Try Me First - Read Me First

These instructions are to help the first time user of 
AERMOD and its associated programs to install, setup, and 
run a simple test case.

System Requirements:

	Any modern PC that meets the recommended, not minimum, 
	RAM memory and CPU requirements of the respective 
	Operating System should be adequate enough to run the 
	AERMOD modeling system.   Any computer system recently 
	built as a "work station" should have more than enough 
	RAM memory, CPU processing power, and hard drive space 
	to run AERMOD.

  If your system meets these requirements, please proceed. 
  If you need help, please contact us through the
  "Contact Us" link on our SCRAM Web Site.

Try Me First Initial Installation Instructions:

  Using Windows Explorer, create a subdirectory:
  C:\AERMOD\Tryme

  Download and save the Try Me First instructions (this  
  file and its pdf file cousin) to the Tryme subdirectory.

  Then download the Sample Run.zip file into the same 
  subdirectory, c:\AERMOD\tryme.  

  Unzip SampleRun.zip into your “tryme” subdirectory.

  Please read the Try Me First Sample Run.pdf

If you have any problems or questions, feel free to use
the "Contact Us" link on SCRAM to send us an email.