Jump to main content.


OAR Policy and Guidance Metarecord

Document Title/Subject:
National Emission Standards for Hazardous Air Pollutants (NESHAP) for Group I and Group IV Polymers and Resins -- direct final rule; notice of stay
Related Documents:
Proposed rule, 64FR35107
Signed by: Administrator

Signature Date: June 24,1999

Contact:
Bob Rosensteel

Filename(s): http://www.epa.gov/ttn/oarpg/t3/fr_notices/stayi_iv.pdf
URL(s):

 

Regulatory Authority:
Title 3
Division:
Emission Standards Division (OAQPS)
Submitted By:
Rosensteel.Bob
Document Type:
Proposed & Final Preambles & Rules,
EPA Document Number:

Federal Register:
64FR35023 6/30/99
Supersedes:
Subject Category:
AIR
Toxics
Keywords:
Chemical industry
Hazardous air pollutants
HAPs
Maximum Achievable Control Technology Emission Standards
MACTs
National Emission Standards for Hazardous Air Pollutants
NESHAPs
Terms:
Air pollutants
Clean Air Act
CAA
Industrial processes
Abstract:
The EPA is taking direct final action to indefinitely stay the compliance dates for portions of the national emission standards for hazardous air pollutants (NESHAP) for Group I Polymers and Resins and Group IV Polymers and Resins. This direct final rule stays, indefinitely, the compliance dates for existing affected sources and new affected sources with an initial start up date on or after March 9, 1999, which are subject to the Group I Polymers and Resins and Group IV Polymers and Resins NESHAP requirements for all emission points except equipment leaks. This stay will remain in effect until the date that the amendments to these rules (which were proposed on March 9, 1999) are promulgated, at which point the EPA will publish new compliance dates for these affected sources. The EPA is issuing this stay of the compliance dates for existing affected sources and for new affected sources with an initial start up date on or after March 9, 1999, because of the significant amendments to these NE SHAP that were proposed on March 9, 1999. It is unlikely that those amendments will be promulgated before the compliance dates for existing affected sources subject to Group I and Group IV Polymers and Resins regulations (September 5, 1999, and September 12, 1999, respectively).

Site Index | File Utilities


Local Navigation


Jump to main content.