![[logo] US EPA](http://www.epa.gov/epafiles/images/logo_epaseal.gif){kind=logo}
Implementation Information for the Surface Coating MACTs - Common files
NOTICE: This page provides information that may be useful across all surface coating rules.
Back to Main Common File List
Links to Other Rules
Important: This is an experimental page that continues to be updated and improved. The page attempts to identify multi-media Federal regulations that may be applicable to surface coating facilities. We have tried to make this webpage as inclusive as possible but not all applicable regulations may be listed here.Rules listed below link to EPA webpages or other references that contain information about the topic area. If you know of a common regulation that is missing from here but may apply to surface coating operations, please contact Ingrid Ward, ward.ingrid@epa.gov.
Air
Compliance Assurance
OECA Compliance Assurance PageCompliance Assurance Monitoring
Compliance Certification Rules
Periodic Monitoring Rule
Delisting Updates
HAP and VOC Delisting RulesOther MACT Program Regulations
General ProvisionsHalogenated Solvent Degreasing
Industrial/Commercial/Institutional Boilers and Process Heaters
Miscellaneous Organic Chemical NESHAP
Miscellaneous Coating Manufacturing
Printing & Publishing
Technical Support Document for Printers and Publishers - Pending
Secondary Aluminum
NAAQS
NAAQS Ozone Non-Attainment RedesignationsNational VOC Emission Standards for Consumer & Commercial Products
Other Air Toxics
112j MACT HammerConsumer and Commercial Products - Architectural Coatings, Automobile Refinish Coatings, Consumer Products-183(e) Rules
New Source Review (NSR)
Ozone/Chloroflorocarbon (CFC) Program
Potential To Emit (PTE)
Residual Risk
RCRA
Toxic Release Inventory (Lead Compound Reporting)Solvent Contaminated Wipes
TOSCA
Lead Paint
Water Issues
Spill Prevention, Control and Countermeasure Plans (SPCC)Miscellaneous
8/31/01 Establishment of Electronic Reporting; Electronic Records2/12/99 Recordkeeping and Reporting Burden Reduction
Safety and Health
Wall Paint Exposure Assessment Model (WPEM) - estimates the potential exposure of consumers and workers to the chemicals emitted from wall paint which is applied using a roller or a brush.NIOSH - Recommendations for Control of Occupational Safety and Health Hazards for Manufacture of Paint and Allied Coating Products (NIOSH 84-115, 9/84)
OSHA - Safety and Health Topics: Spray Operations
eLCOSH - Electronic Library of Construction Occupational Safety and Health.
NOTE: Links on this page may be pointers to other hosts and locations in the Internet.
This information is provided as a service; however the U.S. Environmental
Protection Agency does not endorse, approve or otherwise support these sites.