Hazardous Waste Combustors; Revised Standards; Final Rule - Part 1
You will need Adobe Reader to view some of the files on this page. See EPA's PDF page to learn more.
RCRA Comparable Fuel Exclusion; Permit Modifications for Hazardous Waste Combustion Units; Notification of Intent To Comply; Waste Minimization and Pollution Prevention Criteria for Compliance Extensions, June 19, 1998
On April 19, 1996, EPA proposed revisions for air emission standards for certain hazardous waste combustion units. Today's rule finalizes some elements of that proposal. These elements include a conditional exclusion from RCRA for fuels which are produced from a hazardous waste, but which are comparable to some currently used fossil fuels; a new RCRA permit modification provision which is intended to make it easier for facilities to make changes to their existing RCRA permits when adding air pollution control equipment or making other changes in equipment or operation needed to comply with the upcoming air emission standards; notification requirements for sources which intend to comply with the final rule; and allowances for extensions to the compliance period to promote the installation of cost effective pollution prevention technologies to replace or supplement emission control technologies for meeting the emission standards.
Index (Text) (7K) - RCRA Docket F-98-RCSF-FFFFF: Hazardous Waste Combustors;
Revised Standards; Final Rule - Part 1: RCRA Comparable Fuel Exclusion;
Permit Modifications for Hazardous Waste Combustion Units; Notification
of Intent to Comply; Waste Minimization and Pollution Prevention Criteria
for Compliance Extensions
Analysis Report For The Combustion MACT Fast-Track Rulemaking (Updated) (PDF)
(101 pp, 370K)
- Environmental Fact Sheet: Final Standards for Hazardous Waste Combustors
- Phase I (PDF) (2 pp, 13K) || Text File (6K)
Technical Support Document for HWC MACT Standards: Development of Comparable
Fuels Specifications (PDF) (316 pp, 1.3MB)
- Response to Comments Document, Hazardous Waste Combustors, Revised Standards, Final Rule - Part I (PDF) (668 pp, 2.0MB)