Science & Technology

SW-846 Test Method 0050: Isokinetic Hydrogen Chloride and Chlorine Emission Sampling Train

procedure used in the collection of hydrogen chloride (HCl) and chlorine (Cl2) in stack gas emission samples from hazardous waste incinerators and municipal waste combustors

SW-846 Test Method 0051: Midget Impinger Hydrogen Chloride and Chlorine Emission Sampling Train

procedure used in the collection of hydrogen chloride (HCl) and chlorine (Cl2) in stack gas emission samples from hazardous waste incinerators and municipal waste combustors

SW-846 Test Method 0060: Determination of Metals in Stack Emissions

pProcedure used to determine the concentration of metals in stack emissions from hazardous waste incinerators and similar combustion processe.s

SW-846 Test Method 0061: Determination of Hexavalent Chromium Emissions from Stationary Sources

determination of hexavalent chromium emissions from hazardous waste incinerators, municipal waste incinerators, municipal waste combustors, and sewage sludge incinerators

SW-846 Test Method 1110A: Corrosivity Toward Steel

procedure to measure the corrosivity toward steel of both aqueous and nonaqueous liquid wastes

SW-846 Test Method 1310B: Extraction Procedure (EP) Toxicity Test Method and Structural Integrity Test

procedure used to determine whether a waste exhibits the characteristic of EP Toxicity or to simulate the leaching which a waste may undergo if disposed of in a sanitary landfill

SW-846 Test Method 0010: Modified Method 5 Sampling Train

procedure used in determination of Destruction and Removal Efficiency (DRE) of semivolatile Principal Organic Hazardous Compounds (POHCs) from incineration systems

SW-846 Test Method 1312: Synthetic Precipitation Leaching Procedure

method designed to determine the mobility of both organic and inorganic analytes present in liquids, soils, and wastes

SW-846 Test Method 1320: Multiple Extraction Procedure

this is designed to simulate the leaching that a waste will undergo from repetitive precipitation of acid rain on an improperly designed sanitary landfill

SW-846 Test Method 1330A: Extraction Procedure for Oily Wastes

method to determine the mobile metal concentration (MMC) in oily wastes like API separator sludges, rag oils, slop oil emulsions, and others derived from petroleum refining

SW-846 Test Method 9040C: pH Electrometric Measurement

procedure to measure the pH of aqueous wastes and those multiphase wastes where the aqueous phase constitutes at least 20% of the total volume of the waste

SW-846 Test Method 9045D: Soil and Waste pH

electrometric procedure for measuring pH in soils and waste samples, including solids, sludges, or non-aqueous liquids

SW-846 Test Method 9060A: Total Organic Carbon

provides method to determine the concentration of organic carbon in ground water, surface and saline waters, and domestic and industrial wastes

SW-846 Test Method 9070A: n-Hexane Extractable Materials (HEM) for Aqueous Samples

method on n-hexane extractable material (HEM), which refers to Method 1664, Revision A, Publication No. EPA-821-R-98-002

SW-846 Test Method 9071B: n-Hexane Extractable Material (HEM) for Sludge, Sediment, and Solid Samples

procedure used to quantify low concentrations of oil and grease in soil, sediments, sludges, and other solid materials amenable to chemical drying and solvent extraction

SW-846 Test Method 9095B: Paint Filter Liquids Test

method used to detect the presence of free liquids in a representative sample of waste to determine compliance with 40 CFR 264.314 and 265.314

SW-846 Test Method 8327: Per-and Polyfluoroalkyl Substances (PFAS) by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

Method procedures written and performed by analyst trained in the basic principles of chemical analysis and in the use of the subject technology.