1.Name of the facility
      Severstal North America

2. Location
      3001 Miller Rd, Dearborn, MI

3. Distance from the US/Canada border
      about 20 Km

4. Type/size of the facility
      Steel and iron production facility

5. Source of emissions
      Blast furnaces, basic oxygen furnace, 
      refining facilities, annealing furnace, 
      slab reheat furnaces

6. Type of fuel
      Natural gas and furnace gas

7. Type/quantity of mass emission rates
      CO: blast furnace stove limits are 13.7 lb/MMscf blast 
       (furnace gas burned) and 84.0 lb/MMscf 
       (natural gas burned), 61.7 lb/hour
      SO2: Furnance stove limits are 14.37 lb/MMscf blast furnace gas 
       burned (58.3 lb/hr) and 16.62 lb/MMscf blast furnace 
       gas burned (67.3 lb/hr) if another blast furnace is not 
       operating; 1465 lb/hr
      VOC: 4.31 lb/hr
      NOx: 13.5 lb/MMscf (furnace gas burned) and 
       140 lb/MMscf (natural gas burned)
      PM and PM10: from 0.0015 gr/dscf to 
       0.01 gr/dscf, depending on the equipment

8. Emission control technology
      Low-NOx burners, baghouses, ESP, 
      good combustion practices fuel sulfur content monitoring
             
9. Date permit application received
      July 13, 2005

10. Stack height and diameter 
      stacks( minimum heights and maximum diameters are 
      in concordance with 40 CFR 52.21 Subparts (c) and (d).

11.Permit agency(s contact name, address, telephone number
      Jim Donaldson
      Michigan Department of Environmental Quality, 
      Air Quality Division, 
      PO Box 30260
      Lansing, MI, 48909 - 7760
      Tel. 517 241-7470