)
