Jump to main content.

Announcement of Telephone Conference



                           U. S. ENVIRONMENTAL PROTECTION AGENCY
                                  
                        OFFICE OF AIR QUALITY PLANNING & STANDARDS
                                  
                               EMISSION STANDARDS DIVISION
                                  
                             RESEARCH TRIANGLE PARK, NC 27711
                                  
                                  
                             
                                            COVER SHEET
                                  
                                  

DATE: May 25, 1999


TO:  Metal Coil Coating PMACT/MACT Stakeholders (Fax distribution list attached)


FROM:  Rhea Jones, EPA/OAQPS/ESD/CCPG 


VOICE PHONE: 919-541-2940  FAX PHONE: 919-541-5689


E-MAIL: jones.rhea@epa.gov


OFFICE: U.S. ENVIRONMENTAL PROTECTION AGENCY

OFFICE OF AIR QUALITY PLANNING & STANDARDS

EMISSION STANDARDS DIVISION

RESEARCH TRIANGLE PARK, NC 27711

                                   
SUBJECT:       Announcement of Telephone Conference

     A telephone conference to discuss issues related to development of the metal coil coating
MACT standard is scheduled for Monday, June 7, 1999, starting at 2:00 pm EDT.  The telephone
conference is anticipated to last 2 hours, although the telephone line has been reserved for 3 hours. 
The call-in number is (404) 681-1211; when prompted for a pass code, dial 2344 then #.  Please wait
until 2:00 pm to dial in. The purposes of the telephone conference are the following:

     Review  NCCA documentation presenting an initial analysis of ICR data and MACT floor
     proposal

     Discuss the use of compliance options from the printing and publishing MACT in the metal coil
     surface coating MACT 

     Discuss potential requirements for ancillary HAP emission sources (i.e., storage tanks, wet
     section operations, mixing, thinning, intermix, and blending; parts and equipment cleaning;
     quenching; and wastewater operations) in the MACT standard

     Discuss the exclusion of area sources from the MACT floor analysis

     Review draft EPA model plants (metal coil surface coating lines) that will be used to estimate
     impacts of regulatory options 

     Please contact Mr. Stephen York of Research Triangle Institute (RTI) by June 1 by telephone at (919) 990-8629, or by E-mail at sby@rti.org if you plan to participate.  If you have any questions regarding the meeting, please contact me by telephone at (919) 541-2940 or by E-mail at jones.rhea@epa.gov.

Local Navigation

Jump to main content.