Laws & Regulations
-
South Fork Wind LLC's - South Fork Windfarm Outer Continental Shelf Air Permit
On January 18, 2022, EPA issued the final permit for the proposed construction and operation of South Fork Wind, LLC’s offshore windfarm on the Outer Continental Shelf (OCS).
-
Search SNEP Articles, Newsletters, Videos, & Workshops
Search for articles, newsletters, videos & workshops by the Southeast New England Program.
-
State of Oregon
This page provides information about the Oregon Department of Environmental Quality, a selected applicant for EPA's Climate Pollution Reduction Grants (CPRG) program, which is part of the Inflation Reduction Act.
-
Stone Quarrying, Crushing and Screening Facilities General Air Quality Permit Coverage for CPM Development Corporation at Pendleton Mission Quarry, Pendleton, Oregon on the Umatilla Reservation
EPA's approval of coverage under the SQCS general permit for CPM Development Corporation (SQCS Plant) - 73569 McKay Lane, (Pendleton Mission Quarry), Pendleton, Oregon on the Umatilla Reservation.
-
Louisiana LAC 33:III Ch. 13 Section 1303 - Provisions Governing Specific Activities, SIP effective August 4, 2011 (LAd34)
LA SIP: 33 LAC III Ch. 13 Section 1303.A
-
Title V Permit for Merck Sharp and Dohme Quimica in Barceloneta, Puerto Rico
This operating permit is being issued under a Pollution Prevention in Permitting Project (P4) as a flexible model permit for the pharmaceutical industry pursuant to 40 CFR Part 63, Subpart GGG.
-
Economic Impact Analysis of the Plywood and Composite Wood Products National Emissions Standards for Hazardous Air Pollutants (NESHAP)
This 2002 report includes the costs associated with the regulatory control options associated with the proposed NESHAP, results of the economic impact analysis, a summary of impacts on small businesses, and results of the monetized benefits analysis.
-
Inputs to the Pulp and Paper Industry October 2011 Residual Risk Assessment
The U.S. Environmental Protection Agency (EPA) has to conduct risk assessments on each source category subject to MACT standards and determine if additional standards are needed to reduce residual risks.
-
Economic Impact Analysis: Final Revisions to the National Emission Standards for Hazardous Air Pollutants Subpart S (MACT I and MACT III) for the Pulp and Paper Industry
The purpose of this July 2012 economic impact analysis (EIA) is to present the results of the Agency’s evaluation of the cost, economic impacts, and benefits from compliance with the requirements of these Maximum Achievable Control Technologies (MACT).
-
Clean Air Act Section 112(d)(6) Technology Review for Pulping and Papermaking Processes Memorandum
The purpose of this November 2011 document is to present the results of a review of available information on developments in practices, processes, and control technologies that apply to pulping and papermaking processes.
-
Final Rule for Industrial Process Cooling Towers: Fact Sheet
Fact sheet concerning a final rule to reduce air toxics emissions from industrial process cooling towers. Air toxics are those pollutants known or suspected of causing cancer or other serious health effects.
-
Fact Sheet: Final Air Toxics Standards for Area Sources in the Chemical Manufacturing Industry
Fact sheet on the national air toxics standards issued October 16, 2009 by the Environmental Protection Agency (EPA) for smaller-emitting sources, known as area sources, in the chemical manufacturing industry.
-
Fact Sheet: Proposed Air Toxics Rule for Pharmaceuticals Production
This fact sheet concerns a proposed regulation to reduce emissions of toxic air pollutants from the manufacture of pharmaceutical products.
-
Fact Sheet: Final Air Toxics Standards for Area Sources in Seven Industry Sectors
This fact sheet discusses national emission standards for acrylic and modacrylic fibers production, carbon black production, chemical manufacturing: chromium compounds, flexible polyurethane foam production and fabrication, lead acid battery manufacturing,
-
Standards of Performance for New Stationary Sources; Ammonium Sulfate Manufacture: 1980 Final Rule (45 FR 74846)
This document is a copy of the Federal Register publication of the November 12, 1980 Final Rule for the Standards of Performance for New Stationary Sources; Ammonium Sulfate Manufacture.
-
Ethylene Production Maximum Achievable Control Technology (MACT) Compliance Manual
This July 2006 document is intended to help owners and operators of ethylene processes understand and comply with EPA's maximum achievable control technology standards promulgated on July 12, 2002, as amended on April 13, 2005 and April 20, 2006.
-
National Emission Standards for Hazardous Air Pollutants (NESHAP); Standard for Vinyl Chloride: 1976 Final Rule (41 FR 46559)
This document is a copy of the Federal Register publication of the October 21, 1976 Final Rule for the National Emission Standards for Hazardous Air Pollutants (NESHAP) for Vinyl Chloride.
-
Residual Risk Assessment for the Industrial Process Cooling Towers Source Category
The methodology and results of the residual risk assessment performed for the Industrial Process Cooling Towers (IPCT) source
category. -
Notice of Alternative Work Practice for Asbestos Cement Pipe Replacement
Soliciting comments