1. Name of the facility
	DaimlerChrysler Corporation - Toledo Supplier Park	

2. Location
	4000 Stickney Avenue
	Toledo, Ohio	

3. Distance from the US/Canada border
	25 miles

4. Type/size of the facility
	Automobile assembly plant with an annual production capacity of 200,064 vehicles.

5. Source of emissions
	Primary emissions result from the application of color and protective coatings to the vehicle, 
	and the miscellaneous combustion of natural gas for process and comfort heating.

6. Type of fuel
	Natural gas will fuel all combustion processes with #2 fuel oil as stand by for the main boilers.

7. Type/quantity of mass emission rates
	This project, if approved, will result in permit allowable emissions for the new sources as defined 
	in the following table.  Because this project also includes the shutdown of existing sources, net reductions 
	in criteria pollutants are expected.   Decreases in emissions of volatile organic compounds (VOC) and nitrogen 
	oxides (NOx) that offset and exceed the amount of the new source emissions, are required as part of this permit.  
	The proposed allowable criteria pollutant air emission rates for the new sources and the net increase or decrease 
	associated with this project are as follows:

                                                                                Project Net
                                Permit Allowable        Shutdown Decreases      Increases (Decreases)
              Pollutant         (Tons/Year)             (Tons/Year)             (Tons/Year)
              ---------         ----------------        ------------------      ---------------------
				
                VOC             676.35                  743.99                  (67.64)
                NOx              64.48                   70.93                   (6.45)
                Particulate      69.53                     *                       *
                PM10             51.28                     *                       *
                CO               61.26                     *                       *
                SO2              27.22                     *                       *
				
	* Additional reductions occurred for these pollutants but were not calculated because offsets are not required for 
	these pollutants.

8. Emission control technology
	Individual emissions units are restricted by a combination of BACT and LAER limitations including:  production restrictions, 
	coating organic compound content limitations, thermal oxidation, partiulate filtration and proper work practices. 
			 
9. Date permit application received
	March 16, 2004

10. Stack height and diameter 
	Multiple stacks and fugitive emissions sources prevent an accurate representation of this function.  The tallest stack is 
	51.48 m.

11.Permit agency's contact name, address, telephone number
	Robert Kossow
	Toledo Division of Environmental Services
	348 South Erie Street
	Toledo, Ohio  43614
	419-936-3941