- Name of the facility:
DaimlerChrysler Corporation - Toledo Supplier Park
4000 Stickney Avenue,Toledo, Ohio
- Distance from the US/Canada border:
- Type/size of the facility:
Automobile assembly plant with an annual production capacity of 200,064 vehicles.
- Source of emissions:
Primary emissions result from the application of color and protective coatings to the vehicle,
and the miscellaneous combustion of natural gas for process and comfort heating.
- Type of fuel:
Natural gas will fuel all combustion processes with #2 fuel oil as stand by for the main boilers.
- Type/quantity of mass emission rates:
This project, if approved, will result in permit allowable emissions for the new sources as defined
in the following table. Because this project also includes the shutdown of existing sources, net reductions
in criteria pollutants are expected. Decreases in emissions of volatile organic compounds (VOC) and nitrogen
oxides (NOx) that offset and exceed the amount of the new source emissions, are required as part of this permit.
The proposed allowable criteria pollutant air emission rates for the new sources and the net increase or decrease
associated with this project are as follows:
|Project Net Increases (Decreases)
* Additional reductions occurred for these pollutants but were not calculated because offsets are not
required for these pollutants.
- Emission control technology:
Individual emissions units are restricted by a combination of BACT and LAER limitations including: production restrictions,
coating organic compound content limitations, thermal oxidation, partiulate filtration and proper work practices.
- Date permit application received:
- Stack height and diameter:
Multiple stacks and fugitive emissions sources prevent an accurate representation of this function. The tallest stack is
- Permit agency's contact name, address, telephone number:
Toledo Division of Environmental Services
348 South Erie Street
Toledo, Ohio 43614