Where can I find the analytical results from drinking water samples?
All RadNet drinking water sampling results are available on the RadNet Envirofacts website. For more information, visit RadNet. Return to Frequent Questions About RadNet.
An official website of the United States government
Here’s how you know
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock () or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
All RadNet drinking water sampling results are available on the RadNet Envirofacts website. For more information, visit RadNet. Return to Frequent Questions About RadNet.
Samples of precipitation such as rain, snow or sleet are collected at more than 25 stations across the U.S. Samples are collected using specially designed precipitation collection devices which funnel the precipitation into a bucket for transfer to a shipping container. EPA’s National Analytical Radiation Environmental Laboratory (NAREL) receives the…
See More Frequent Questions about MOVES and Related Models. Although gallons of fuel consumed are not reported by MOVES, the factors used to convert total energy consumption (a MOVES reporting option) to gallons of fuel are contained in the FuelSubtype table (energy content, reported in kilojoules per gram of fuel)…
See More Frequent Questions about MOVES and Related Models. This problem usually occurs when the run specification does not include all possible vehicle and fuel types. MOVES internally allocates the input VMT to each of the source types and fuel types and only reports the VMT for the fuel types…
See More Frequent Questions about MOVES and Related Models. Very long run times are not unusual for Nonroad emission factor post-processing scripts, particularly with a large output database. To reduce script run time, we recommend doing the following: Reduce the size of your output database by choosing just the amount…
See More Frequent Questions about MOVES and Related Models. The RegionCounty table in the MOVES default database maps each county to a MOVES fuel region (defined by regionCodeID). If you are conducting a County or Project Scale Run, you do not need to modify this table to use alternate fuel…
See More Frequent Questions about MOVES and Related Models. To output vehicle populations, when setting up your RunSpec select the "Inventory" calculation type from the Scale panel and the "Population" activity option from the General Output panel of the MOVES GUI. The movesactivityoutput table in your MOVES output database will…
The risk management program regulations require the owner or operator of a covered stationary source to develop and implement an emergency response program as described in 40 CFR §68.95, which must include an emergency response plan, emergency response equipment procedures, employee training, and procedures to ensure the program is up-to-date…
Until the stream characterization assessment is completed, and the results analyzed, recreational use of Sulphur and Leslie Run should be avoided. While surface water is tested every three days and has not shown any contaminants at levels that exceed health standards since May 1, further investigation is needed to determine…
While generally defined as a building, a structure under the structural cleaning program will include only those habitable spaces where indoor occupancy is frequent and regularly occurring on a daily or near-daily basis. Examples of residential structures include primary residences and living spaces, and examples of commercial structures include offices…
The expectation is for cleaning to take less than one day. The duration will be dependent on the size of the structure and the scope of work.
While it is strongly recommended that you leave the property during the cleaning, you are not required to do so.
Basements or attics will be considered for cleaning if they are finished and habitable areas.