Superfund Analytical Methods (SFAM01.1)

The Superfund CLP Organic and Inorganic analytical services are presented in the Superfund Analytical Methods (SFAM01.1) Statement of Work (SOW). This SOW defines the analytical methods for the isolation, detection, and quantitative measurement of 54 Trace Volatiles [5 analytes by Selected Ion Monitoring (SIM)], 54 Low/Medium Volatiles, 71 Semivolatiles (20 analytes by SIM), 21 Pesticides, 9 Aroclors, 23 metals (including Mercury), Cyanide, Anions, Hexavalent Chromium, and Total Organic Carbon (TOC) in aqueous/water, soil/sediment, waste, or wipe samples as applicable. In addition, the SOW specifies procedures for percent solids, pH and the leaching of samples by the Toxicity Characteristic Leaching Procedures (TCLP) and the Synthetic Precipitation Leaching Procedure (SPLP).

• SFAM01.0 Exhibits A-C (pdf) (May 2019)
• SFAM01.0 Exhibit D Introduction and General (pdf) (May 2019)
• SFAM01.0 Exhibit D Organic Methods (pdf) (May 2019)
• SFAM01.0 Exhibit D Inorganic Methods (pdf) (May 2019)
• SFAM01.0 Exhibits E-H (pdf) (May 2019)
• SFAM01.0 Appendices A-D (pdf) (May 2019)
• SFAM01.1 (pdf) (November 2020)

Additional Supporting Documents

• Superfund CLP SFAM Analytical Services Fact Sheet (pdf) (May 2021)
• Superfund CLP SFAM01.1 Target Analyte List_ June 2021 (pdf)
• Superfund CLP SFAM01.1 Target Analyte List_ June 2021 (xlsx)