Search Frequent Questions

Filter By:

Active filters:

Remove all filters

Displaying 1 - 15 of 99 results

  • What if the quantity in the process fluctuates?

    What if the quantity in the process fluctuates? I may not have a threshold quantity now, but I will intermittently exceed the threshold quantity. You do not need to comply with the rule and file an RMP unless you have more than threshold quantity in a process; however, once you…

    • Last published:

  • Why are industries exempt under OSHA's PSM subject to RMP?

    The Program 3 prevention program requirements under 40 CFR Part 68 are almost identical to the requirements of OSHA's process safety management (PSM) standard. OSHA exempts certain industries from the PSM standard. Why does EPA not exempt those same industries from the CAA §112(r) risk management program requirements? EPA and…

    • Last published:

  • How often must compliance audits be performed?

    How often must owners or operators of stationary sources subject to the risk management program regulations perform compliance audits? The regulations at 40 CFR §§68.58(a) and 68.79(a) state that owners or operators must certify that they have evaluated compliance with the applicable prevention program provisions at least once every three…

    • Last published:

  • Process identification and distance between vessels

    How far apart do separate vessels have to be to be considered different processes? There is no hard and fast rule for how great this distance should be before you do not need to consider the vessels as part of one process. Two vessels at opposite ends of a large…

    • Last published:

  • Should tank capacity be considered when determining thresholds?

    When determining whether a threshold amount of a regulated substance is present in a process (e.g., a tank), must the owner or operator of a stationary source consider the total capacity of the process, or the actual amount of regulated substance contained in the process? The threshold determination is based…

    • Last published:

  • Updating RMP if EPA lists a new substance

    What if EPA lists a new substance? You will have three years from the date on which the new listing is effective to come into compliance for any process that is covered because EPA has listed a new substance.

    • Last published:

  • What does "same industrial group" mean?

    Operations at a site that belong to the same three-digit North American Industry Classification System (NAICS) code prefix (which has replaced the old SIC codes) belong to the “same industrial group. In addition, where one or more operations at the site serve primarily as support facilities for the main operation…

    • Last published:

  • Do Program 1 processes have to complete a process hazard analysis?

    Do owners or operators of Program 1 processes have to complete a process hazard analysis? No. The Program 1 requirements do not include a process hazard analysis (40 CFR §68.12(b)). Program 3 processes require completion of a process hazard analysis (40 CFR §68.12(d)(3)) while Program 2 processes must complete a…

    • Last published:

  • Is a hazard review synonymous with a process hazard analysis (PHA)?

    The prevention program requirements under 40 CFR Part 68, Subparts C and D, include hazard reviews and process hazard analyses. Is a hazard review synonymous with a process hazard analysis (PHA)? No. A hazard review is different from a PHA. A hazard review is part of the Program 2 prevention…

    • Last published:

  • Hot Work Definition and Requirements

    Facilities subject to the Program 3 Prevention Program requirements in 40 CFR Part 68 must include in their Risk Management Plan the date of the most recent review or revision of hot work permit procedures in Section 7.13. What is considered hot work and what are the requirements related to…

    • Last published:

  • Do I have to conduct incident investigations of releases resulting from theft?

    The incident investigation provisions of 40 CFR Part 68 (§§68.60 and 68.81) require facilities to investigate incidents that resulted in or could reasonably have resulted in a catastrophic release. Are covered facilities required to perform incident investigations of releases resulting from theft of covered substances, such as anhydrous ammonia? If…

    • Last published:

  • How did the January 6, 1998, final rule affect the definition of stationary source?

    How did the January 6, 1998, final rule ( 63 FR 640 ) affect the definition of stationary source, as it relates to the transportation exemption? The January 6, 1998 final rule amended the regulatory definition of stationary source by removing previous references to "active shipping papers" and "temporary storage"…

    • Last published:

  • Hydrochloric acid and hydrogen chloride listed separately

    Why are hydrochloric acid and hydrogen chloride listed separately in the list of regulated substances at 40 CFR §68.130? The aqueous form (hydrochloric acid) and the anhydrous form of this chemical (hydrogen chloride) have been assigned different thresholds.

    • Last published:

  • Must separate amounts of regulated substances be aggregated for threshold determinations?

    Drums containing regulated substances (listed in 40 CFR §68.130) are stored in several separate locations at a stationary source and there is no possibility that an accidental release in any of the individual storage areas would impact any of the other storage areas. Must the overall amount of the regulated…

    • Last published:

  • Does the chlorine listing apply only to gaseous forms of chlorine?

    There is no qualifier attached to the listing for chlorine (40 CFR §68.130). The listing, therefore, applies to chlorine (CAS number 7782-50-5), regardless of physical state.

    • Last published: