RCRA REVISION CHECKLIST 218

F019 Exemption for Wastewater Treatment Sludges from Auto Manufacturing Zinc Phosphating Processes
73 FR 31756-31769
	June 4, 2008
	(RCRA Cluster XVIII, Non-HSWA)

Name of State:  

State Statutory Authority: 

Title of Regulations:  							Effective Date:   

Date Checklist Completed:  

	
FEDERAL REQUIREMENTS	
FEDERAL RCRA CITATION	
ANALOGOUS STATE CITATION	
STATE ANALOG IS:	
				
EQUIV-ALENT	
LESS
STRIN-
GENT	
MORE STRIN-GENT	
BROADER IN SCOPE	
	PART 261—IDENTIFICATION AND LISTING OF HAZARDOUS WASTE 	
	SUBPART D -- Lists of Hazardous Wastes 	
	HAZARDOUS WASTE FROM NON-SPECIFIC SOURCES	
	Amend paragraph (a) by revising table entry for F019 as follows:	261.31(a)/Table						
	  Industry and EPA
 hazardous waste No.	Hazardous waste	Hazard 
code	
	*	*	*	*	*	*	*	
	F019…….........	Wastewater treatment sludges from the chemical conversion coating of aluminum except from zirconium phosphating in aluminum can washing when such phospating is an exclusive conversion coating process.  Wastewater treatment sludges from the manufacturing of motor vehicles using a zinc phosphating process will not be subject to this listing at the point of generation if the wastes are not placed outside on the land prior to shipment to a landfill for disposal and are either: disposed in a Subtitle D municipal or industrial landfill unit that is equipped with a single clay liner and is permitted, licensed or otherwise authorized by the state; or disposed in a landfill unit subject to, or otherwise meeting, the landfill requirements in 258.40, 264.301 or 265.301. For the purposes of this listing, motor vehicle  manufacturing is defined in paragraph (b)(4)(i) of this section and (b)(4)(ii) of this section describes the recordkeeping requirements for motor vehicle manufacturing facitlites.	(T)	
	Add paragraph (b)(4) to read as follows:	261.31						
	For the purposes of F019 listing, the following apply to wastewater treatment sludges fro the manufacturing of motor vehicles using a zinc phosphating process.	261.31(b)(4)						
	Motor vehicle manufacturing is defined to include the manufacture of automobiles and light trucks/utility vehicles.  Facilities must be engaged in manufacturing complete vehicles or chassis only.	261.31(b)(4)(i)						
	Generators must maintain records, to prove that the exempted sludges meet the conditions of the listing.  Records must include: volume of waste generated and disposed off site; when the wastes were generated and sent off site; name and address of receiving facility; documentation confirming receipt.  Generators must maintain these documents no less than three years.  Retention period for documentation is automatically extended during an enforcement action or as requested by the Regional Administrator or state regulatory authority	261.31(b)(4)(ii)