Jump to main content or area navigation.

Contact Us

Technology Transfer Network - Air Toxics Web Site

Formaldehyde

 
50-00-0

Hazard Summary-Created in April 1992; Revised in January 2000

Formaldehyde is used mainly to produce resins used in particleboard products and as an intermediate in the synthesis of other chemicals.  Exposure to formaldehyde may occur by breathing contaminated indoor air, tobacco smoke, or ambient urban air.  Acute (short-term) and chronic (long-term) inhalation exposure to formaldehyde in humans can result in respiratory symptoms, and eye, nose, and throat irritation.  Limited human studies have reported an association between formaldehyde exposure and lung and nasopharyngeal cancer.  Animal inhalation studies have reported an increased incidence of nasal squamous cell cancer. EPA considers formaldehyde a probable human carcinogen (Group B1).


Please Note: The main sources of information for this fact sheet are EPA's Health and Environmental Effects Profile for Formaldehyde and the Integrated Risk Information System (IRIS), which contains information on oral chronic toxicity and the RfD, and the carcinogenic effects of formaldehyde including the unit cancer risk for inhalation exposure.

Uses

  • Formaldehyde is used predominantly as a chemical intermediate.  It also has minor uses in agriculture, as an analytical reagent, in concrete and plaster additives, cosmetics, disinfectants, fumigants, photography, and wood preservation. (1,2)
  • One of the most common uses of formaldehyde in the U.S is manufacturing urea-formaldehyde resins, used in particleboard products. (7)
  • Formaldehyde (as urea formaldehyde foam) was extensively used as an insulating material until 1982 when it was banned by the U.S. Consumer Product Safety Commission. (1,2)

Sources and Potential Exposure

  • The highest levels of airborne formaldehyde have been detected in indoor air, where it is released from various consumer products such as building materials and home furnishings.  One survey reported formaldehyde levels ranging from 0.10 to 3.68 parts per million (ppm) in homes.  Higher levels have been found in new manufactured or mobile homes than in older conventional homes. (1)
  • Formaldehyde has also been detected in ambient air; the average concentrations reported in U.S. urban areas were in the range of 11 to 20 parts per billion (ppb).  The major sources appear to be power plants, manufacturing facilities, incinerators, and automobile exhaust emissions. (7)
  • Smoking is another important source of formaldehyde. (1)
  • Formaldehyde may also be present in food, either naturally or as a result of contamination. (1)

Assessing Personal Exposure

  • Blood levels of formaldehyde can be measured. However, these measurements are only useful when exposure to relatively large amounts of formaldehyde has occurred. (2)

Health Hazard Information

Acute Effects:
  • The major toxic effects caused by acute formaldehyde exposure via inhalation are eye, nose, and throat irritation and effects on the nasal cavity.  Other effects seen from exposure to high levels of formaldehyde in humans are coughing, wheezing, chest pains, and bronchitis. (1,2)
  • Ingestion exposure to formaldehyde in humans has resulted in corrosion of the gastrointestinal tract and inflammation and ulceration of the mouth, esophagus, and stomach. (1,2)
  • Acute animal tests in rats and rabbits have shown formaldehyde to have high acute toxicity from inhalation, oral, and dermal exposure. (3)
Chronic Effects (Noncancer):
  • Chronic exposure to formaldehyde by inhalation in humans has been associated with respiratory symptoms and eye, nose, and throat irritation. (1,2,4,5)
  • Repeated contact with liquid solutions of formaldehyde has resulted in skin irritation and allergic contact dermatitis in humans. (5)
  • Animal studies have reported effects on the nasal respiratory epithelium and lesions in the respiratory system from chronic inhalation exposure to formaldehyde. (1,2,4,5)
  • The Reference Dose (RfD) for formaldehyde is 0.2 milligrams per kilogram body weight per day (mg/kg/d) based on a decrease in body weight gain and effects on the stomach in rats. The RfD is an estimate (with uncertainty spanning perhaps an order of magnitude) of a daily oral exposure to the human population (including sensitive subgroups) that is likely to be without appreciable risk of deleterious noncancer effects during a lifetime.  It is not a direct estimator of risk but rather a reference point to gauge the potential effects.  At exposures increasingly greater than the RfD, the potential for adverse health effects increases.  Lifetime exposure above the RfD does not imply that an adverse health effect would necessarily occur. (6)
  • EPA has high confidence in the study on which the RfD was based since it consisted of an adequate number of animals of both sexes, as well as a thorough examination of toxicological and histological parameters; medium confidence in the database as several additional chronic bioassays and reproductive and developmental studies support the critical effect and study; and, consequently, medium confidence in the RfD. (6)
  • EPA has not established a Reference Concentration (RfC) for formaldehyde. (6)
  • The Agency for Toxic Substances and Disease Registry (ATSDR) has established a chronic inhalation minimal risk level (MRL) of 0.003 ppm (0.004 milligrams per cubic meter, mg/m3) based on respiratory effects in humans. The MRL is an estimate of the daily human exposure to a hazardous substance that is likely to be without appreciable risk of adverse noncancer health effects over a specified duration of exposure. (7)
Reproductive/Developmental Effects:
  • An increased incidence of menstrual disorders were observed in female workers using urea-formaldehyde resins. However, possible confounding factors were not evaluated in this study. (1,2)
  • A study of hospital equipment sterilizing workers did not report an association between formaldehyde exposure and increased spontaneous abortions. (1,2)
  • Developmental effects, such as birth defects, have not been observed in animal studies with formaldehyde. (1,2)
Cancer Risk:
  • Occupational studies have noted statistically significant associations between exposure to formaldehyde and increased incidence of lung and nasopharyngeal cancer. This evidence is considered to be "limited," rather than "sufficient," due to possible exposure to other agents that may have contributed to the excess cancers. (1,6)
  • Animal studies have reported an increased incidence of nasal squamous cell carcinomas by inhalation exposure. (1,6)
  • EPA considers formaldehyde to be a probable human carcinogen (cancer-causing agent) and has ranked it in EPA's Group B1. (6)
  • EPA uses mathematical models, based on animal studies, to estimate the probability of a person developing cancer from breathing air containing a specified concentration of a chemical. EPA calculated an inhalation unit risk estimate of 1.3 × 10-5 (µg/m3)-1. EPA estimates that, if an individual were to continuously breathe air containing formaldehyde at an average of 0.08 µg/m3 (8.0 x 10-5 mg/m3) over his or her entire lifetime, that person would theoretically have no more than a one-in-a-million increased chance of developing cancer as a direct result of breathing air containing this chemical. Similarly, EPA estimates that breathing air containing 0.8 µg/m3 (8.0 x 10-4 mg/m3) would result in not greater than a one-in-a-hundred thousand increased chance of developing cancer, and air containing 8.0 µg/m3 (8.0 x 10-3 mg/m3) would result in not greater than a one-in-ten-thousand increased chance of developing cancer. For a detailed discussion of confidence in the potency estimates, please see IRIS. (6)

Physical Properties

  • The chemical formula for formaldehyde is CH2O and the molecular weight is 30.03 g/mol. (1)
  • The vapor pressure for formaldehyde is 10 mm Hg at -88 °C, and its log octanol/water partition coefficient (log Kow) is -0.65. (1)
  • Formaldehyde is a colorless gas with a pungent, suffocating odor at room temperature; the odor threshold for formaldehyde is 0.83 ppm. (1,8)
  • Formaldehyde is readily soluble in water at room temperature. (1)
  • Commercial formaldehyde is produced and sold as an aqueous solution containing 37 to 50 percent formaldehyde by weight. (1)

Conversion Factors:
To convert concentrations in air (at 25°C) from ppm to mg/m3: mg/m3 = (ppm) × (molecular weight of the compound)/(24.45).  For formaldehyde: 1 ppm = 1.23 mg/m3.

Health Data from Inhalation Exposure
Formaldehyde graph
AIHA ERPG--American Industrial Hygiene Association's emergency response planning guidelines. ERPG 1 is the maximum airborne concentration below which it is believed nearly all individuals could be exposed up to one hour without experiencing other than mild transient adverse health effects or perceiving a clearly defined objectionable odor; ERPG 2 is the maximum airborne concentration below which it is believed nearly all individuals could be exposed up to one hour without experiencing or developing irreversible or other serious health effects that could impair their abilities to take protective action.
ACGIH STEL--American Conference of Governmental and Industrial Hygienists' short-term exposure limit expressed as a time-weighted average exposure; the concentration of a substance which should not be exceeded at any time during a workday.
LC50 (Lethal Concentration50)--A calculated concentration of a chemical in air to which exposure for a specific length of time is expected to cause death in 50% of a defined experimental animal population.
NIOSH IDLH--National Institute of Occupational Safety and Health's immediately dangerous to life or health limit; NIOSH recommended exposure limit to ensure that a worker can escape from an exposure condition that is likely to cause death or immediate or delayed permanent adverse health effects or prevent escape from the environment.
NIOSH REL--NIOSH's recommended exposure limit; NIOSH recommended exposure limit for an 8- or 10-h time-weighted average exposure and/or ceiling.
OSHA PEL--Occupational Safety and Health Administration's permissible exposure limit expressed as a time-weighted average; the concentration of a substance to which most workers can be exposed without adverse effect averaged over a normal 8-h workday or a 40-h workweek.

The health and regulatory values cited in this factsheet were obtained in 1999.
aHealth numbers are toxicological numbers from animal testing or risk assessment values developed by EPA.
bRegulatory numbers are values that have been incorporated in Government regulations, while advisory numbers are nonregulatory values provided by the Government or other groups as advice.  OSHA numbers are regulatory, whereas NIOSH, ACGIH, and AIHA numbers are advisory.

References

  1. U.S. Environmental Protection Agency. Health and Environmental Effects Profile for Formaldehyde. EPA/600/x-85/362. Environmental Criteria and Assessment Office, Office of Health and Environmental Assessment, Office of Research and Development, Cincinnati, OH. 1988.
  2. World Health Organization. Environmental Health Criteria for Formaldehyde. Volume 89. World Health Organization, Geneva, Switzerland. 1989.
  3. U.S. Department of Health and Human Services. Registry of Toxic Effects of Chemical Substances (RTECS, online database). National Toxicology Information Program, National Library of Medicine, Bethesda, MD. 1993.
  4. E.J. Calabrese and E.M. Kenyon. Air Toxics and Risk Assessment. Lewis Publishers, Chelsea, MI. 1991.
  5. U.S. Department of Health and Human Services. Hazardous Substances Databank (HSDB, online database). National Toxicology Information Program, National Library of Medicine, Bethesda, MD. 1993.
  6. U.S. Environmental Protection Agency. Integrated Risk Information System (IRIS) on Formaldehyde. National Center for Environmental Assessment, Office of Research and Development, Washington, DC. 1999.
  7. Agency for Toxic Substances and Disease Registry (ATSDR).  Toxicological Profile for Formaldehyde (Draft).  Public Health Service, U.S. Department of Health and Human Services, Atlanta, GA.  1997.
  8. J.E. Amoore and E. Hautala. Odor as an aid to chemical safety: Odor thresholds compared with threshold limit values and volatilities for 214 industrial chemicals in air and water dilution. Journal of Applied Toxicology, 3(6):272-290. 1983.
  9. American Conference of Governmental Industrial Hygienists (ACGIH).  1999 TLVs and BEIs.  Threshold Limit Values for Chemical Substances and Physical Agents, Biological Exposure Indices.  Cincinnati, OH.  1999.
  10. National Institute for Occupational Safety and Health (NIOSH).  Pocket Guide to Chemical Hazards.  U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention.  Cincinnati, OH.  1997.
  11. Occupational Safety and Health Administration (OSHA).  Occupational Safety and Health Standards, Toxic and Hazardous Substances.  Code of Federal Regulations 29 CFR 1910.1048.  1998.
  12. American Industrial Hygiene Association (AIHA). The AIHA 1998 Emergency Response Planning Guidelines and Workplace Environmental Exposure Level Guides Handbook.  1998.

  13.  

Jump to main content.