Science & Technology

This page shows all of the pages at www.epa.gov that are tagged with Science & Technology.

  • JE1058BS

    Technical product bulletin: this bioremediation agent used in oil spill cleanups contains biosurfacant and has the ability to stimulate the biodegradation of oil by indigenous microorganisms. It is a powder, and can be applied without pre-mixing.

  • LAND AND SEA RESTORATION

    Technical product bulletin: this bioremediation agent (nutrient additive) for oil spill cleanups can be used on water, soil, or hard surfaces. It will not damage cured asphalt if used as an absorbent for spills. Apply at 1 part to 3 parts hydrocarbon.

  • MARE CLEAN 200

    Technical product bulletin: this solvent-based dispersant for oil spill cleanups is not affected by salinity, and is effective on any liquid hydrocarbon. Solvent is paraffinic hydrocarbons, surfactants include sorbitan fatty acid esters and polysorbates.

  • MUNOX SR®

    Technical product bulletin: this bioremediation agent (microbiological culture) for oil spill cleanups can be applied to surface water, beaches, marsh, or wetland. It is effective even on heavy petroleum compounds, and does not damage marsh or wetlands.

  • NALE-IT

    Technical product bulletin: this surface washing agent for oil spill cleanups is applied by pressure sprayer to pit closures, surface hydrocarbon spills, compressor stations, pipeline and flow line leaks, well head and tank farm leaks, and highway spills

  • NATURE'S WAY HS

    Technical product bulletin: aka MICRO CLEAN or POWERCLEAN, this surface washing agent used in oil spill cleanups should be applied full strength to surfaces such as shorelines and beaches, pressure sprayed into cracks/crevices, and scrubbed well.

  • NEOS AB3000

    Technical product bulletin: this hydrocarbon solvent based dispersant used in oil spill cleanups can be sprayed neat on the oil slick in atomized form. Effective with crude and residual heavy oil, and also at controlling volatile emissions.

  • OSR-10

    Technical product bulletin: this surface washing agent used in spill cleanups separates the oil from the physical surface, which includes shorelines, rocks, and beaches, to allow it to be sprayed off with a water rinse.

  • PETRO-CLEAN

    Technical product bulletin: this surface washing agent used in oil spill cleanups on rocks, shorelines, sea walls, bridges, and highways. It is effective when applied through power washers or garden type sprayers in light dilution.

  • PETROMAX PSC 3

    Technical product bulletin: this surface washing agent used in oil spill cleanups reverses the charge of the sand particles holding the hydrocarbons so they repel each other - the separated hydrocarbons can then be easily removed.

  • PETROTECH 25

    technical product bulletin: this surface washing agent used in oil spill cleanups is generally applied neat in its factory supplied concentrate form. For lighter oils, with educting or proportioning equipment, an aqueous solution may be used.

  • RAPIDGRAB 2000™

    Technical product bulletin: this miscellaneous oil spill control agent used in cleanups is a non-ionic liquid formulation applied by mist spraying onto floating oil slicks and sheens. Uses oleophitic synergistic effect of contraction and congealment.

  • SAF-RON GOLD

    Technical product bulletin: this dispersant used in oil spill cleanups can be applied by aerial or boat sprayer. A recommended dispersant to water ratio of 1:40 can be used for most spills. Ratios are dependent upon type of oil and weather conditions.

  • SANDKLENE 950

    Technical product bulletin: this surface washing agent used in oil spill cleanups on sand is most effective in enclosed systems using centrifuges, shearing devices, or similar high speed equipment to process material.

  • SEA BRAT #4

    Technical product bulletin: this dispersant used in oil spill cleanups may be applied to coastal waters of the US. It is designed for hydrocarbon spills on water temperatures between 50 and 90 degrees Fahrenheit.

  • SIMPLE GREEN®

    Technical product bulletin: this water based surface washing agent used in oil spill cleanups is equally effective in fresh water, estuarine, and marine environments at all temperatures. Spray directly on surface of oil.

  • SOC-10

    Technical product bulletin: this water based surface washing agent used in oil spill cleanups may be sprayed onto soil, sand, or rocks. Suitable for slicks, sheens, and emulsions in fresh, river, brackish, or salt water. Not suitable for tar masses.

  • SOIL RX

    Technical product bulletin: aka BIO-REGEN HYDROCARBON, this bioremediation agent (microbiological culture, nutrient additive) used in oil spill cleanups is a liquid formulation of humic acid, hydrocarbon-oxidizing bacteria, and amino acid complex.

  • SPILLCLEAN

    Technical product bulletin: this surface washing agent for oil spill cleanups comes in either "concentrate" or "original formula." Being a surfactant-type product, it emulsifies oil so it can then be lifted and separated from the hard surface.

  • 2017 National Emissions Inventory (NEI) Resources for State, Local, Tribal Agencies

    Supporting document for 2017 NEI, including instructions for submitting inputs

Subscribe to the RSS feed for this search