Jump to main content.

e-Permitting Tools

These are tools you can use directly or to enhance your e-permitting system.

Model RCRA Permit That Can Be Downloaded for Permit Writers

Model permits can be a first step towards e-permitting. Here are two parts of a model joint permit between South Carolina and EPA Region 4.

Top of Page

Draft RCRA Model Standardized Permit

The following links are for the Draft RCRA Model Standardized Permits for Tanks, Containers, and Containment Buildings. The USEPA published a Notice of Proposed Rulemaking (NPRM) for the RCRA Standardized Permit on October 12, 2001 in the Federal Register.

The RCRA standardized permit is a general permit for facilities that generate waste on-site in tanks, containers, and containment buildings. Under the standardized permit, facility owners and operators would certify compliance with generic design and operating conditions set on a national basis. The permitting agency would review the certifications submitted by the facility owners or operators. The permitting agency would also be able to impose additional site- specific terms and conditions for corrective action or other purposes, as called for by RCRA.

Draft RCRA Model Standardized Permits

Tanks (124 pp, 207K, About PDF)
Containers (116 pp, 192K, About PDF)
Containment Buildings (116 pp, 193K, About PDF)

We expect to have the model permits available for use when the final standards are published.

Top of Page

Local Navigation

Jump to main content.