Glossary for Air Pollution Terms in Particle Pollution and Your Patients' Health
Air quality advisories - These advisories are usually called when the Air Quality Index (or AQI) gets into the unhealthy ranges. Different air pollution control agencies call them at different levels.
Air Quality Index (AQI) - A nationally uniform index for reporting and forecasting daily air quality. It is used to report on the four most common ambient air pollutants that are regulated under the Clean Air Act: ground-level ozone, particle pollution (PM10 and PM2.5), carbon monoxide (CO), and sulfur dioxide (SO2). The AQI focuses on health effects that may be experienced within a few hours or days after breathing polluted air.
Carbon monoxide (CO) - A colorless, odorless gas that can be harmful when inhaled in large amounts. CO is released when something is burned. The greatest sources of CO to outdoor air are cars, trucks, and other vehicles or machinery that burn fossil fuels.
Children - People less than 18 years of age.
Coarse particles (also known as PM10-2.5) - Particles with diameters generally larger than 2.5 micrometers (µm) and smaller than, or equal to, 10 µm in diameter.
Fine particles (also known as PM2.5) - Particles that are generally 2.5 µm in diameter or smaller. This group of particles also encompasses ultrafine particles and nanoparticles which are generally classified as having diameters less than 0.1 µm.
HEPA (high-efficiency particulate air) filter - A type of pleated mechanical air filter. It is an acronym for "high-efficiency particulate air [filter]" (as officially defined by the U.S. Dept. of Energy). This type of air filter can theoretically remove at least 99.97% of dust, pollen, mold, bacteria, and any airborne particles with a size of 0.3 microns (µm).
Hygroscopicity - The quality of absorbing or attracting moisture from the air.
Integrated Science Assessments (ISA) - Reports that represent concise evaluations and syntheses of the most policy-relevant science for reviewing the National Ambient Air Quality Standards (NAAQS). All Integrated Science Assessments are vetted through a rigorous peer review process, including review by the Clean Air Scientific Advisory Committee as well as the public. See EPA's Integrated Scientific Assessments website for more information.
Inversion - An atmospheric condition where a layer of cooler air is trapped near the ground by a layer of warmer air above. When the air cannot rise, pollution at the surface also is trapped and can accumulate, leading to higher concentrations of ozone and particle pollution.
National Ambient Air Quality Standard (NAAQS) - The Clean Air Act requires EPA to set National Ambient Air Quality Standards for pollutants considered harmful to public health and the environment.The EPA has set National Ambient Air Quality Standards for six criteria pollutants: sulfur dioxide (S02), particulates (PM2.5/PM10), nitrogen oxides (NOx), carbon monoxide (CO), ozone (O3), and lead (Pb). Periodically, the standards are reviewed and may be revised.
Older adults - In many studies, older adults are defined as ages 65 years and older due to age definitions provided in health datasets such as the Medicare database. In terms of increased risk from air pollution, there is not a specific age at which someone is considered “older” because people age at different rates. As a person ages, there is greater susceptibility to environmental hazards due to a number of factors, including higher prevalence of pre-existing respiratory and cardiovascular disease, as well as the gradual decline in physiological defenses that occur as part of the aging process.
Ozone - Ground level ozone is not emitted directly into the air, but is created by chemical reactions between oxides of nitrogen (NOx) and volatile organic compounds (VOC). This happens when pollutants emitted by cars, power plants, industrial boilers, refineries, chemical plants, and other sources chemically react in the presence of sunlight. Ozone at ground level is a harmful air pollutant, because of its effects on people and the environment, and it is the main ingredient in “smog."
Particle pollution (also known as particulate matter or PM) - General term for a mixture of solids and liquid droplets suspended in the air.
Primary fine particles - Fine particles that are emitted directly from a source, such as construction sites, unpaved roads, smokestacks, or fires.
Secondary fine particles - Fine particles that form in complicated reactions in the atmosphere of chemicals, such as sulfur dioxides and nitrogen oxides, that are emitted from power plants, industries, and automobiles.
Sensitive groups (also called at-risk populations) - A term used for a category of persons at increased risk of experiencing adverse health effects related to air pollution exposures. These groups can be at increased risk due to intrinsic factors (biological), extrinsic factors (external, non-biological), higher exposure, and/or increased dose at a given concentration. The severity of the health effects that these groups experience may be much greater than in the general population.
Socio-economic status (SES) - A composite measure that is often comprised of a number of indicators, including economic status measured by income, social status measured by education, and work status measured by occupation. Each of these linked factors can influence a population's susceptibility to particle pollution-related health effects (Dutton and Levine, 1989).
Sulfur dioxide (SO2) - One of a group of gases called sulfur oxides (SOx). While all of these gases are harmful to human health and the environment, SO2 is of greater concern. The largest sources of SO2 emissions are from fossil fuel combustion at power plants and other industrial facilities.
Ultrafine particles (also known as PM0.01) - Particles that are generally classified as having diameters less than 0.1 µm.