Jump to main content.


OAR Policy and Guidance Metarecord

Document Title/Subject:
OMB Approval Number under the Paperwork Reduction Act; National Emission Standards for Hazardous Air Pollutant Emissions: Group I Polymers and Resins & Group IV Polymers and Resins
Related Documents:
1. Proposed Rule - National Emission Standards for Hazardous Air
Pollutant Emissions for Butyl Rubber Production, Epichlorohydrin Elastomers Production, Ethylene-Propylene Elastomers Production, HypalonTM Production, Neoprene Production, Nitrile Butadiene Rubber Production, Polybutadiene Rubber Production, and Styrene-Butadiene Rubber and Latex Production (Group 1 Polymers and Resins.

TTN File Name to Download: PR1-RUL.ZIP

2. Background Document - Hazardous Air Pollutant Emissions from
Process Units in the Elastomers Manufacturing Industry --
Basis and Purpose Document for Proposed Standards.

TTN File Name to Download: PR1-BP.ZIP

3. Fact Sheet - Proposed Subpart U - National Emission Standards
for Hazardous Air Pollutant Emissions from Elastomer Production.

TTN File Name to Download: PR1-FACT.WPF

4. Final Rule - National Emission Standards for Hazardous Air
Pollutant Emissions: Group I Polymers and Resins.

TTN File Name to Download: GRI_REG.ZIP

5. Final Background Document - Hazardous Air Pollutant Emissions
from Process Units in the Elastomer Manufacturing Industry -- Basis and Purpose Document for Final Standards, Summary of Public Comments and Responses.

TTN File Name to Download: GRIB&P.ZIP

6. Fact Sheet - Promulgated Subpart U - National Emission
Standards for Hazardous Air Pollutant Emissions from
Elastomer Production.

TTN File Name to Download: GRIFACT.WPF

7. Direct Final Rule - National Emission Standards for Hazardous Air Pollutant Emissions for Group 1 Polymers and Resins and Group IV Polymers and Resins.

TTN File Name to Download: P&RDFR.DOC

8. Proposed Rule - National Emission Standards for Hazardous Air Pollutant Emissions for Group 1 Polymers and Resins and Group IV Polymers and Resins.


TTN File Name to Download: P&RPROP.DOC
Signed by: Mary D. Nichols, Asst. Adminstrator

Signature Date: July 8, 1997

Contact:
Bob Rosensteel
(919) 541-5608

Filename(s):
http://www.epa.gov/ttn/oarpg/t3/fr_notices/polyresi.pdf
URL(s):

 

Regulatory Authority:
Title 3
Division:
Emission Standards Division (OAQPS)
Submitted By:
Rosensteel.Bob
Document Type:
Final Rules - Correcting Amendments
EPA Document Number:
NA
Federal Register:
62 FR 377720; 7/15/97
Supersedes:
Subject Category:
AIR
Toxics
Keywords:
Hazardous air pollutants
HAPs
Maximum Achievable Control Technology Emission Standards
MACTs
National Emission Standards for Hazardous Air Pollutants
NESHAPs
Terms:
Air pollutants
Clean Air Act
CAA
Abstract:
This action corrects errors and clarifies regulatory text in the "National Emission Standards for Hazardous Air Pollutants: Group I Polymers and Resins," (40 CFR part 63, subpart U) which was issued as a final rule on September 5, 1996, and in the "National Emission Standards for Hazardous Air Pollutants: Group IV Polymers and Resins," (40 CFR part 63, subpart JJJ) which was issued as a final rule on September 12, 1996.

In addition, in compliance with the Paperwork Reduction Act (PRA), this document announces that the Information Collection Requirements (ICR) contained in the "National Emission Standards for Hazardous Air Pollutants: Group 1 Polymers and Resins," Final Rule (61 FR 46906), which were not previously approved under the Office of Management and Budget (OMB), have been approved by OMB under control number 2060-0356. The ICRs in the affected sections of the regulation are effective July 15, 1997. This action also amends the OMB approval table to list the OMB control number issued under the PRA for the affected sections.

Site Index | File Utilities


Local Navigation


Jump to main content.