Jump to main content.


Conditional Test Methods

 


Go to Explanation of File Type Icons

File Description

File Name

Posting Date

File Types

Butadiene Method CTM-001.WPD 4-27-98
Butadiene Method (PDF format) CTM-001.PDF 4-27-98
Particulate (PM Screening) Method. CTM-002.WPD 4-27-98
Particulate (PM Screening) Method (PDF format). CTM-002.PDF 4-27-98
Particulate (PM Screening) Figure. CTM02FIG.WPD 4-27-98
Particulate (PM Screening) Figure (PDF format). CTM02FIG.PDF 4-27-98
Particulate (PM Modified High Vol.) Method. CTM-003.WPD 4-27-98
Particulate (PM Modified High Vol.) Method (PDF format). CTM-003.PDF 4-27-98
Conditional Test Method for Acrylonitrile. (PDF format). CTM-008.PDF 4-27-98
CTM-010 Figure 2 (Freelance). CTM010F2.PRE 4-27-98
CTM-010 Figure 1 (Freelance). CTM010F1.PRE 4-27-98
Perchloroethylene in Wet Waste (Filters and Still Bottoms). CTM-010.WPD 4-27-98
Perchloroethylene in Wet Waste (Filters and Still Bottoms) (PDF format). CTM-010.PDF 4-27-98
Halogenated Organics Method. CTM-011.WPD 4-27-98
Halogenated Organics Method (PDF format). CTM-011.PDF 4-27-98
Determination of Sulfuric Acid Vapor or Mist and Sulfur Dioxide Emissions from Kraft Recovery Furnaces CTM-013.PDF
Determination of Sulfuric Acid and Sulfur Dioxide Emissions from Combination Fuel Boilers and Recovery Furnaces CTM-013A.PDF
Determination of Sulfuric Acid and Sulfur Dioxide Emissions from Combination Boilers, Recovery Furnaces, and Thermal Oxidizers - Isokinetic Method CTM-013B.PDF
Benzene Matter Emissions. CTM-014.WPD 4-27-98
Benzene Matter Emissions (PDF format). CTM-014.PDF 4-27-98
Gas Velocity and Volumetric Flowrate under Cyclonic Flow Conditions. CTM-019.WPD 4-27-98
Gas Velocity and Volumetric Flowrate under Cyclonic Flow Conditions (PDF format). CTM-019.PDF 4-27-98
Nitric Oxide, Nitrogen Dioxide, & NOx emissions by Electrochemical Analyzer. CTM-022.WPD 4-27-98
Nitric Oxide, Nitrogen Dioxide, & NOx emissions by Electrochemical Analyzer (PDF format). CTM-022.PDF 4-27-98
Microbial Survivability Test for Medical Waste Incinerator Ash. CTM-025.WPD 4-27-98
Microbial Survivability Test for Medical Waste Incinerator Ash. (PDF format). CTM-025.PDF 4-27-98
Microbial Survivability Test for Medical Waste Incinerator Emissions. CTM-026.WPD 4-27-98
Microbial Survivability Test for Medical Waste Incinerator Emissions (PDF format). CTM-026.PDF 4-27-98
Screening Method for Air Toxics Emission Factors. SCREEN.ZIP 4-27-98
Screening Method for Air Toxics Emission Factors (PDF format). SCREPDF.ZIP 4-27-98
Procedure for Collection and Analysis of Ammonia in Stationary Sources. The validation report for this method can be found here. CTM-027.PDF 4-27-98
Direct Interface GC/MS Performance-Based Method (10/28/97). CTM-028.PDF 4-27-98
CARB Method 435-Asbestos in Serpentine Aggregate. CTM-029.WPD 4-27-98
CARB Method 435-Asbestos in Serpentine Aggregate (Adobe format). CTM-029.PDF 4-27-98
Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Emissions from Natural Gas-Fired Engines, Boilers and Process Heaters Using Portable Analyzers. Note: Please note that there is an ASTM Method (ASTM D6522-00) that is similar to this conditional test method and we strongly encourage you to consider its use in accordance with the applicability as specified in the method. CTM-030.PDF 10/13/97
Screening Method for Methylene Diphenyl Diisocyanate (MDI) (PDF format). CTM-031.PDF 3-17-99
Draft Method for Sampling and Analysis for High Levels of Phenol and Cresol Emissions From Stationary Sources CTM-032.ZIP 4-07-99
Draft Method for Sampling and Analysis for High Levels of Phenol and Cresol Emissions from Stationary Sources. CTM-032.PDF 4-07-99
Draft Method for Sampling and Analysis of Hydrogen Cyanide Emissions from Stationary Sources. Note: CTM-033 has been revised and is now OTM-29. The method was updated to address issues related to maintaining a pH of 12 and higher in the NaOH impingers during the test. CTM-033.PDF 3-8-11
Draft Method for the Determination of O2, CO, & (NO and NO2) for Periodic Monitoring CTM-034.PDF 5-20-09
SCAQMD Method 25.3 - Determination of Low Concentration Non-Methane Non-Ethane Organic Compound Emissions From Clean Fueled Combustion Sources CTM-035.PDF 04/04/2000
(Revised 03/05) Method for Sampling Isocyanate Stack Emissions CTM-036.PDF 03/04/05
(Revised 03/05) Method for Analyzing Isocyanate Stack Emissions CTM-036A.PDF 03/04/05
Method for Measurement of Formaldehyde Emissions From Natural Gas-Fired Stationary Sources - Acetyl Acetone Derivitization Method" has been proposed as Method 323 M-323.PDF
Measurement of Ammonia Emissions From Highway, Nonroad, and Stationary Use Diesel Engines by Extractive Fourier Transform Infrared (FTIR)Spectroscopy CTM-038.PDF 03/07/03
Measurement of PM 2.5 and PM 10 Emissions by Dilution Sampling (Constant Sampling Rate Procedures) Revised 7/04 CTM-039.WPD 09/30/04
Measurement of PM 2.5 and PM 10 Emissions by Dilution Sampling (Constant Sampling Rate Procedures) Revised 7/04 CTM-039.PDF 09/30/04
This Windows Media Movie provides a visualization of the hardware associated with the method described in Conditional Test Method 39. The file size of this movie is large (50Mb) and requires the Windows Media viewer. DST TOUR.WMV 06/03
Conditional Test Method - Determination of Volumetric Gas Flow in Rectangular Duct or Stacks Taking Into Account Velocity Decay Near the Stack or Duct Walls. CTM-041.PDF 11/30/04
Use of Flame Ionization Detector-Methane Cutter Analysis Systems for VOC Compliance Testing of Bakeries (Revised 08/04) CTM-042.DOC 09/03/04
Design Specifications for Opacity Monitors to be Used Where Opacity Limits are Less than 10 percent. Note: Please note that there is now an Annex to an ASTM Method (Annex 1 to ASTM D6216-07) that updates this method and more completely addresses low opacity measurement. We strongly recommend that you consider its use in lieu of CPS-001. CPS-001.PDF 09/25/02

File Utilities


Local Navigation


Jump to main content.